Received: by 2002:ac0:a5a7:0:0:0:0:0 with SMTP id m36-v6csp5019783imm; Tue, 7 Aug 2018 11:11:14 -0700 (PDT) X-Google-Smtp-Source: AAOMgpf5rdgiS4IYrvhvQCFtylCTu6oVRyv0LR9QdsEpj0gh22+ecmAcN0+kIczR4hTi9GW6XiRW X-Received: by 2002:a63:380d:: with SMTP id f13-v6mr19765915pga.124.1533665474306; Tue, 07 Aug 2018 11:11:14 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1533665474; cv=none; d=google.com; s=arc-20160816; b=YGCM6EDw7jkn9CQG0Lr8539b4BMlC8/OFKMomCkb2Rog8zs4i3Y9yC2UaZGYoEGe4k fNwn+D1AVHVvxT+5Zhn6tCDJoZlyHnyVk8VrPRdUPabPIJI/gA+94SIix6DK8X35JmDp wJ1ktYOHYemW/4wGnarOnJnY2oGUf3vPEdxhAETcDFemUg6oACSaqbNfDJkRv+wyUKPX iWgWMqKeSSrPLZ5Kn1KWxRUtALa1Tidy2f1YJGSG5Jx6CMLOs1A0mohsq7xJF8Pug+ZH 8LW+hQ6KEJTd9gNUNY5j5z9QFvX4c68PawETlnM9SGfEt9UYqMO8/Bly43JZW6VMTsoD akbA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:user-agent:references :message-id:in-reply-to:subject:cc:to:from:date :arc-authentication-results; bh=XQI7Ywt/J3ympnDlb+1XvnbpKIiMyHHULmc2tmgKzgE=; b=DMtNaGJRemmU3N9Q3/2hsGyBpVL1iofMP/Bw+qNLN20MnmSqxJnb1i5Ei3xKp8mVqF Vx8de6KbSasR/a0R63iASHo67xmI5IDNpaOSdMQxbFGKaplRU0I3QuIgCnnw0dQEAvgW z6CWLy4lQ7uyZ9k2LPTeHhST7ZLi1BLB/sTfH8wMbpbU+ErdFS2Wn2E/kOFt/g4Y3gR6 /jLZ4FRwOPLGblHqFxcFeHyCP90++iEv3sWwaFjtm8GlePMQrQWvxjufBqWcEOTyzQFV 6KvwfpeqBxCnGnSXQuihWzW0lMJD/2mmUIcVzKRJyLbyPAabbcvpqvYpzEfaWtHbXCNE 5WaQ== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=redhat.com Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id o66-v6si2154653pfb.125.2018.08.07.11.10.59; Tue, 07 Aug 2018 11:11:14 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=redhat.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2390296AbeHGTyj (ORCPT + 99 others); Tue, 7 Aug 2018 15:54:39 -0400 Received: from mx3-rdu2.redhat.com ([66.187.233.73]:42132 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S2389051AbeHGTyj (ORCPT ); Tue, 7 Aug 2018 15:54:39 -0400 Received: from smtp.corp.redhat.com (int-mx04.intmail.prod.int.rdu2.redhat.com [10.11.54.4]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by mx1.redhat.com (Postfix) with ESMTPS id 80EC240201A3; Tue, 7 Aug 2018 17:39:12 +0000 (UTC) Received: from file01.intranet.prod.int.rdu2.redhat.com (file01.intranet.prod.int.rdu2.redhat.com [10.11.5.7]) by smtp.corp.redhat.com (Postfix) with ESMTPS id 2434F2026DE8; Tue, 7 Aug 2018 17:39:12 +0000 (UTC) Received: from file01.intranet.prod.int.rdu2.redhat.com (localhost [127.0.0.1]) by file01.intranet.prod.int.rdu2.redhat.com (8.14.4/8.14.4) with ESMTP id w77HdCHD018187; Tue, 7 Aug 2018 13:39:12 -0400 Received: from localhost (mpatocka@localhost) by file01.intranet.prod.int.rdu2.redhat.com (8.14.4/8.14.4/Submit) with ESMTP id w77HdABn018183; Tue, 7 Aug 2018 13:39:10 -0400 X-Authentication-Warning: file01.intranet.prod.int.rdu2.redhat.com: mpatocka owned process doing -bs Date: Tue, 7 Aug 2018 13:39:10 -0400 (EDT) From: Mikulas Patocka X-X-Sender: mpatocka@file01.intranet.prod.int.rdu2.redhat.com To: Marcin Wojtas cc: Ard Biesheuvel , Thomas Petazzoni , Joao Pinto , Catalin Marinas , linux-pci@vger.kernel.org, Will Deacon , Russell King - ARM Linux , Linux Kernel Mailing List , Matt Sealey , Jingoo Han , Robin Murphy , linux-arm-kernel@lists.infradead.org Subject: Re: framebuffer corruption due to overlapping stp instructions on arm64 In-Reply-To: Message-ID: References: <99fff4fe-afa9-f12f-a518-472a9dd1c530@arm.com> User-Agent: Alpine 2.02 (LRH 1266 2009-07-14) MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII X-Scanned-By: MIMEDefang 2.78 on 10.11.54.4 X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.5.16 (mx1.redhat.com [10.11.55.6]); Tue, 07 Aug 2018 17:39:12 +0000 (UTC) X-Greylist: inspected by milter-greylist-4.5.16 (mx1.redhat.com [10.11.55.6]); Tue, 07 Aug 2018 17:39:12 +0000 (UTC) for IP:'10.11.54.4' DOMAIN:'int-mx04.intmail.prod.int.rdu2.redhat.com' HELO:'smtp.corp.redhat.com' FROM:'mpatocka@redhat.com' RCPT:'' Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, 7 Aug 2018, Marcin