Received: by 2002:ac0:a5a7:0:0:0:0:0 with SMTP id m36-v6csp5058742imm; Tue, 7 Aug 2018 11:55:21 -0700 (PDT) X-Google-Smtp-Source: AAOMgpeBlBZ5RciKL8DkBN7rQP51Gb+Q62NRelaFTgdJwBYimhqQiCvUgjR7eNkizr1IqiULsBIP X-Received: by 2002:a62:2ac8:: with SMTP id q191-v6mr23081734pfq.139.1533668121067; Tue, 07 Aug 2018 11:55:21 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1533668121; cv=none; d=google.com; s=arc-20160816; b=b6P1xJc5kUIAu3QLYNkuftf06ajI0+c1S7B5X/RG2VXyV90qMkb0wQ+lGyy1W7oOzG Gf72SJ4PUnCj0aLG0EHMLFstiOQesn9CZNA66jTv1U7gs6m0J3MJLMiUqGbkKgrjfHXb cLUOmlCdgko36rjPuBAQDkMUb5ZawEo+j+abrRn2JFfnAD/T5dEcjh6gzYNoSH53NG3h s3k5hc4xAJwDfLLo4Hld9FYsdylYwz3/pp8umaiTxgyU3z2x40afd7PFlwMVkxYEKHnK JmAMX5Q6btlOjfZTN/Gt+9pSS8vR8KOWny453uZq9idN7GAwtvfppndOVkTF4T8tu4Cm q72w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:content-transfer-encoding:cc:to:subject :message-id:date:from:references:in-reply-to:mime-version :dkim-signature:arc-authentication-results; bh=A671t/zTXuHii/lgVF4+XN8+qUoSIf1lgStk/1AZvUs=; b=Ec6s+B3ixPaZz2QG9oG6PN9cVXfbEShsSDd/ugZPwz2TmZ596RHxpuajmCSxVlHFm+ yE95aNL+DEFpUs578NNgrR/cZI3LtFiymoyFkMd7EwNh/Sbx4aVHcexM+9SdDSlDqxV9 1WjVfOSmDEtjxuLkxnju0BgVOAWAFUMRj+QPT21r6MIMtjOYkqB2x9zw+39yYx+JEwwn tAHZ5Ciuw00Mdc4WSEIthvxzEX5XM8cpToAuL+buaNfjn5g9e1R96Le+DqohohCwxQcm q7VnwdkGKfKSq5h9wtR7RhXnEDwa5u831YlCMjQAw67SwUH8EWS1TrnJD3LDjSqVzP9W 58kA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=SK5LluN2; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id c22-v6si1622256plo.271.2018.08.07.11.55.06; Tue, 07 Aug 2018 11:55:21 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=SK5LluN2; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2390374AbeHGUWv (ORCPT + 99 others); Tue, 7 Aug 2018 16:22:51 -0400 Received: from mail-io0-f173.google.com ([209.85.223.173]:37090 "EHLO mail-io0-f173.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2390003AbeHGUWv (ORCPT ); Tue, 7 Aug 2018 16:22:51 -0400 Received: by mail-io0-f173.google.com with SMTP id z19-v6so14780592ioh.4 for ; Tue, 07 Aug 2018 11:07:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc:content-transfer-encoding; bh=A671t/zTXuHii/lgVF4+XN8+qUoSIf1lgStk/1AZvUs=; b=SK5LluN2oFKoVaKfu9AKckzq0xvXtQkt63Pd+Hch16Ji+bN7Rdot3XIiS4uWW25fnB FnOQjyKYNMx+9kJZnzV2nXc0kkMccmqMfa/p2w77vGA0ZXr3fo1fD2ONZ/r0hz5iOHwq aZUyd+LUF8sUeG3R3FCXxd1QYGLUdAGV01lao= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to:cc:content-transfer-encoding; bh=A671t/zTXuHii/lgVF4+XN8+qUoSIf1lgStk/1AZvUs=; b=RC/P6rA/YNwJhr5u4YqH63D2nBHDSTyEdxFPj2Y3MgYIr5SXEeldwQ1UW4ejku5JCi EDzDfptu+6UiTX/kuZlXwbJSCrPGT/WWwkEwhV6+eTy8QAWvFz4ueJmORW7fN27gwGD6 D8Vcd1ZEXUkISnOnSGR7XKnFGDe3mS8K4KMpm5flEaQDThZKv5GozJZ9/vtCSkdQXhFv UoqouGXEzGam071MQZfCcdwlCeaF1rWoeJ6cC0wz4m7kUCQM5v23Y844YAAr54Twa0VB UCPj7gXbrpZiYU84Igmd92KA2eNJU6Ask+A7h1a+ZKoxJtCArSrfhcKFHj2JZA9CSGT/ 7p2w== X-Gm-Message-State: AOUpUlFy1anWYR98I35DnR7dfIUOKNG3vsV8vOXY1VxASxrxiz479Kcc AHjQT14U4Y5OzcjKqeD6e0v6wj2cdKTa2XsATPpzeA== X-Received: by 2002:a6b:5208:: with SMTP id g8-v6mr20459604iob.60.1533665238072; Tue, 07 Aug 2018 11:07:18 -0700 (PDT) MIME-Version: 1.0 Received: by 2002:a6b:ac05:0:0:0:0:0 with HTTP; Tue, 7 Aug 2018 11:07:17 -0700 (PDT) In-Reply-To: References: <99fff4fe-afa9-f12f-a518-472a9dd1c530@arm.com> From: Ard Biesheuvel Date: Tue, 7 Aug 2018 20:07:17 +0200 Message-ID: Subject: Re: framebuffer corruption due to overlapping stp instructions on arm64 To: Mikulas Patocka Cc: Marcin Wojtas , Thomas Petazzoni , Joao Pinto , Catalin Marinas , linux-pci , Will Deacon , Russell King - ARM Linux , Linux Kernel Mailing List , Matt Sealey , Jingoo Han , Robin Murphy , linux-arm-kernel Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 7 August 2018 at 19:39, Mikulas Patocka wrote: > > > On Tue, 7 Aug 2018, Marcin Wojtas wrote: > >> Ard, Mikulas, >> >> After some self-caused setup issues I was able to run the test on my >> MacchiatoBin with the kernel v4.18-rc8. It's been running for 1h+ now, >> loading the CPU to 100% and no single error event... >> >> I built the binary file with: >> gcc-linaro-7.2.1-2017.11-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-= gcc -O2 >> >> Maybe it's the older firmware issue? > > I have downloaded and built the firmware recently (it has timestamp Jul 3= 0 > 2018). > > Do you still have your firmware file "flash-image.bin" that you used, so > that I could try it? > >> Please send the full bootlog with >> the very first line after reset. My board rev is v1.3 and I use >> mainline UEFI (newest edk2 + edk2-platforms) + newest publicly >> available ARM-TF and earliest firmware for this board. >> >> Best regards, >> Marcin > Mikulas, Is the issue reproducible with an nvidia card + nouveau driver as well ? Given the screen corruption i see with radeon even on other arm systems, i'd like to ensure that this is a platform bug not a driver bug. > This is my bootlog: > > BootROM - 2.03 > Starting CP-0 IOROM 1.07 > Booting from SD 0 (0x29) > Found valid image at boot postion 0x002 > lNOTICE: Starting binary extension > NOTICE: SVC: SW Revision 0x0. SVC is not supported > mv_ddr: mv_ddr-devel-18.05.0-g84dd1d9 (Jul 30 2018 - 04:58:51 PM) > mv_ddr: completed successfully > NOTICE: Cold boot > NOTICE: Booting Trusted Firmware > NOTICE: BL1: v1.4(release):armada-18.05.2:80bbf686 > NOTICE: BL1: Built : 17:00:18, Jul 30 2018 > NOTICE: BL1: Booting BL2 > lNOTICE: BL2: v1.4(release):armada-18.05.2:80bbf686 > NOTICE: BL2: Built : 17:00:21, Jul 30 2018 > BL2: Initiating SCP_BL2 transfer to SCP > NOTICE: SCP_BL2 contains 2 concatenated images > NOTICE: Load image to CP1 MSS AP0 > NOTICE: Loading MSS image from address 0x4023020 Size 0x135c to MSS at 0= xf4280000 > NOTICE: Done > NOTICE: Load image to AP0 MSS > NOTICE: Loading MSS image from address 0x402437c Size 0x1f6c to MSS at 0= xf0580000 > N > > FreeRTOS 7.3.0 - Marvell cm3 - A8K release armada-18.05.1 > > OTICE: Done > NOTICE: SCP Image doesn't contain PM firmware > NOTICE: BL1: Booting BL31 > lNOTICE: MSS PM is not supported in this build > NOTICE: BL31: v1.4(release):armada-18.05.2:80bbf686 > NOTICE: BL31: Built : 17:00:21, Jul 30 2018 > lUEFI firmware (version MARVELL_EFI built at 16:50:27 on Jul 30 2018) > > Armada 8040 MachiatoBin Platform Init > > Comphy0-0: PCIE0 5 Gbps > Comphy0-1: PCIE0 5 Gbps > Comphy0-2: PCIE0 5 Gbps > Comphy0-3: PCIE0 5 Gbps > Comphy0-4: SFI 10.31 Gbps > Comphy0-5: SATA1 5 Gbps > > Comphy1-0: SGMII1 1.25 Gbps > Comphy1-1: SATA2 5 Gbps > Comphy1-2: USB3_HOST0 5 Gbps > Comphy1-3: SATA3 5 Gbps > Comphy1-4: SFI 10.31 Gbps > Comphy1-5: SGMII2 3.125 Gbps > > UTMI PHY 0 initialized to USB Host0 > UTMI PHY 1 initialized to USB Host1 > UTMI PHY 2 initialized to USB Host0 > Succesfully installed protocol interfaces > Error: Image at 000BF6F8000 start failed: 00000001 > remove-symbol-file /usr/src/git/macchiato/edk2/Build/Armada80x0McBin-AARC= H64/RELEASE_GCC5/AARCH64/MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPl= atformDxe/DEBUG/AcpiPlatform.dll 0xBF6F9000 > Detected w25q32bv SPI flash with page size 256 B, erase size 4 KB, total = 4 MB > ramdisk:blckio install. Status=3DSuccess > Connect: PcieRoot(0x0)/Pci(0x0,0x0): Not Found > 3h3h3hTianocore/EDK2 firmware version MARVELL_EFI > Press ESCAPE for boot options ...error: no suitable video mode found. > error: no video mode activated. > GNU GRUB version 2.02~beta3-5 > > /------------------------------------------------------------------------= ----\||||||||||||||||||||||||||\-------------------------------------------= ---------------------------------/ Use the ^ and v keys to select which= entry is highlighted. > Press enter to boot the selected OS, `e' to edit the commands > before booting or `c' for a command-line. > *Debian GNU/Linux = Advanced options for Debian GNU/Linux = System setup > The highlighted entry will be executed automatically in 5s. = The highlighted entry will be executed automatically in 4s. = = = Loading Linux 4.17.11 ... > EFI stub: Booting Linux Kernel... > EFI stub: Using DTB from configuration table > EFI stub: Exiting boot services and installing virtual address map... > [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081] > [ 0.000000] Linux version 4.17.11 (root@leontynka) (gcc version 8.2.0 = (Debian 8.2.0-2)) #10 SMP PREEMPT Fri Aug 3 18:29:35 CEST 2018 > [ 0.000000] Machine model: Marvell 8040 MACCHIATOBin > [ 0.000000] efi: Getting EFI parameters from FDT: > [ 0.000000] efi: EFI v2.70 by EDK II > [ 0.000000] efi: SMBIOS 3.0=3D0xbfed0000 ACPI 2.0=3D0xb6760000 MEMA= TTR=3D0xb8c63518 RNG=3D0xbffdcf98 > [ 0.000000] efi: seeding entropy pool > [ 0.000000] psci: probing for conduit method from DT. > [ 0.000000] psci: PSCIv1.0 detected in firmware. > [ 0.000000] psci: Using standard PSCI v0.2 function IDs > [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. > [ 