Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   djw@t-chip.com.cn
To:     linux-rockchip@lists.infradead.org
Cc:     Wayne Chou <zxf@t-chip.com.cn>, Levin Du <djw@t-chip.com.cn>,
        Heiko Stuebner <heiko@sntech.de>,
        Simon Xue <xxm@rock-chips.com>, Liang Chen <cl@rock-chips.com>,
        Sugar Zhang <sugar.zhang@rock-chips.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Robin Murphy <robin.murphy@arm.com>,
        Rob Herring <robh+dt@kernel.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        David Wu <david.wu@rock-chips.com>,
        Finley Xiao <finley.xiao@rock-chips.com>,
        Rocky Hao <rocky.hao@rock-chips.com>,
        Will Deacon <will.deacon@arm.com>, devicetree@vger.kernel.org,
        linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        "David S. Miller" <davem@davemloft.net>,
        Klaus Goger <klaus.goger@theobroma-systems.com>,
        linux-kernel@vger.kernel.org, Joseph Chen <chenjh@rock-chips.com>,
        Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v4 0/4] Add sdmmc UHS support to ROC-RK3328-CC board.
Date:   Tue, 31 Jul 2018 13:59:18 +0800
Message-Id: <1533016762-5268-1-git-send-email-djw@t-chip.com.cn>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Levin Du <djw@t-chip.com.cn>


Hi all, this is an attemp to add sdmmc UHS support to the
ROC-RK3328-CC board.

This patch series adds a new compatible `rockchip,rk3328-grf-gpio` to
the gpio-syscon driver, which currently only support for the access of
the GPIO_MUTE pin in RK3328. Support for HDMI pins can be added later on
perhaps by writing a standalone driver.

A new GRF GPIO controller named `grf_gpio` is defined in rk3328.dtsi so
that all RK3328 boards has access to it.

The ROC-RK3328-CC board use the new gpio <&grf_gpio 0> in gpio-regulator
to control the signal voltage of the sdmmc. It is essential for UHS
support which requires 1.8V signal voltage.

Many thanks to the Linux people!

Changes in v4:
- Use binding of "rockchip,rk3328-grf-gpio"
- Use <&grf_gpio 0> to refer to the GPIO_MUTE pin.

Changes in v3:
- Change from general gpio-syscon to specific rk3328-gpio-mute
- Use dedicated "rockchip,rk3328-gpio-mute" driver
- Use <&gpio_mute 0> instead of <&gpio_mute 1> to refer to the GPIO_MUTE pin.

Changes in v2:
- Rename gpio_syscon10 to gpio_mute in doc
- Rename gpio_syscon10 to gpio_mute in rk3328.dtsi
- Rename gpio_syscon10 to gpio_mute in rk3328-roc-cc.dts

Changes in v1:
- Refactured for general gpio-syscon usage for Rockchip SoCs.
- Add doc rockchip,gpio-syscon.txt
- Split from V0 and add to rk3328.dtsi for general use.
- Split from V0.
- Split into small patches
- Sort dts properties in sdmmc node

Levin Du (4):
  gpio: syscon: rockchip: add GRF GPIO support for rk3328
  arm64: dts: rockchip: add GRF GPIO controller to rk3328
  arm64: dts: rockchip: add io-domain to roc-rk3328-cc
  arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc

 .../bindings/gpio/rockchip,rk3328-grf-gpio.txt     | 32 ++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts     | 34 ++++++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3328.dtsi           |  6 ++++
 drivers/gpio/gpio-syscon.c                         | 31 ++++++++++++++++++++
 4 files changed, 103 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.txt

-- 
2.7.4