Wojtas wrote: > Ard, Mikulas, > > After some self-caused setup issues I was able to run the test on my > MacchiatoBin with the kernel v4.18-rc8. It's been running for 1h+ now, > loading the CPU to 100% and no single error event... > > I built the binary file with: > gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-gcc -O2 > > Maybe it's the older firmware issue? I have downloaded and built the firmware recently (it has timestamp Jul 30 2018). Do you still have your firmware file "flash-image.bin" that you used, so that I could try it? > Please send the full bootlog with > the very first line after reset. My board rev is v1.3 and I use > mainline UEFI (newest edk2 + edk2-platforms) + newest publicly > available ARM-TF and earliest firmware for this board. > > Best regards, > Marcin This is my bootlog: BootROM - 2.03 Starting CP-0 IOROM 1.07 Booting from SD 0 (0x29) Found valid image at boot postion 0x002 lNOTICE: Starting binary extension NOTICE: SVC: SW Revision 0x0. SVC is not supported mv_ddr: mv_ddr-devel-18.05.0-g84dd1d9 (Jul 30 2018 - 04:58:51 PM) mv_ddr: completed successfully NOTICE: Cold boot NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.4(release):armada-18.05.2:80bbf686 NOTICE: BL1: Built : 17:00:18, Jul 30 2018 NOTICE: BL1: Booting BL2 lNOTICE: BL2: v1.4(release):armada-18.05.2:80bbf686 NOTICE: BL2: Built : 17:00:21, Jul 30 2018 BL2: Initiating SCP_BL2 transfer to SCP NOTICE: SCP_BL2 contains 2 concatenated images NOTICE: Load image to CP1 MSS AP0 NOTICE: Loading MSS image from address 0x4023020 Size 0x135c to MSS at 0xf4280000 NOTICE: Done NOTICE: Load image to AP0 MSS NOTICE: Loading MSS image from address 0x402437c Size 0x1f6c to MSS at 0xf0580000 N FreeRTOS 7.3.0 - Marvell cm3 - A8K release armada-18.05.1 OTICE: Done NOTICE: SCP Image doesn't contain PM firmware NOTICE: BL1: Booting BL31 lNOTICE: MSS PM is not supported in this build NOTICE: BL31: v1.4(release):armada-18.05.2:80bbf686 NOTICE: BL31: Built : 17:00:21, Jul 30 2018 lUEFI firmware (version MARVELL_EFI built at 16:50:27 on Jul 30 2018) Armada 8040 MachiatoBin Platform Init Comphy0-0: PCIE0 5 Gbps Comphy0-1: PCIE0 5 Gbps Comphy0-2: PCIE0 5 Gbps Comphy0-3: PCIE0 5 Gbps Comphy0-4: SFI 10.31 Gbps Comphy0-5: SATA1 5 Gbps Comphy1-0: SGMII1 1.25 Gbps Comphy1-1: SATA2 5 Gbps Comphy1-2: USB3_HOST0 5 Gbps Comphy1-3: SATA3 5 Gbps Comphy1-4: SFI 10.31 Gbps Comphy1-5: SGMII2 3.125 Gbps UTMI PHY 0 initialized to USB Host0 UTMI PHY 1 initialized to USB Host1 UTMI PHY 2 initialized to USB Host0 Succesfully installed protocol interfaces Error: Image at 000BF6F8000 start failed: 00000001 remove-symbol-file /usr/src/git/macchiato/edk2/Build/Armada80x0McBin-AARCH64/RELEASE_GCC5/AARCH64/MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe/DEBUG/AcpiPlatform.dll 0xBF6F9000 Detected w25q32bv SPI flash with page size 256 B, erase size 4 KB, total 4 MB ramdisk:blckio install. Status=Success Connect: PcieRoot(0x0)/Pci(0x0,0x0): Not Found 3h3h3hTianocore/EDK2 firmware version MARVELL_EFI Press ESCAPE for boot options ...error: no suitable video mode found. error: no video mode activated. GNU GRUB version 2.02~beta3-5 /----------------------------------------------------------------------------\||||||||||||||||||||||||||\----------------------------------------------------------------------------/ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, `e' to edit the commands before booting or `c' for a command-line. *Debian GNU/Linux Advanced options for Debian GNU/Linux System setup The highlighted entry will be executed automatically in 5s. The highlighted entry will be executed automatically in 4s. Loading Linux 4.17.11 ... EFI stub: Booting Linux Kernel... EFI stub: Using DTB from configuration table EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081] [ 0.000000] Linux version 4.17.11 (root@leontynka) (gcc version 8.2.0 (Debian 8.2.0-2)) #10 SMP PREEMPT Fri Aug 3 18:29:35 CEST 2018 [ 0.000000] Machine