Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Quentin Schulz <quentin.schulz@bootlin.com>
To:     alexandre.belloni@bootlin.com, ralf@linux-mips.org,
        paul.burton@mips.com, jhogan@kernel.org, robh+dt@kernel.org,
        mark.rutland@arm.com, davem@davemloft.net
Cc:     kishon@ti.com, andrew@lunn.ch, f.fainelli@gmail.com,
        linux-mips@linux-mips.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
        allan.nielsen@microsemi.com, thomas.petazzoni@bootlin.com,
        Quentin Schulz <quentin.schulz@bootlin.com>
Subject: [PATCH 09/10] phy: add driver for Microsemi Ocelot SerDes muxing
Date:   Mon, 30 Jul 2018 14:43:54 +0200
Message-Id: <3c715bef2e6b704a3d9adb3458b62e1a633e82bf.1532954208.git-series.quentin.schulz@bootlin.com>
In-Reply-To: <cover.aa759035f6eefdd0bb2a5ae335dab5bd5399bd46.1532954208.git-series.quentin.schulz@bootlin.com>
References: <cover.aa759035f6eefdd0bb2a5ae335dab5bd5399bd46.1532954208.git-series.quentin.schulz@bootlin.com>
In-Reply-To: <cover.aa759035f6eefdd0bb2a5ae335dab5bd5399bd46.1532954208.git-series.quentin.schulz@bootlin.com>
References: <cover.aa759035f6eefdd0bb2a5ae335dab5bd5399bd46.1532954208.git-series.quentin.schulz@bootlin.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The Microsemi Ocelot can mux SerDes lanes (aka macros) to different
switch ports or even make it act as a PCIe interface.

This adds support for the muxing of the SerDes.

Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
---
 drivers/phy/Kconfig                  |   1 +-
 drivers/phy/Makefile                 |   1 +-
 drivers/phy/mscc/Kconfig             |  11 +-
 drivers/phy/mscc/Makefile            |   5 +-
 drivers/phy/mscc/phy-ocelot-serdes.c | 314 ++++++++++++++++++++++++++++-
 5 files changed, 332 insertions(+)
 create mode 100644 drivers/phy/mscc/Kconfig
 create mode 100644 drivers/phy/mscc/Makefile
 create mode 100644 drivers/phy/mscc/phy-ocelot-serdes.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 5c8d452..c89d3ef 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -48,6 +48,7 @@ source "drivers/phy/lantiq/Kconfig"
 source "drivers/phy/marvell/Kconfig"
 source "drivers/phy/mediatek/Kconfig"
 source "drivers/phy/motorola/Kconfig"
+source "drivers/phy/mscc/Kconfig"
 source "drivers/phy/qualcomm/Kconfig"
 source "drivers/phy/ralink/Kconfig"
 source "drivers/phy/renesas/Kconfig"
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 84e3bd9..ce8339f 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -18,6 +18,7 @@ obj-y					+= broadcom/	\
 					   hisilicon/	\
 					   marvell/	\
 					   motorola/	\
+					   mscc/	\
 					   qualcomm/	\
 					   ralink/	\
 					   samsung/	\
diff --git a/drivers/phy/mscc/Kconfig b/drivers/phy/mscc/Kconfig
new file mode 100644
index 0000000..2e2a466
--- /dev/null
+++ b/drivers/phy/mscc/Kconfig
@@ -0,0 +1,11 @@
+#
+# Phy drivers for Microsemi devices
+#
+
+config PHY_OCELOT_SERDES
+	tristate "SerDes PHY driver for Microsemi Ocelot"
+	select GENERIC_PHY
+	depends on OF
+	depends on MFD_SYSCON
+	help
+	  Enable this for supporting SerDes muxing with Microsemi Ocelot.
diff --git a/drivers/phy/mscc/Makefile b/drivers/phy/mscc/Makefile
new file mode 100644
index 0000000..e147491
--- /dev/null
+++ b/drivers/phy/mscc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Microsemi phy drivers.