0.000000] psci: SMC Calling Convention v1.1 > [ 0.000000] percpu: Embedded 26 pages/cpu @ (ptrval) s67096 r81= 92 d31208 u106496 > [ 0.000000] Detected PIPT I-cache on CPU0 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 103= 1688 > [ 0.000000] Kernel command line: BOOT_IMAGE=3D/boot/vmlinuz-4.17.11 ro= ot=3D/dev/mmcblk0p1 ro console=3DttyS0,115200 > [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 419430= 4 bytes) > [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 = bytes) > [ 0.000000] software IO TLB [mem 0xbb810000-0xbf810000] (64MB) mapped = at [ (ptrval)- (ptrval)] > [ 0.000000] Memory: 4033692K/4192256K available (4860K kernel code, 37= 6K rwdata, 2452K rodata, 384K init, 2178K bss, 158564K reserved, 0K cma-res= erved) > [ 0.000000] SLUB: HWalign=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D4,= Nodes=3D1 > [ 0.000000] Preemptible hierarchical RCU implementation. > [ 0.000000] Tasks RCU enabled. > [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 > [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000 > [ 0.000000] GIC: Using split EOI/Deactivate mode > [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32) > [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191] > [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32) > [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223] > [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32) > [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255] > [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32) > [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287] > [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). > [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_= cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns > [ 0.000002] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps ever= y 4398046511100ns > [ 0.000113] Console: colour dummy device 174x49 > [ 0.000124] Calibrating delay loop (skipped), value calculated using t= imer frequency.. 50.08 BogoMIPS (lpj=3D83333) > [ 0.000129] pid_max: default: 32768 minimum: 301 > [ 0.000151] Security Framework initialized > [ 0.000154] Yama: becoming mindful. > [ 0.000183] Mount-cache hash table entries: 8192 (order: 4, 65536 byte= s) > [ 0.000199] Mountpoint-cache hash table entries: 8192 (order: 4, 65536= bytes) > [ 0.016676] ASID allocator initialised with 65536 entries > [ 0.020006] Hierarchical SRCU implementation. > [ 0.023435] Remapping and enabling EFI services. > [ 0.026680] smp: Bringing up secondary CPUs ... > [ 0.043500] Detected PIPT I-cache on CPU1 > [ 0.043522] CPU1: Booted secondary processor 0x0000000001 [0x410fd081] > [ 0.060176] Detected PIPT I-cache on CPU2 > [ 0.060195] CPU2: Booted secondary processor 0x0000000100 [0x410fd081] > [ 0.076859] Detected PIPT I-cache on CPU3 > [ 0.076872] CPU3: Booted secondary processor 0x0000000101 [0x410fd081] > [ 0.076901] smp: Brought up 1 node, 4 CPUs > [ 0.076910] SMP: Total of 4 processors activated. > [ 0.076913] CPU features: detected: 32-bit EL0 Support > [ 0.077194] CPU: All CPU(s) started at EL2 > [ 0.077205] alternatives: patching kernel code > [ 0.077230] random: get_random_u64 called from compute_layout+0x94/0xe= 8 with crng_init=3D0 > [ 0.077599] devtmpfs: initialized > [ 0.078967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xfffff= fff, max_idle_ns: 6370867519511994 ns > [ 0.078975] futex hash table entries: 1024 (order: 5, 131072 bytes) > [ 0.079032] pinctrl core: initialized pinctrl subsystem > [ 0.079183] SMBIOS 3.0.0 present. > [ 0.079191] DMI: Marvell Armada 8040 MacchiatoBin/Armada 8040 Macchiat= oBin, BIOS EDK II Jul 30 2018 > [ 0.079264] NET: Registered protocol family 16 > [ 0.079484] cpuidle: using governor ladder > [ 0.079535] cpuidle: using governor menu > [ 0.079559] vdso: 2 pages (1 code @ (ptrval), 1 data @ = (ptrval)) > [ 0.079562] vdso: 2 pages (1 code @ (ptrval), 1 data @ = (ptrval)) > [ 0.079569] hw-breakpoint: found 6 breakpoint and 4 watchpoint registe= rs. > [ 0.079681] DMA: preallocated 256 KiB pool for atomic allocations > [ 0.082434] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pag= es > [ 0.082669] ACPI: Interpreter disabled. > [ 0.082822] reg-fixed-voltage regulator-usb3-vbus0: could not find pct= ldev for node /cp0/config-space@f2000000/system-controller@440000/pinctrl/x= hci0-vbus-pins, deferring probe > [ 0.082929] SCSI subsystem initialized > [ 0.083033] Registered efivars operations > [ 0.083398] clocksource: Switched to clocksource arch_sys_counter > [ 0.083517] pnp: PnP ACPI: disabled > [ 0.085008] NET: Registered protocol family 2 > [ 0.085146] tcp_listen_portaddr_hash hash table entries: 2048 (order: = 3, 32768 bytes) > [ 0.085156] TCP established hash table entries: 32768 (order: 6, 26214= 4 bytes) > [ 0.085213] TCP bind hash table entries: 32768 (order: 7, 524288 bytes= ) > [ 0.085441] TCP: Hash tables configured (established 32768 bind 32768) > [ 0.085492] UDP hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.085507] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) > [ 0.085713] hw perfevents: unable to count PMU IRQs > [ 0.085718] hw perfevents: /ap806/config-space@f0000000/pmu: failed to= register PMU devices! > [ 0.085823] kvm [1]: 8-bit VMID > [ 0.086279] kvm [1]: vgic interrupt IRQ1 > [ 0.086339] kvm [1]: Hyp mode initialized successfully > [ 0.086649] workingset: timestamp_bits=3D62 max_order=3D20 bucket_orde= r=3D0 > [ 0.088566] io scheduler noop registered > [ 0.088625] io scheduler cfq registered (default) > [ 0.089467] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: r= egistered pinctrl driver > [ 0.089690] armada-cp110-pinctrl f2440000.system-controller:pinctrl: r= egistered pinctrl driver > [ 0.089843] armada-cp110-pinctrl f4440000.system-controller:pinctrl: r= egistered pinctrl driver > [ 0.091439] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver > [ 0.091583] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver > [ 0.091736] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver > [ 0.091897] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver > [ 0.092084] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver > [ 0.092247] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver > [ 0.092432] mv_xor_v2 f46a0000.xor: Marvell Version 2 XOR driver > [ 0.092596] mv_xor_v2 f46c0000.xor: Marvell Version 2 XOR driver > [ 0.092685] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled > [ 0.092996] console [ttyS0] disabled > [ 0.113364] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq =3D 7, base= _baud =3D 12500000) is a 16550A > [ 0.777029] console [ttyS0] enabled > [ 0.801032] f2702100.serial: ttyS1 at MMIO 0xf2702100 (irq =3D 26, bas= e_baud =3D 15625000) is a 16550A > [ 0.830524] f4702000.serial: ttyS2 at MMIO 0xf4702000 (irq =3D 27, bas= e_baud =3D 15625000) is a 16550A > [ 0.839705] cacheinfo: Unable to detect cache hierarchy for CPU 0 > [ 0.846129] libphy: Fixed MDIO Bus: probed > [ 0.850384] libphy: orion_mdio_bus: probed > [ 0.854879] libphy: orion_mdio_bus: probed > [ 0.862575] mousedev: PS/2 mouse device common for all mice > [ 0.868314] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0 > [ 0.874446] i2c /dev entries driver > [ 0.880187] sdhci: Secure Digital Host Controller Interface driver > [ 0.886399] sdhci: Copyright(c) Pierre Ossman > [ 0.890777] sdhci-pltfm: SDHCI platform and OF driver helper > [ 0.896640] mmc0: Switching to 3.3V signalling voltage failed > [ 0.927528] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] = using ADMA 64-bit > [ 0.966330] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] = using ADMA 64-bit > [ 0.976142] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7= counters available > [ 0.984470] PCI: OF: host bridge /cp0/pcie@f2600000 ranges: > [ 0.990120] PCI: OF: IO 0xeff00000..0xeff0ffff -> 0x00000000 > [ 0.996083] PCI: OF: MEM 0xc0000000..0xdfffffff -> 0xc0000000 > [ 1.002050] PCI: OF: MEM 0x800000000..0x8ffffffff -> 0x800000000 > [ 1.008301] mmc0: new high speed MMC card at address 0001 > [ 1.008337] armada8k-pcie f2600000.pcie: link up > [ 1.013884] mmcblk0: mmc0:0001 8GME4R 7.28 GiB > [ 1.018427] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:0= 0 > [ 1.023036] mmcblk0boot0: mmc0:0001 8GME4R partition 1 4.00 MiB > [ 1.029619] pci_bus 0000:00: root bus resource [bus 00-ff] > [ 1.035652] mmcblk0boot1: mmc0:0001 8GME4R partition 2 4.00 MiB > [ 1.041101] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] > [ 1.047085] mmcblk0rpmb: mmc0:0001 8GME4R partition 3 512 KiB, chardev= (250:0) > [ 1.053256] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdffff= fff] > [ 1.067452] pci_bus 0000:00: root bus resource [mem 0x800000000-0x8fff= fffff] > [ 1.074559] mmcblk0: p1 p2 p3 > [ 1.077642] pci 0000:00:00.0: disabling Extended Tags (this device can= 't handle them) > [ 1.097253] pci 0000:00:00.0: BAR 9: assigned [mem 0x800000000-0x80fff= ffff 64bit pref] > [ 1.105218] pci 0000:00:00.0: BAR 0: assigned [mem 0x810000000-0x8100f= ffff 64bit] > [ 1.112749] pci 0000:00:00.0: BAR 8: assigned [mem 0xc0000000-0xc00fff= ff] > [ 1.119578] pci 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff] > [ 1.125712] pci 0000:01:00.0: BAR 0: assigned [mem 0x800000000-0x80fff= ffff 64bit pref] > [ 1.133705] pci 0000:01:00.0: BAR 2: assigned [mem 0xc0000000-0xc001ff= ff 64bit] > [ 1.141088] pci 0000:01:00.0: BAR 6: assigned [mem 0xc0020000-0xc003ff= ff pref] > [ 1.148353] pci 0000:01:00.1: BAR 0: assigned [mem 0xc0040000-0xc0043f= ff 64bit] > [ 1.155738] pci 0000:01:00.0: BAR 4: assigned [io 0x1000-0x10ff] > [ 1.161879] pci 0000:00:00.0: PCI bridge to [bus 01-ff] > [ 1.167139] pci 0000:00:00.0: bridge window [io 0x1000-0x1fff] > [ 1.173274] pci 0000:00:00.0: bridge window [mem 0xc0000000-0xc00fff= ff] > [ 1.180106] pci 0000:00:00.0: bridge window [mem 0x800000000-0x80fff= ffff 64bit pref] > [ 1.188210] mmc1: new high speed SDHC card at address 1234 > [ 1.193873] mmcblk1: mmc1:1234 SA08G 7.41 GiB > [ 1.198461] pcieport 0000:00:00.0: AER enabled with IRQ 32 > [ 1.204020] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0 > [ 1.210396] rtc-efi rtc-efi: setting system clock to 2018-08-06 20:01:= 28 UTC (1533585688) > [ 1.211676] mmcblk1: p1 p2 > [ 1.220717] v_5v0_usb3_hst_vbus: disabling > [ 1.231509] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data = mode. Opts: (null) > [ 1.239654] VFS: Mounted root (ext4 filesystem) readonly on device 179= :1. > [ 1.248061] devtmpfs: mounted > [ 1.251151] Freeing unused kernel memory: 384K > [ 1.325623] random: fast init done > INIT: version 2.88 booting > [info] Using makefile-style concurrent boot in runlevel S. > [ 1.488069] NET: Registered protocol family 1 > ERROR: could not open /proc/stat: No such file or directory > [....] Starting the hotplug events dispatcher: systemd-udevdstarting vers= ion 239 > [ ok . > [....] Synthesizing the initial hotplug events...[ ok done. > [ 1.786418] EFI Variables Facility v0.08 2004-May-17 > [....] Waiting for /dev to be fully populated...[ 1.804433] mvpp2 f200= 0000.ethernet eth0: Using random mac address fe:a5:21:f0:f8:7d > [ 1.806861] usbcore: registered new interface driver usbfs > [ 1.817792] usbcore: registered new interface driver hub > [ 1.817835] mvpp2 f4000000.ethernet eth1: Using random mac address 86:= 5f:16:0c:f9:16 > [ 1.823172] usbcore: registered new device driver usb > [ 1.837065] mvpp2 f4000000.ethernet eth2: Using random mac address 8e:= 6e:60:9f:57:60 > [ 1.849493] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps= 0x3 impl platform mode > [ 1.851030] mvpp2 f4000000.ethernet eth3: Using random mac address c6:= 5e:07:9a:54:82 > [ 1.859250] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs= pio slum part sxs > [ 1.874656] scsi host0: ahci > [ 1.877789] scsi host1: ahci > [ 1.880777] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] p= ort 0x100 irq 57 > [ 1.888777] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] p= ort 0x180 irq 57 > [ 1.897008] ahci f4540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps= 0x3 impl platform mode > [ 1.905629] ahci f4540000.sata: flags: 64bit ncq sntf led only pmp fbs= pio slum part sxs > [ 1.914173] scsi host2: ahci > [ 1.917252] scsi host3: ahci > [ 1.920225] ata3: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] p= ort 0x100 irq 58 > [ 1.928198] ata4: SATA max UDMA/133 mmio [mem 0xf4540000-0xf456ffff] p= ort 0x180 irq 58 > [ 1.928608] xhci-hcd f2500000.usb3: xHCI Host Controller > [ 1.942154] xhci-hcd f2500000.usb3: new USB bus registered, assigned b= us number 1 > [ 1.951232] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version = 0x100 quirks 0x00010010 > [ 1.959840] xhci-hcd f2500000.usb3: irq 59, io mem 0xf2500000 > [ 1.966174] hub 1-0:1.0: USB hub found > [ 1.970058] hub 1-0:1.0: 1 port detected > [ 1.974150] xhci-hcd f2500000.usb3: xHCI Host Controller > [ 1.979551] xhci-hcd f2500000.usb3: new USB bus registered, assigned b= us number 2 > [ 1.979558] xhci-hcd f2500000.usb3: Host supports USB 3.0 SuperSpeed > [ 1.993840] usb usb2: We don't know the algorithms for LPM for this ho= st, disabling LPM. > [ 2.000947] cryptd: max_cpu_qlen set to 1000 > [ 2.002463] hub 2-0:1.0: USB hub found > [ 2.010089] hub 2-0:1.0: 1 port detected > [ 2.014291] xhci-hcd f2510000.usb3: xHCI Host Controller > [ 2.019647] xhci-hcd f2510000.usb3: new USB bus registered, assigned b= us number 3 > [ 2.027219] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version = 0x100 quirks 0x00010010 > [ 2.035823] xhci-hcd f2510000.usb3: irq 60, io mem 0xf2510000 > [ 2.042445] hub 3-0:1.0: USB hub found > [ 2.046236] hub 3-0:1.0: 1 port detected > [ 2.050278] xhci-hcd f2510000.usb3: xHCI Host Controller > [ 2.055768] xhci-hcd f2510000.usb3: new USB bus registered, assigned b= us number 4 > [ 2.063314] xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed > [ 2.069818] usb usb4: We don't know the algorithms for LPM for this ho= st, disabling LPM. > [ 2.078176] hub 4-0:1.0: USB hub found > [ 2.081972] hub 4-0:1.0: 1 port detected > [ 2.086215] xhci-hcd f4500000.usb3: xHCI Host Controller > [ 2.091581] xhci-hcd f4500000.usb3: new USB bus registered, assigned b= us number 5 > [ 2.099158] xhci-hcd f4500000.usb3: hcc params 0x0a000990 hci version = 0x100 quirks 0x00010010 > [ 2.107751] xhci-hcd f4500000.usb3: irq 61, io mem 0xf4500000 > [ 2.113788] hub 5-0:1.0: USB hub found > [ 2.117586] hub 5-0:1.0: 1 port detected > [ 2.121642] xhci-hcd f4500000.usb3: xHCI Host Controller > [ 2.126988] xhci-hcd f4500000.usb3: new USB bus registered, assigned b= us number 6 > [ 2.134514] xhci-hcd f4500000.usb3: Host supports USB 3.0 SuperSpeed > [ 2.141009] usb usb6: We don't know the algorithms for LPM for this ho= st, disabling LPM. > [ 2.149354] hub 6-0:1.0: USB hub found > [ 2.153156] hub 6-0:1.0: 1 port detected > [ 2.162109] [drm] radeon kernel modesetting enabled. > [ 2.167730] radeon 0000:01:00.0: enabling device (0000 -> 0003) > [ 2.174555] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9= 0x1787:0x3000 0x00). > [ 2.223834] ata1: SATA link down (SStatus 0 SControl 300) > [ 2.250489] ata3: SATA link down (SStatus 0 SControl 300) > [ 2.256599] ata4: SATA link down (SStatus 0 SControl 300) > [ 2.303985] ATOM BIOS: CEDAR > [ 2.306958] [drm] GPU not posted. posting now... > [ 2.314564] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x00= 0000003FFFFFFF (1024M used) > [ 2.323482] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000= 000007FFFFFFF > [ 2.331229] [drm] Detected VRAM RAM=3D1024M, BAR=3D256M > [ 2.336194] [drm] RAM width 64bits DDR > [ 2.343406] [TTM] Zone kernel: Available graphics memory: 2017038 kiB > [ 2.349967] [TTM] Initializing pool allocator > [ 2.354353] [TTM] Initializing DMA pool allocator > [ 2.359105] [drm] radeon: 1024M of VRAM memory ready > [ 2.364109] [drm] radeon: 1024M of GTT memory ready. > [ 2.369260] [drm] Loading CEDAR Microcode > [ 2.370083] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 2.380025] ata2.00: ATA-8: ST4000DM000-1F2168, CC52, max UDMA/133 > [ 2.386240] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/= 32) > [ 2.393559] ata2.00: configured for UDMA/133 > [ 2.397952] scsi 1:0:0:0: Direct-Access ATA ST4000DM000-1F21 = CC52 PQ: 0 ANSI: 5 > [ 2.418024] sd 1:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.0= 0 TB/3.64 TiB) > [ 2.420812] [drm] Internal thermal controller with fan control > [ 2.425823] sd 1:0:0:0: [sda] 4096-byte physical blocks > [ 2.436947] sd 1:0:0:0: [sda] Write Protect is off > [ 2.441160] [drm] radeon: dpm initialized > [ 2.445807] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enable= d, doesn't support DPO or FUA > [ 2.459901] [drm] GART: num cpu pages 262144, num gpu pages 262144 > [ 2.460082] usb 5-1: new high-speed USB device number 2 using xhci-hcd > [ 2.466365] sd 1:0:0:0: [sda] Attached SCSI removable disk > [ 2.467195] [drm] enabling PCIE gen 2 link speeds, disable with radeon= .pcie_gen2=3D0 > [ 2.511728] NET: Registered protocol family 10 > [ 2.516748] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 2.522778] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready > [ 2.528771] Segment Routing with IPv6 > [ 2.548836] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C= 000). > [ 2.556059] radeon 0000:01:00.0: WB enabled > [ 2.560272] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0= x0000000040000c00 and cpu addr 0x (ptrval) > [ 2.571109] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0= x0000000040000c0c and cpu addr 0x (ptrval) > [ 2.585425] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0= x000000000005c418 