model: Marvell 8040 MACCHIATOBin [ 0.000000] efi: Getting EFI parameters from FDT: [ 0.000000] efi: EFI v2.70 by EDK II [ 0.000000] efi: SMBIOS 3.0=0xbfed0000 ACPI 2.0=0xb6760000 MEMATTR=0xb8c63518 RNG=0xbffdcf98 [ 0.000000] efi: seeding entropy pool [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 26 pages/cpu @ (ptrval) s67096 r8192 d31208 u106496 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031688 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.17.11 root=/dev/mmcblk0p1 ro console=ttyS0,115200 [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] software IO TLB [mem 0xbb810000-0xbf810000] (64MB) mapped at [ (ptrval)- (ptrval)] [ 0.000000] Memory: 4033692K/4192256K available (4860K kernel code, 376K rwdata, 2452K rodata, 384K init, 2178K bss, 158564K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Tasks RCU enabled. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32) [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191] [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32) [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223] [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32) [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255] [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32) [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287] [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.000113] Console: colour dummy device 174x49 [ 0.000124] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.08 BogoMIPS (lpj=83333) [ 0.000129] pid_max: default: 32768 minimum: 301 [ 0.000151] Security Framework initialized [ 0.000154] Yama: becoming mindful. [ 0.000183] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.000199] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.016676] ASID allocator initialised with 65536 entries [ 0.020006] Hierarchical SRCU implementation. [ 0.023435] Remapping and enabling EFI services. [ 0.026680] smp: Bringing up secondary CPUs ... [ 0.043500] Detected PIPT I-cache on CPU1 [ 0.043522] CPU1: Booted secondary processor 0x0000000001 [0x410fd081] [ 0.060176] Detected PIPT I-cache on CPU2 [ 0.060195] CPU2: Booted secondary processor 0x0000000100 [0x410fd081] [ 0.076859] Detected PIPT I-cache on CPU3 [ 0.076872] CPU3: Booted secondary processor 0x0000000101 [0x410fd081] [ 0.076901] smp: Brought up 1 node, 4 CPUs [ 0.076910] SMP: Total of 4 processors activated. [ 0.076913] CPU features: detected: 32-bit EL0 Support [ 0.077194] CPU: All CPU(s) started at EL2 [ 0.077205] alternatives: patching kernel code [ 0.077230] random: get_random_u64 called from compute_layout+0x94/0xe8 with crng_init=0 [ 0.077599] devtmpfs: initialized [ 0.078967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.078975] futex hash table entries: 1024 (order: 5, 131072 bytes) [ 0.079032] pinctrl core: initialized pinctrl subsystem [ 0.079183] SMBIOS 3.0.0 present. [ 0.079191] DMI: Marvell Armada 8040 MacchiatoBin/Armada 8040 MacchiatoBin, BIOS EDK II Jul 30 2018 [ 0.079264] NET: Registered protocol family 16 [ 0.079484] cpuidle: using governor ladder [ 0.079535] cpuidle: using governor menu [ 0.079559] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.079562] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval)) [ 0.079569] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.079681] DMA: preallocated 256 KiB pool for atomic allocations [ 0.082434] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.082669] ACPI: Interpreter disabled. [ 0.082822] reg-fixed-voltage regulator-usb3-vbus0: could not find pctldev for node /cp0/config-space@f2000000/system-controller@440000/pinctrl/xhci0-vbus-pins, deferring probe [ 0.082929] SCSI subsystem initialized [ 0.083033] Registered efivars operations [ 0.083398] clocksource: Switched to clocksource arch_sys_counter [ 0.083517] pnp: PnP ACPI: disabled [ 0.085008] NET: Registered protocol family 2 [ 