Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261622AbTIYAnF (ORCPT ); Wed, 24 Sep 2003 20:43:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261623AbTIYAnE (ORCPT ); Wed, 24 Sep 2003 20:43:04 -0400 Received: from h139-142-214-162.gtcust.grouptelecom.net ([139.142.214.162]:40966 "EHLO smtp.atrium.ca") by vger.kernel.org with ESMTP id S261622AbTIYAmv (ORCPT ); Wed, 24 Sep 2003 20:42:51 -0400 Message-id: Date: Wed, 24 Sep 2003 19:45:01 -0500 Subject: Re: 2.6.0-test5-mm3 Promise SuperTrak SX6000 unrecognized To: Samuel Flory Cc: linux-kernel@vger.kernel.org From: "Dave Poirier" References: <3F722C0C.1050901@rackable.com> In-Reply-To: <3F722C0C.1050901@rackable.com> MIME-Version: 1.0 Content-type: multipart/mixed; boundary="--=_--0061494d.00614929.bb97a4bd" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 16448 Lines: 414 This is a multi-part message in MIME format. ----=_--0061494d.00614929.bb97a4bd Content-type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Samuel Flory writes: >Dave Poirier wrote: >(snip) > > Have you tried the generic i2o driver? 'Modprobe i2o_scsi' (snip) Yes, without positive result. I took the liberty of attaching `dmesg` output. I have SCSI disk and cdrom support, i2o (all selected, block, scsi, pci, etc), with both selected and unselected Promise 20276 support. The BIOS of the controller is set to "Other OS" and configured with one RAID 1 array of 2 identical 80GB drives. As you will be able to see in the dmesg output, i2o scsi did not find any controller. -Dave ----=_--0061494d.00614929.bb97a4bd Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Linux version 2.6.0-test5-mm3 (root=40clr) (gcc version 2.95.4 20011002 (De= bian prerelease)) =238 SMP Wed Sep 24 14:14:21 CDT 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data) BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) =40 0x000f9fb0= ACPI: XSDT (v001 A M I OEMXSDT 0x06000311 MSFT 0x00000097) =40 0x7ff30100= ACPI: FADT (v003 A M I OEMFACP 0x06000311 MSFT 0x00000097) =40 0x7ff30290= ACPI: MADT (v001 A M I OEMAPIC 0x06000311 MSFT 0x00000097) =40 0x7ff30390= ACPI: OEMB (v001 A M I OEMBIOS 0x06000311 MSFT 0x00000097) =40 0x7ff40040= ACPI: DSDT (v001 P4P81 P4P81072 0x00000072 INTL 0x02002026) =40 0x00000000= ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id=5B0x01=5D lapic_id=5B0x00=5D enabled) Processor =230 15:2 APIC version 20 ACPI: LAPIC (acpi_id=5B0x02=5D lapic_id=5B0x01=5D enabled) Processor =231 15:2 APIC version 20 ACPI: IOAPIC (id=5B0x02=5D address=5B0xfec00000=5D global_irq_base=5B0x0= =5D) IOAPIC=5B0=5D: Assigned apic_id 2 IOAPIC=5B0=5D: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus=5B0=5D irq=5B0x0=5D global_irq=5B0x2=5D polarity=5B0= x0=5D trigger=5B0x0=5D) ACPI: INT_SRC_OVR (bus=5B0=5D irq=5B0x9=5D global_irq=5B0x9=5D polarity=5B0= x1=5D trigger=5B0x3=5D) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=3DLinux ro root=3D303 current: c0420900 current->thread_info: c0484000 Initializing CPU=230 PID hash table entries: 4096 (order 12: 32768 bytes) Detected 2406.115 MHz processor. Console: colour VGA+ 80x25 Memory: 903136k/917504k available (2556k kernel code, 13588k reserved, 1041= k data, 328k init, 0k highmem) Calibrating delay loop... 4751.36 BogoMIPS Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU=230. CPU=230: Intel P4/Xeon Extended MCE MSRs (12) available CPU=230: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 per-CPU timeslice cutoff: 1462.47 usecs. task migration cache decay timeout: 2 msecs. enabled ExtINT on CPU=230 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU=231 masked ExtINT on CPU=231 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4800.51 BogoMIPS CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU=231. CPU=231: Intel P4/Xeon Extended MCE MSRs (12) available CPU=231: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Total of 2 processors activated (9551.87 BogoMIPS). cpu_sibling_map=5B0=5D =3D 1 cpu_sibling_map=5B1=5D =3D 0 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 n= ot connected. ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D-1 number of MP IRQ sources: 15. number of IO-APIC =232 registers: 24. testing the IO APIC....................... IO APIC =232...... .... register =2300: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register =2301: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2405.0166 MHz. ..... host bus clock speed is 200.0430 MHz. checking TSC synchronization across 2 CPUs: passed. Starting migration thread for cpu 0 Bringing up 1 CPU 1 IS NOW UP=21 Starting migration thread for cpu 1 CPUS done 8 zapping low mappings. NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20030916 IOAPIC=5B0=5D: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:0)= ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge =5BPCI0=5D (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table =5B=5C_SB_.PCI0._PRT=5D ACPI: PCI Interrupt Routing Table =5B=5C_SB_.PCI0.P0P4._PRT=5D ACPI: PCI Interrupt Link =5BLNKA=5D (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKB=5D (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKC=5D (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKD=5D (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKE=5D (IRQs 3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKF=5D (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKG=5D (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link =5BLNKH=5D (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub IOAPIC=5B0=5D: Set PCI routing entry (2-18 -> 0xa9 -> IRQ 18 Mode:1 Active:= 1) 00:00:1f=5BA=5D -> 2-18 -> IRQ 18 IOAPIC=5B0=5D: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:= 1) 00:00:1f=5BB=5D -> 2-17 -> IRQ 17 IOAPIC=5B0=5D: Set PCI routing entry (2-16 -> 0xb9 -> IRQ 16 Mode:1 Active:= 1) 00:00:1d=5BA=5D -> 2-16 -> IRQ 16 IOAPIC=5B0=5D: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:= 1) 00:00:1d=5BB=5D -> 2-19 -> IRQ 19 Pin 2-18 already programmed IOAPIC=5B0=5D: Set PCI routing entry (2-23 -> 0xc9 -> IRQ 23 Mode:1 Active:= 1) 00:00:1d=5BD=5D -> 2-23 -> IRQ 23 Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed IOAPIC=5B0=5D: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:= 1) 00:02:08=5BA=5D -> 2-20 -> IRQ 20 IOAPIC=5B0=5D: Set PCI routing entry (2-21 -> 0xd9 -> IRQ 21 Mode:1 Active:= 1) 00:02:09=5BA=5D -> 2-21 -> IRQ 21 IOAPIC=5B0=5D: Set PCI routing entry (2-22 -> 0xe1 -> IRQ 22 Mode:1 Active:= 1) 00:02:09=5BB=5D -> 2-22 -> IRQ 22 Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-20 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-20 already programmed Pin 2-22 already programmed Pin 2-20 already programmed Pin 2-23 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=3Dnoacpi' or even 'a= cpi=3Doff' radeonfb_pci_register BEGIN radeonfb: ref_clk=3D2700, ref_div=3D60, xclk=3D14300 from BIOS radeonfb: probed DDR SGRAM 65536k videoram radeon_get_moninfo: bios 4 scratch =3D 2000002 radeonfb: ATI Radeon VE QY DDR SGRAM 64 MB radeonfb: DVI port no monitor connected radeonfb: CRT port CRT monitor connected radeonfb_pci_register END pty: 256 Unix98 ptys configured Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.11 Starting balanced_irq VFS: Disk quotas dquot_6.5.1 Installing knfsd (copyright (C) 1996 okir=40monad.swb.de). NTFS driver 2.1.4 =5BFlags: R/O=5D. udf: registering filesystem Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: Maximum main memory to use for agp memory: 816M agpgart: AGP aperture is 64M =40 0xf8000000 =5Bdrm=5D Initialized radeon 1.9.0 20020828 on minor 0 Serial: 8250/16550 driver =24Revision: 1.90 =24 IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) sk98lin: Network Device Driver v6.14 (C)Copyright 1999-2003 Marvell(R). eth0: 3Com Gigabit LOM (3C940) PrefPort:A RlmtMode:Check Link State Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus= =3Dxx hda: ST380011A, ATA DISK drive hdc: Pioneer DVD-ROM ATAPIModel DVD-115 0108, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=3D16383/255/63 hda: hda1 hda2 hda3 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PIONEER Model: DVD-ROM DVD-115 Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 ehci_hcd 0000:00:1d.7: EHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem fc83fc00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: enabled 64bit PCI DMA PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:0: USB hub found hub 1-0:0: 8 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver= v2.1 uhci-hcd 0000:00:1d.0: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci-hcd 0000:00:1d.0: irq 16, io base 0000ef00 uhci-hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected uhci-hcd 0000:00:1d.1: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci-hcd 0000:00:1d.1: irq 19, io base 0000ef20 uhci-hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:0: USB hub found hub 3-0:0: 2 ports detected uhci-hcd 0000:00:1d.2: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci-hcd 0000:00:1d.2: irq 18, io base 0000ef40 uhci-hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:0: USB hub found hub 4-0:0: 2 ports detected uhci-hcd 0000:00:1d.3: UHCI Host Controller PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci-hcd 0000:00:1d.3: irq 16, io base 0000ef80 uhci-hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 hub 5-0:0: USB hub found hub 5-0:0: 2 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 22 i2o: Checking for PCI I2O controllers... I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software I2O Block Storage OSM v0.9 (c) Copyright 1999-2001 Red Hat Software. i2o_block: Checking for Boot device... i2o_block: Checking for I2O Block devices... i2o_scsi.c: Version 0.1.2 chain_pool: 0 bytes =40 f7c29560 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 328k freed Adding 393584k swap on /dev/hda2. Priority:-1 extents:1 warning: process `update' used the obsolete bdflush system call Fix your initscripts? ----=_--0061494d.00614929.bb97a4bd-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/