+#
+
+obj-$(CONFIG_PHY_OCELOT_SERDES) := phy-ocelot-serdes.o
diff --git a/drivers/phy/mscc/phy-ocelot-serdes.c b/drivers/phy/mscc/phy-ocelot-serdes.c
new file mode 100644
index 0000000..e87c400
--- /dev/null
+++ b/drivers/phy/mscc/phy-ocelot-serdes.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * SerDes PHY driver for Microsemi Ocelot
+ *
+ * Copyright (c) 2018 Microsemi
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <soc/mscc/ocelot_hsio.h>
+
+#define SERDES1G_MAX	6
+#define SERDES6G_MAX	3
+#define SERDES_MAX	(SERDES1G_MAX + SERDES6G_MAX)
+
+enum serdes_type {
+	SERDES1G = 1,
+	SERDES6G = 6,
+};
+
+struct serdes_ctrl {
+	struct regmap		*regs;
+	struct device		*dev;
+	struct phy		*phys[SERDES_MAX];
+};
+
+struct serdes_macro {
+	enum serdes_type	type;
+	u8			idx;
+	/* Not used when in QSGMII or PCIe mode */
+	int			port;
+	struct serdes_ctrl	*ctrl;
+};
+
+#define MCB_S1G_CFG_TIMEOUT     50
+
+static int __serdes_write_mcb_s1g(struct regmap *regmap, u8 macro, u32 op)
+{
+	unsigned int regval;
+
+	regmap_write(regmap, HSIO_MCB_S1G_ADDR_CFG, op |
+		     HSIO_MCB_S1G_ADDR_CFG_SERDES1G_ADDR(BIT(macro)));
+
+	return regmap_read_poll_timeout(regmap, HSIO_MCB_S1G_ADDR_CFG, regval,
+					(regval & op) != op, 100,
+					MCB_S1G_CFG_TIMEOUT * 1000);
+}
+
+static int serdes_commit_mcb_s1g(struct regmap *regmap, u8 macro)
+{
+	return __serdes_write_mcb_s1g(regmap, macro,
+		HSIO_MCB_S1G_ADDR_CFG_SERDES1G_WR_ONE_SHOT);
+}
+
+static int serdes_update_mcb_s1g(struct regmap *regmap, u8 macro)
+{
+	return __serdes_write_mcb_s1g(regmap, macro,
+		HSIO_MCB_S1G_ADDR_CFG_SERDES1G_RD_ONE_SHOT);
+}
+
+static int serdes_init_s1g(struct regmap *regmap, u8 serdes)
+{
+	int ret;
+
+	ret = serdes_update_mcb_s1g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(regmap, HSIO_S1G_COMMON_CFG,
+			   HSIO_S1G_COMMON_CFG_SYS_RST |
+			   HSIO_S1G_COMMON_CFG_ENA_LANE |
+			   HSIO_S1G_COMMON_CFG_ENA_ELOOP |
+			   HSIO_S1G_COMMON_CFG_ENA_FLOOP,
+			   HSIO_S1G_COMMON_CFG_ENA_LANE);
+
+	regmap_update_bits(regmap, HSIO_S1G_PLL_CFG,
+			   HSIO_S1G_PLL_CFG_PLL_FSM_ENA |
+			   HSIO_S1G_PLL_CFG_PLL_FSM_CTRL_DATA_M,
+			   HSIO_S1G_PLL_CFG_PLL_FSM_CTRL_DATA(200) |
+			   HSIO_S1G_PLL_CFG_PLL_FSM_ENA);
+
+	regmap_update_bits(regmap, HSIO_S1G_MISC_CFG,
+			   HSIO_S1G_MISC_CFG_DES_100FX_CPMD_ENA |
+			   HSIO_S1G_MISC_CFG_LANE_RST,
+			   HSIO_S1G_MISC_CFG_LANE_RST);
+
+	ret = serdes_commit_mcb_s1g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(regmap, HSIO_S1G_COMMON_CFG,
+			   HSIO_S1G_COMMON_CFG_SYS_RST,
+			   HSIO_S1G_COMMON_CFG_SYS_RST);
+
+	regmap_update_bits(regmap, HSIO_S1G_MISC_CFG,
+			   HSIO_S1G_MISC_CFG_LANE_RST, 0);
+
+	ret = serdes_commit_mcb_s1g(regmap, serdes);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+struct serdes_mux {
+	enum serdes_type	type;
+	u8			idx;
+	u8			port;
+	enum phy_mode		mode;
+	u32			mask;
+	u32			mux;
+};
+