0.085146] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.085156] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.085213] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.085441] TCP: Hash tables configured (established 32768 bind 32768) [ 0.085492] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.085507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.085713] hw perfevents: unable to count PMU IRQs [ 0.085718] hw perfevents: /ap806/config-space@f0000000/pmu: failed to register PMU devices! [ 0.085823] kvm [1]: 8-bit VMID [ 0.086279] kvm [1]: vgic interrupt IRQ1 [ 0.086339] kvm [1]: Hyp mode initialized successfully [ 0.086649] workingset: timestamp_bits=62 max_order=20 bucket_order=0 [ 0.088566] io scheduler noop registered [ 0.088625] io scheduler cfq registered (default) [ 0.089467] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver [ 0.089690] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver [ 0.089843] armada-cp110-pinctrl f4440000.system-controller:pinctrl: registered pinctrl driver [ 0.091439] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver [ 0.091583] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver [ 0.091736] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver [ 0.091897] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver [ 0.092084] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver [ 0.092247] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver [ 0.092432] mv_xor_v2 f46a0000.xor: Marvell Version 2 XOR driver [ 0.092596] mv_xor_v2 f46c0000.xor: Marvell Version 2 XOR driver [ 0.092685] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.092996] console [ttyS0] disabled [ 0.113364] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 7, base_baud = 12500000) is a 16550A [ 0.777029] console [ttyS0] enabled [ 0.801032] f2702100.serial: ttyS1 at MMIO 0xf2702100 (irq = 26, base_baud = 15625000) is a 16550A [ 0.830524] f4702000.serial: ttyS2 at MMIO 0xf4702000 (irq = 27, base_baud = 15625000) is a 16550A [ 0.839705] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.846129] libphy: Fixed MDIO Bus: probed [ 0.850384] libphy: orion_mdio_bus: probed [ 0.854879] libphy: orion_mdio_bus: probed [ 0.862575] mousedev: PS/2 mouse device common for all mice [ 0.868314] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 [ 0.874446] i2c /dev entries driver [ 0.880187] sdhci: Secure Digital Host Controller Interface driver [ 0.886399] sdhci: Copyright(c) Pierre Ossman [ 0.890777] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.896640] mmc0: Switching to 3.3V signalling voltage failed [ 0.927528] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit [ 0.966330] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit [ 0.976142] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 0.984470] PCI: OF: host bridge /cp0/pcie@f2600000 ranges: [ 0.990120] PCI: OF: IO 0xeff00000..0xeff0ffff -> 0x00000000 [ 0.996083] PCI: OF: MEM 0xc0000000..0xdfffffff -> 0xc0000000 [ 1.002050] PCI: OF: MEM 0x800000000..0x8ffffffff -> 0x800000000 [ 1.008301] mmc0: new high speed MMC card at address 0001 [ 1.008337] armada8k-pcie f2600000.pcie: link up [ 1.013884] mmcblk0: mmc0:0001 8GME4R 7.28 GiB [ 1.018427] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00 [ 1.023036] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB [ 1.029619] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.035652] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB [ 1.041101] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.047085] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB, chardev (250:0) [ 1.053256] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff] [ 1.067452] pci_bus 0000:00: root bus resource [mem 0x800000000-0x8ffffffff] [ 1.074559] mmcblk0: p1 p2 p3 [ 1.077642] pci 0000:00:00.0: disabling Extended Tags (this device can't handle them) [ 1.097253] pci 0000:00:00.0: BAR 9: assigned [mem 0x800000000-0x80fffffff 64bit pref] [ 1.105218] pci 0000:00:00.0: BAR 0: assigned [mem 0x810000000-0x8100fffff 