and cpu addr 0x (ptrval) > [ 2.596259] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013)= . > [ 2.602916] [drm] Driver supports precise vblank timestamp query. > [ 2.609046] radeon 0000:01:00.0: radeon: MSI limited to 32-bit > [ 2.615006] radeon 0000:01:00.0: radeon: using MSI. > [ 2.619944] [drm] radeon: irq initialized. > [ 2.635912] hub 5-1:1.0: USB hub found > [ 2.639847] hub 5-1:1.0: 4 ports detected > [ 2.644731] [drm] ring test on 0 succeeded in 0 usecs > [ 2.649815] [drm] ring test on 3 succeeded in 3 usecs > [ 2.797941] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd > [ 2.833616] [drm] ring test on 5 succeeded in 1 usecs > [ 2.838697] [drm] UVD initialized successfully. > [ 2.843495] [drm] ib test on ring 0 succeeded in 0 usecs > [ 2.848884] [drm] ib test on ring 3 succeeded in 0 usecs > [ 2.905618] hub 6-1:1.0: USB hub found > [ 2.909579] hub 6-1:1.0: 4 ports detected > [ 2.986738] usb 5-1.4: new high-speed USB device number 3 using xhci-h= cd > [ 3.006863] [drm] ib test on ring 5 succeeded > [ 3.011876] [drm] Radeon Display Connectors > [ 3.016085] [drm] Connector 0: > [ 3.019154] [drm] DP-1 > [ 3.021698] [drm] HPD2 > [ 3.024244] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x6= 46c 0x646c > [ 3.031672] [drm] Encoders: > [ 3.034653] [drm] DFP1: INTERNAL_UNIPHY1 > [ 3.038941] [drm] Connector 1: > [ 3.042008] [drm] DVI-I-1 > [ 3.044814] [drm] HPD4 > [ 3.047358] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x6= 44c 0x644c > [ 3.054786] [drm] Encoders: > [ 3.057767] [drm] DFP2: INTERNAL_UNIPHY > [ 3.061968] [drm] CRT1: INTERNAL_KLDSCP_DAC1 > [ 3.066605] [drm] Connector 2: > [ 3.069672] [drm] DVI-I-2 > [ 3.072478] [drm] HPD1 > [ 3.075023] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x6= 43c 0x643c > [ 3.082450] [drm] Encoders: > [ 3.085430] [drm] DFP3: INTERNAL_UNIPHY1 > [ 3.089719] [drm] CRT2: INTERNAL_KLDSCP_DAC2 > [ 3.095924] hub 5-1.4:1.0: USB hub found > [ 3.100002] hub 5-1.4:1.0: 4 ports detected > [ 3.110713] mvpp2 f2000000.ethernet eth0: Link is Up - 1Gbps/Full - fl= ow control rx/tx > [ 3.118686] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 3.206262] [drm] fb mappable at 0x80034D000 > [ 3.210554] [drm] vram apper at 0x800000000 > [ 3.214756] [drm] size 8294400 > [ 3.217823] [drm] fb depth is 24 > [ 3.221064] [drm] pitch is 7680 > [ 3.264754] Console: switching to colour frame buffer device 240x67 > [ 3.278056] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device > [ 3.299311] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 = on minor 0 > [ ok done. > [....] Setting up keyboard layout...[ 3.351975] usb 6-1.4: new SuperSp= eed USB device number 3 using xhci-hcd > [ ok done. > [ 3.458706] hub 6-1.4:1.0: USB hub found > [ 3.462996] hub 6-1.4:1.0: 4 ports detected > [ 3.540089] usb 5-1.4.1: new full-speed USB device number 4 using xhci= -hcd > [ 3.551721] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) > [....] Checking root file system...fsck from util-linux 2.32 > /dev/mmcblk0p1: clean, 165507/475136 files, 4946295/7599104 blocks > [ ok done. > [ 3.603163] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=3D60 > [ 3.723430] usb 5-1.4.1: new high-speed USB device number 5 using xhci= -hcd > [....] Activating lvm and md swap...[ ok done. > [....] Checking file systems...fsck from util-linux 2.32 > checking super block... > filesystem is clean, no checking needed. > [ ok done. > [ 3.892330] usbcore: registered new interface driver usbhid > [ 3.898466] usbhid: USB HID core driver > [....] Cleaning up temporary files... /tmp[ ok . > [ 3.971996] usbcore: registered new interface driver snd-usb-audio > [ 3.981106] input: ASUS Xonar U7 MKII as /devices/platform/cp1/cp1:con= fig-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.1/5-1.4.1:1.4/0003:0B= 05:183C.0001/input/input0 > [ 3.996748] usb 5-1.4.2: new low-speed USB device number 6 using xhci-= hcd > [info] Loading kernel module nf_conntrack_ftp. > [info] Loading kernel module snd-usb-audio. > [info] Loading kernel module fbcon. > modprobe: FATAL: Module fbcon not found in directory /lib/modules/4.17.11 > [info] Loading kernel module udl. > modprobe: FATAL: Module udl not found in directory /lib/modules/4.17.11 > [ 4.050298] hid-generic 0003:0B05:183C.0001: input: USB HID v1.00 Devi= ce [ASUS Xonar U7 MKII] on usb-f4500000.usb3-1.4.1/input4 > [ 4.143548] random: alsactl: uninitialized urandom read (4 bytes read) > [ 4.159127] input: Logitech USB-PS/2 Optical Mouse as /devices/platfor= m/cp1/cp1:config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.2/5-1.4.