+#define SERDES_MUX(_type, _idx, _port, _mode, _mask, _mux) {	\
+	.type = _type,						\
+	.idx = _idx,					\
+	.port = _port,						\
+	.mode = _mode,						\
+	.mask = _mask,						\
+	.mux = _mux,						\
+}
+
+static const struct serdes_mux ocelot_serdes_muxes[] = {
+	SERDES_MUX(SERDES1G, 0, 0, PHY_MODE_SGMII, 0, 0),
+	SERDES_MUX(SERDES1G, 1, 1, PHY_MODE_SGMII, HSIO_HW_CFG_DEV1G_5_MODE, 0),
+	SERDES_MUX(SERDES1G, 1, 5, PHY_MODE_SGMII, HSIO_HW_CFG_QSGMII_ENA |
+		   HSIO_HW_CFG_DEV1G_5_MODE, HSIO_HW_CFG_DEV1G_5_MODE),
+	SERDES_MUX(SERDES1G, 2, 2, PHY_MODE_SGMII, HSIO_HW_CFG_DEV1G_4_MODE, 0),
+	SERDES_MUX(SERDES1G, 2, 4, PHY_MODE_SGMII, HSIO_HW_CFG_QSGMII_ENA |
+		   HSIO_HW_CFG_DEV1G_4_MODE, HSIO_HW_CFG_DEV1G_4_MODE),
+	SERDES_MUX(SERDES1G, 3, 3, PHY_MODE_SGMII, HSIO_HW_CFG_DEV1G_6_MODE, 0),
+	SERDES_MUX(SERDES1G, 3, 6, PHY_MODE_SGMII, HSIO_HW_CFG_QSGMII_ENA |
+		   HSIO_HW_CFG_DEV1G_6_MODE, HSIO_HW_CFG_DEV1G_6_MODE),
+	SERDES_MUX(SERDES1G, 4, 4, PHY_MODE_SGMII, HSIO_HW_CFG_QSGMII_ENA |
+		   HSIO_HW_CFG_DEV1G_4_MODE | HSIO_HW_CFG_DEV1G_9_MODE, 0),
+	SERDES_MUX(SERDES1G, 4, 9, PHY_MODE_SGMII, HSIO_HW_CFG_DEV1G_4_MODE |
+		   HSIO_HW_CFG_DEV1G_9_MODE, HSIO_HW_CFG_DEV1G_4_MODE |
+		   HSIO_HW_CFG_DEV1G_9_MODE),
+	SERDES_MUX(SERDES1G, 5, 5, PHY_MODE_SGMII, HSIO_HW_CFG_QSGMII_ENA |
+		   HSIO_HW_CFG_DEV1G_5_MODE | HSIO_HW_CFG_DEV2G5_10_MODE, 0),
+	SERDES_MUX(SERDES1G, 5, 10, PHY_MODE_SGMII, HSIO_HW_CFG_PCIE_ENA |
+		   HSIO_HW_CFG_DEV1G_5_MODE | HSIO_HW_CFG_DEV2G5_10_MODE,
+		   HSIO_HW_CFG_DEV1G_5_MODE | HSIO_HW_CFG_DEV2G5_10_MODE),
+	SERDES_MUX(SERDES6G, 0, 4, PHY_MODE_QSGMII, HSIO_HW_CFG_QSGMII_ENA,
+		   HSIO_HW_CFG_QSGMII_ENA),
+	SERDES_MUX(SERDES6G, 0, 5, PHY_MODE_QSGMII, HSIO_HW_CFG_QSGMII_ENA,
+		   HSIO_HW_CFG_QSGMII_ENA),
+	SERDES_MUX(SERDES6G, 0, 6, PHY_MODE_QSGMII, HSIO_HW_CFG_QSGMII_ENA,
+		   HSIO_HW_CFG_QSGMII_ENA),
+	SERDES_MUX(SERDES6G, 0, 7, PHY_MODE_SGMII, HSIO_HW_CFG_QSGMII_ENA, 0),
+	SERDES_MUX(SERDES6G, 0, 7, PHY_MODE_QSGMII, HSIO_HW_CFG_QSGMII_ENA,
+		   HSIO_HW_CFG_QSGMII_ENA),
+	SERDES_MUX(SERDES6G, 1, 8, PHY_MODE_SGMII, 0, 0),
+	SERDES_MUX(SERDES6G, 2, 10, PHY_MODE_SGMII, HSIO_HW_CFG_PCIE_ENA |
+		   HSIO_HW_CFG_DEV2G5_10_MODE, 0),
+	SERDES_MUX(SERDES6G, 2, 10, PHY_MODE_PCIE, HSIO_HW_CFG_PCIE_ENA,
+		   HSIO_HW_CFG_PCIE_ENA),
+};
+
+static int serdes_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct serdes_macro *macro = phy_get_drvdata(phy);
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(ocelot_serdes_muxes); i++) {
+		if (macro->type != ocelot_serdes_muxes[i].type ||
+		    macro->idx != ocelot_serdes_muxes[i].idx ||
+		    mode != ocelot_serdes_muxes[i].mode)
+			continue;
+
+		if (mode != PHY_MODE_QSGMII &&
+		    macro->port != ocelot_serdes_muxes[i].port)
+			continue;
+
+		ret = regmap_update_bits(macro->ctrl->regs, HSIO_HW_CFG,
+					 ocelot_serdes_muxes[i].mask,
+					 ocelot_serdes_muxes[i].mux);
+		if (ret)
+			return ret;
+