64bit] [ 1.112749] pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc00fffff] [ 1.119578] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.125712] pci 0000:01:00.0: BAR 0: assigned [mem 0x800000000-0x80fffffff 64bit pref] [ 1.133705] pci 0000:01:00.0: BAR 2: assigned [mem 0xc0000000-0xc001ffff 64bit] [ 1.141088] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ffff pref] [ 1.148353] pci 0000:01:00.1: BAR 0: assigned [mem 0xc0040000-0xc0043fff 64bit] [ 1.155738] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x10ff] [ 1.161879] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.167139] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] [ 1.173274] pci 0000:00:00.0: bridge window [mem 0xc0000000-0xc00fffff] [ 1.180106] pci 0000:00:00.0: bridge window [mem 0x800000000-0x80fffffff 64bit pref] [ 1.188210] mmc1: new high speed SDHC card at address 1234 [ 1.193873] mmcblk1: mmc1:1234 SA08G 7.41 GiB [ 1.198461] pcieport 0000:00:00.0: AER enabled with IRQ 32 [ 1.204020] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 [ 1.210396] rtc-efi rtc-efi: setting system clock to 2018-08-06 20:01:28 UTC (1533585688) [ 1.211676] mmcblk1: p1 p2 [ 1.220717] v_5v0_usb3_hst_vbus: disabling [ 1.231509] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.239654] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 1.248061] devtmpfs: mounted [ 1.251151] Freeing unused kernel memory: 384K [ 1.325623] random: fast init done INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ 1.488069] NET: Registered protocol family 1 ERROR: could not open /proc/stat: No such file or directory [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 239 [ ok . [....] Synthesizing the initial hotplug events...[ ok done. [ 1.786418] EFI Variables Facility v0.08 2004-May-17 [....] Waiting for /dev to be fully populated...[ 1.804433] mvpp2 f2000000.ethernet eth0: Using random mac address fe:a5:21:f0:f8:7d [ 1.806861] usbcore: registered new interface driver usbfs [ 1.817792] usbcore: registered new interface driver hub [ 1.817835] mvpp2 f4000000.ethernet eth1: Using random mac address 86:5f:16:0c:f9:16 [ 1.823172] usbcore: registered new device driver usb [ 1.837065] mvpp2 f4000000.ethernet eth2: Using random mac address 8e:6e:60:9f:57:60 [ 1.849493] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.851030] mvpp2 f4000000.ethernet eth3: Using random mac address c6:5e:07:9a:54:82 [ 1.859250] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.874656] scsi host0: ahci [ 1.877789] scsi host1: ahci [ 1.880777] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 57 [ 1.888777] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 57 [ 1.897008] ahci f4540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 1.905629] ahci f4540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 1.914173] scsi host2: ahci [ 1.917252] scsi host3: ahci [ 1.920225] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x100 irq 58 [ 1.928198] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] port 0x180 irq 58 [ 1.928608] xhci-hcd f2500000.usb3: xHCI Host Controller [ 1.942154] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1 [ 1.951232] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 1.959840] xhci-hcd f2500000.usb3: irq 59, io mem 0xf2500000 [ 1.966174] hub 1-0:1.0: USB hub found [ 1.970058] hub 1-0:1.0: 1 port detected [ 1.974150] xhci-hcd f2500000.usb3: xHCI Host Controller [ 1.979551] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2 [ 1.979558] xhci-hcd f2500000.usb3: Host supports USB 3.0 SuperSpeed [ 1.993840] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.000947] cryptd: max_cpu_qlen set to 1000 [ 2.002463] hub 2-0:1.0: USB hub found [ 2.010089] hub 2-0:1.0: 1 port detected [ 2.014291] xhci-hcd f2510000.usb3: xHCI Host Controller [ 2.019647] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3 [ 2.027219] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 2.035823] xhci-hcd