= 2:1.0/0003:046D:C01E.0002/input/input1 > [ 4.175703] hid-generic 0003:046D:C01E.0002: input: USB HID v1.10 Mous= e [Logitech USB-PS/2 Optical Mouse] on usb-f4500000.usb3-1.4.2/input0 > [ 4.252844] Adding 4194300k swap on /i/SWAP. Priority:-2 extents:1 ac= ross:4194300k > [ 4.270569] mvpp2 f4000000.ethernet eth2: Link is Up - 100Mbps/Full - = flow control rx/tx > [ 4.278738] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready > [ 4.316754] usb 5-1.4.3: new low-speed USB device number 7 using xhci-= hcd > [....] Mounting local filesystems...[ ok done. > [....] Activating swapfile swap...[ ok done. > [....] Cleaning up temporary files...[ ok . > [ 4.366696] random: dd: uninitialized urandom read (512 bytes read) > [....] Starting Setting kernel variables: sysctl[ ok . > [ 4.468860] PPP generic driver version 2.4.2 > [ 4.474859] input: GASIA PS2toUSB Adapter as /devices/platform/cp1/cp1= :config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.0/000= 3:0E8F:0020.0003/input/input2 > [ 4.477505] NET: Registered protocol family 17 > [ 4.539749] NET: Registered protocol family 24 > [ 4.550179] hid-generic 0003:0E8F:0020.0003: input: USB HID v1.10 Keyb= oard [GASIA PS2toUSB Adapter] on usb-f4500000.usb3-1.4.3/input0 > [ 4.566423] input: GASIA PS2toUSB Adapter as /devices/platform/cp1/cp1= :config-space@f4000000/f4500000.usb3/usb5/5-1/5-1.4/5-1.4.3/5-1.4.3:1.1/000= 3:0E8F:0020.0004/input/input3 > [....] Configuring network interfaces...Plugin rp-pppoe.so loaded. > ifup: interface eth0 already configured > ifup: interface eth2 already configured > [ ok done. > [....] Cleaning up temporary files...[ ok . > [ 4.636900] hid-generic 0003:0E8F:0020.0004: input: USB HID v1.10 Mous= e [GASIA PS2toUSB Adapter] on usb-f4500000.usb3-1.4.3/input1 > [ 4.660387] random: alsactl: uninitialized urandom read (4 bytes read) > [....] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix[ = ok . > [....] Setting sensors limits...[ ok done. > [....] Setting up ALSA...[ ok done. > [....] Loading netfilter rules...run-parts: executing /usr/share/netfilte= r-persistent/plugins.d/15-ip4tables start > run-parts: executing /usr/share/netfilter-persistent/plugins.d/25-ip6tabl= es start > [ 4.743426] usb 5-1.4.4: new high-speed USB device number 8 using xhci= -hcd > [ ok done. > INIT: Entering runlevel: 2 > [info] Using makefile-style concurrent boot in runlevel 2. > [....] Enabling additional executable binary formats: binfmt-support[ ok = . > [....] Setting up console font and keymap...[ ok done. > [ 4.878142] udlfb 5-1.4.4:1.0: vendor descriptor length: 34 data: 22 5= f 01 00 20 05 00 01 03 00 04 > [ 4.887190] udlfb 5-1.4.4:1.0: DL chip limited to 2360000 pixel modes > [....] Starting enhanced syslogd: rsyslogd[ ok . > [ 5.046171] usb 5-1.4.4: Unable to get valid EDID from device/display > [ 5.055288] usb 5-1.4.4: fb1 is DisplayLink USB device (800x600, 1880K= framebuffer memory) > [ 5.063655] usbcore: registered new interface driver udlfb > [....] Starting system message bus: dbus[ ok . > [....] Loading cpufreq kernel modules...[ ok done (none). > [....] Starting mouse interface server: gpm[ ok . > [....] Starting NTP server: ntpd[ ok . > [ 5.167095] urandom_read: 3 callbacks suppressed > [ 5.167098] random: automount: uninitialized urandom read (4 bytes rea= d) > [ 5.195518] random: isc-worker0000: uninitialized urandom read (10 byt= es read) > [ 5.202800] random: isc-worker0000: uninitialized urandom read (40 byt= es read) > [....] Starting automount...[ ok . > [....] Starting domain name service...: bind9[ ok . > [....] Starting virtual private network daemon:[ ok . > [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, g= overnor not available...[ ok done. > Starting very small Busybox based DHCP server: Starting /usr/sbin/udhcpd.= .. > udhcpd. > Starting radvd: radvd. > [....] Starting periodic command scheduler: cron[ ok . > [....] Starting OpenBSD Secure Shell server: sshd[ ok . > [....] Starting WIDE DHCPv6 client: dhcp6c[ ok . > > Debian GNU/Linux buster/sid leontynka ttyS0 > > leontynka login: [ 10.373259] random: crng init done > [ 10.376676] random: 1 urandom warning(s) missed due to ratelimiting > [ 23.931568] tun: Universal TUN/TAP device driver, 1.6