+		if (macro->type == SERDES1G)
+			return serdes_init_s1g(macro->ctrl->regs, macro->idx);
+
+		/* SERDES6G and PCIe not supported yet */
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static const struct phy_ops serdes_ops = {
+	.set_mode	= serdes_set_mode,
+	.owner		= THIS_MODULE,
+};
+
+static struct phy *serdes_simple_xlate(struct device *dev,
+				       struct of_phandle_args *args)
+{
+	enum serdes_type type;
+	int port, i;
+	u8 idx;
+	struct serdes_ctrl *ctrl = dev_get_drvdata(dev);
+
+	if (args->args_count != 3)
+		return ERR_PTR(-EINVAL);
+
+	type = args->args[0];
+	idx = args->args[1];
+	port = args->args[2];
+
+	for (i = 0; i < SERDES_MAX; i++) {
+		struct serdes_macro *macro = phy_get_drvdata(ctrl->phys[i]);
+
+		if (type != macro->type)
+			continue;
+		if (idx != macro->idx)
+			continue;
+
+		/* SERDES6G_0 is the only SerDes capable of QSGMII */
+		if ((type == SERDES1G || macro->idx != 0) && macro->port >= 0)
+			return ERR_PTR(-EBUSY);
+
+		macro->port = port;
+		return ctrl->phys[i];
+	}
+
+	return ERR_PTR(-ENODEV);
+}
+
+static int serdes_phy_create(struct serdes_ctrl *ctrl, u8 idx,
+			     enum serdes_type type, struct phy **phy)
+{
+	struct serdes_macro *macro;
+
+	*phy = devm_phy_create(ctrl->dev, NULL, &serdes_ops);
+	if (IS_ERR(*phy))
+		return PTR_ERR(*phy);
+
+	macro = devm_kzalloc(ctrl->dev, sizeof(*macro), GFP_KERNEL);
+	if (!macro)
+		return -ENOMEM;
+
+	macro->idx = idx;
+	macro->type = type;
+	macro->ctrl = ctrl;
+	macro->port = -1;
+
+	phy_set_drvdata(*phy, macro);
+
+	return 0;
+}
+
+static int serdes_probe(struct platform_device *pdev)
+{
+	struct phy_provider *provider;
+	struct serdes_ctrl *ctrl;
+	int i, ret;
+
+	ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL);
+	if (!ctrl)
+		return -ENOMEM;
+
+	ctrl->dev = &pdev->dev;
+	ctrl->regs = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	if (!ctrl->regs)
+		return -ENODEV;
+
+	for (i = 0; i < SERDES1G_MAX; i++) {
+		ret = serdes_phy_create(ctrl, i, SERDES1G, &ctrl->phys[i]);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < SERDES6G_MAX; i++) {
+		ret = serdes_phy_create(ctrl, i, SERDES6G,
+					&ctrl->phys[SERDES1G_MAX + i]);
+		if (ret)
+			return ret;
+	}
+
+	dev_set_drvdata(&pdev->dev, ctrl);
+
+	provider = devm_of_phy_provider_register(ctrl->dev,
+						 serdes_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id serdes_ids[] = {
+	{ .compatible = "mscc,vsc7514-serdes", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, serdes_ids);
+
+static struct platform_driver mscc_ocelot_serdes = {
+	.probe		= serdes_probe,
+	.driver		= {
+		.name	= "mscc,ocelot-serdes",
+		.of_match_table = of_match_ptr(serdes_ids),
+	},
+};
+
+module_platform_driver(mscc_ocelot_serdes);
+
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@bootlin.com>");
+MODULE_DESCRIPTION("SerDes driver for Microsemi Ocelot");
+MODULE_LICENSE("Dual MIT/GPL");
-- 
git-series 0.9.1