f2510000.usb3: irq 60, io mem 0xf2510000 [ 2.042445] hub 3-0:1.0: USB hub found [ 2.046236] hub 3-0:1.0: 1 port detected [ 2.050278] xhci-hcd f2510000.usb3: xHCI Host Controller [ 2.055768] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4 [ 2.063314] xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed [ 2.069818] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.078176] hub 4-0:1.0: USB hub found [ 2.081972] hub 4-0:1.0: 1 port detected [ 2.086215] xhci-hcd f4500000.usb3: xHCI Host Controller [ 2.091581] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 5 [ 2.099158] xhci-hcd f4500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010 [ 2.107751] xhci-hcd f4500000.usb3: irq 61, io mem 0xf4500000 [ 2.113788] hub 5-0:1.0: USB hub found [ 2.117586] hub 5-0:1.0: 1 port detected [ 2.121642] xhci-hcd f4500000.usb3: xHCI Host Controller [ 2.126988] xhci-hcd f4500000.usb3: new USB bus registered, assigned bus number 6 [ 2.134514] xhci-hcd f4500000.usb3: Host supports USB 3.0 SuperSpeed [ 2.141009] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.149354] hub 6-0:1.0: USB hub found [ 2.153156] hub 6-0:1.0: 1 port detected [ 2.162109] [drm] radeon kernel modesetting enabled. [ 2.167730] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 2.174555] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1787:0x3000 0x00). [ 2.223834] ata1: SATA link down (SStatus 0 SControl 300) [ 2.250489] ata3: SATA link down (SStatus 0 SControl 300) [ 2.256599] ata4: SATA link down (SStatus 0 SControl 300) [ 2.303985] ATOM BIOS: CEDAR [ 2.306958] [drm] GPU not posted. posting now... [ 2.314564] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.323482] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.331229] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.336194] [drm] RAM width 64bits DDR [ 2.343406] [TTM] Zone kernel: Available graphics memory: 2017038 kiB [ 2.349967] [TTM] Initializing pool allocator [ 2.354353] [TTM] Initializing DMA pool allocator [ 2.359105] [drm] radeon: 1024M of VRAM memory ready [ 2.364109] [drm] radeon: 1024M of GTT memory ready. [ 2.369260] [drm] Loading CEDAR Microcode [ 2.370083] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.380025] ata2.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133 [ 2.386240] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.393559] ata2.00: configured for UDMA/133 [ 2.397952] scsi 1:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC52 PQ: 0 ANSI: 5 [ 2.418024] sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 2.420812] [drm] Internal thermal controller with fan control [ 2.425823] sd 1:0:0:0: [sda] 4096-byte physical blocks [ 2.436947] sd 1:0:0:0: [sda] Write Protect is off [ 2.441160] [drm] radeon: dpm initialized [ 2.445807] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.459901] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.460082] usb 5-1: new high-speed USB device number 2 using xhci-hcd [ 2.466365] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 2.467195] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.511728] NET: Registered protocol family 10 [ 2.516748] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.522778] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready [ 2.528771] Segment Routing with IPv6 [ 2.548836] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000). [ 2.556059] radeon 0000:01:00.0: WB enabled [ 2.560272] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x (ptrval) [ 2.571109] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x (ptrval) [ 2.585425] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x (ptrval) [ 2.596259] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.602916] [drm] Driver supports precise vblank timestamp query. [ 2.609046] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.615006] radeon 0000:01:00.0: radeon: using MSI. [ 2.619944] [drm] radeon: irq initialized. [ 2.635912] hub 5-1:1.0: USB hub found [ 2.639847] hub 5-1:1.0: 4 ports detected [ 2.644731] [drm] ring test on 0 succeeded in 0 usecs [ 2.649815] [drm] ring test on 3 succeeded in 3 usecs [ 2.797941] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.833616] [drm] ring test on 5 succeeded in 1 usecs [ 2.838697] [drm] UVD initialized successfully. [ 2.843495] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.848884] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.905618] hub 6-1:1.0: USB hub found [ 2.909579] hub 6-1:1.0: 4 ports detected [ 2.986738] usb 5-1.4: new high-speed USB device number 3 using xhci-hcd [ 3.006863] [drm] ib test on ring 5 succeeded [ 3.011876] [drm] Radeon Display Connectors [ 3.016085] [drm] Connector 0: [ 3.019154] [drm] DP-1 [ 3.021698] [drm] HPD2 [ 3.024244] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 3.031672] [drm] Encoders: [ 3.034653] [drm] DFP1: INTERNAL_UNIPHY1 [ 3.038941] [drm] Connector 1: [ 3.042008] [drm] DVI-I-1 [ 3.044814] [drm] HPD4 [ 3.047358] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 3.054786] [drm] Encoders: [ 3.057767] [drm] DFP2: INTERNAL_UNIPHY [ 3.061968] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.066605] [drm] Connector 2: [ 3.069672] [drm] DVI-I-2 [ 3.072478] [drm] HPD1 [ 3.075023] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 3.082450] [drm] Encoders: [ 3.085430] [drm] DFP3: INTERNAL_UNIPHY1 [ 3.089719] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 3.095924] hub 5-1.4:1.0: USB hub found [ 3.100002] hub 5-1.4:1.0: 4 ports detected [ 3.110713] mvpp2 f2000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 3.118686] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.206262] [drm] fb mappable at 0x80034D000 [ 3.210554] [drm] vram apper at 0x800000000 [ 3.214756] [drm] size 8294400 [ 3.217823] [drm] fb depth is 24 [ 3.221064] [drm] pitch is 7680 [ 3.264754] Console: switching to colour frame buffer device 240x67 [ 3.278056] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device [ 3.299311] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ ok done. [....] Setting up keyboard layout...[ 3.351975] usb 6-1.4: new SuperSpeed USB device number 3 using xhci-hcd [ ok done. [ 3.458706] hub 6-1.4:1.0: USB hub found [ 3.462996] hub 6-1.4:1.0: 4 ports detected [ 3.540089] usb 5-1.4.1: new full-speed USB device number 4 using xhci-hcd [ 3.551721] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Checking root file system...fsck from util-linux 2.32 /dev/mmcblk0p1: clean, 165507/475136 files, 4946295/7599104 blocks [ ok done. [ 3.603163] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=60 [ 3.723430] usb 5-1.4.1: new high-speed USB device number 5 using xhci-hcd [....] Activating lvm and md swap...[ ok done. [....] Checking file systems...fsck from util-linux 2.32 checking super block... filesystem is clean, no checking needed. [ ok done. [ 3.892330] usbcore: registered new interface driver usbhid [ 3.898466] usbhid: USB HID core driver [....] Cleaning up temporary files... /tmp[ ok . [ 3.971996] usbcore: registered new interface driver snd-usb-audio [ 3.981106] input: ASUS Xonar U7 MKII as /devices/platform/cp1/cp1:config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.4/0003:0B05:183C.0001/input/input0 [ 3.996748] usb 5-1.4.2: new low-speed USB device number 6 using xhci-hcd [info] Loading kernel module nf_conntrack_ftp. [info] Loading kernel module snd-usb-audio. [info] Loading kernel module fbcon. modprobe: FATAL: Module fbcon not found in directory /lib/modules/4.17.11 [info] Loading kernel module udl. modprobe: FATAL: Module udl not found in directory /lib/modules/4.17.11 [ 4.050298] hid-generic 0003:0B05:183C.0001: input: USB HID v1.00 Device [ASUS Xonar U7 MKII] on usb-f4500000.usb3-1.4.1/input4 [ 4.143548] random: alsactl: uninitialized urandom read (4 bytes read) [ 4.159127] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/cp1/cp1:config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.2:1.0/0003:046D:C01E.0002/input/input1 [ 4.175703] hid-generic 0003:046D:C01E.0002: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-f4500000.usb3-1.4.2/input0 [ 4.252844] Adding 4194300k swap on /i/SWAP. Priority:-2 extents:1 across:4194300k [ 4.270569] mvpp2 f4000000.ethernet eth2: Link is Up - 100Mbps/Full - flow control rx/tx [ 4.278738] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 4.316754] usb 5-1.4.3: new low-speed USB device number 7 using xhci-hcd [....] Mounting local filesystems...[ ok done. [....] Activating swapfile swap...[ ok done. [....] Cleaning up temporary files...[ ok . [ 4.366696] random: dd: uninitialized urandom read (512 bytes read) [....] Starting Setting kernel variables: sysctl[ ok . [ 4.468860] PPP generic driver version 2.4.2 [ 4.474859] input: GASIA PS2toUSB Adapter as /devices/platform/cp1/cp1:config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.0/0003:0E8F:0020.0003/input/input2 [ 4.477505] NET: Registered protocol family 17 [ 4.539749] NET: Registered protocol family 24 [ 4.550179] hid-generic 0003:0E8F:0020.0003: input: USB HID v1.10 Keyboard [GASIA PS2toUSB Adapter] on usb-f4500000.usb3-1.4.3/input0 [ 4.566423] input: GASIA PS2toUSB Adapter as /devices/platform/cp1/cp1:config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.1/0003:0E8F:0020.0004/input/input3 [....] Configuring network interfaces...Plugin rp-pppoe.so loaded. ifup: interface eth0 already configured ifup: interface eth2 already configured [ ok done. [....] Cleaning up temporary files...[ ok . [ 4.636900] hid-generic 0003:0E8F:0020.0004: input: USB HID v1.10 Mouse [GASIA PS2toUSB Adapter] on usb-f4500000.usb3-1.4.3/input1 [ 4.660387] random: alsactl: uninitialized urandom read (4 bytes read) [....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ ok . [....] Setting sensors limits...[ ok done. [....] Setting up ALSA...[ ok done. [....] Loading netfilter rules...run-parts: executing /usr/share/netfilter-persistent/plugins.d/15-ip4tables start run-parts: executing /usr/share/netfilter-persistent/plugins.d/25-ip6tables start [ 4.743426] usb 5-1.4.4: new high-speed USB device number 8 using xhci-hcd [ ok done. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Enabling additional executable binary formats: binfmt-support[ ok . [....] Setting up console font and keymap...[ ok done. [ 4.878142] udlfb 5-1.4.4:1.0: vendor descriptor length: 34 data: 22 5f 01 00 20 05 00 01 03 00 04 [ 4.887190] udlfb 5-1.4.4:1.0: DL chip limited to 2360000 pixel modes [....] Starting enhanced syslogd: rsyslogd[ ok . [ 5.046171] usb 5-1.4.4: Unable to get valid EDID from device/display [ 5.055288] usb 5-1.4.4: fb1 is DisplayLink USB device (800x600, 1880K framebuffer memory) [ 5.063655] usbcore: registered new interface driver udlfb [....] Starting system message bus: dbus[ ok . [....] Loading cpufreq kernel modules...[ ok done (none). [....] Starting mouse interface server: gpm[ ok . [....] Starting NTP server: ntpd[ ok . [ 5.167095] urandom_read: 3 callbacks suppressed [ 5.167098] random: automount: uninitialized urandom read (4 bytes read) [ 5.195518] random: isc-worker0000: uninitialized urandom read (10 bytes read) [ 5.202800] random: isc-worker0000: uninitialized urandom read (40 bytes read) [....] Starting automount...[ ok . [....] Starting domain name service...: bind9[ ok . [....] Starting virtual private network daemon:[ ok . [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...[ ok done. Starting very small Busybox based DHCP server: Starting /usr/sbin/udhcpd... udhcpd. Starting radvd: radvd. [....] Starting periodic command scheduler: cron[ ok . [....] Starting OpenBSD Secure Shell server: sshd[ ok . [....] Starting WIDE DHCPv6 client: dhcp6c[ ok . Debian GNU/Linux buster/sid leontynka ttyS0 leontynka login: [ 10.373259] random: crng init done [ 10.376676] random: 1 urandom warning(s) missed due to ratelimiting [ 23.931568] tun: Universal TUN/TAP device driver, 1.6