Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v2 1/2] dt: bindings: lm3697: Add bindings for lm3697
 driver
To:     Pavel Machek <pavel@ucw.cz>
CC:     <robh+dt@kernel.org>, <jacek.anaszewski@gmail.com>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-leds@vger.kernel.org>
References: <20180807160442.8937-1-dmurphy@ti.com>
 <20180808195903.GB20912@amd> <f6b3534b-2ee9-782e-35e5-e103c34528bc@ti.com>
 <20180808210215.GA15831@amd>
From:   Dan Murphy <dmurphy@ti.com>
Message-ID: <f18a5616-bb25-da0d-aec8-585e042b4919@ti.com>
Date:   Wed, 8 Aug 2018 16:04:43 -0500
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101
 Thunderbird/52.9.1
MIME-Version: 1.0
In-Reply-To: <20180808210215.GA15831@amd>
Content-Type: text/plain; charset="windows-1252"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On 08/08/2018 04:02 PM, Pavel Machek wrote:
> Hi!
> 
>>>> +	- #size-cells : 0
>>>> +	- control-bank-cfg - : Indicates which sink is connected to which control bank
>>>> +		0 - All HVLED outputs are controlled by bank A
>>>> +		1 - HVLED1 is controlled bank B, HVLED2/3 are controlled by bank A
>>>> +		2 - HVLED2 is controlled bank B, HVLED1/3 are controlled by bank A
>>>> +		3 - HVLED1/2 are controlled by bank B, HVLED3 is controlled by bank A
>>>> +		4 - HVLED3 is controlled by bank B, HVLED1/2 are controlled by bank A
>>>> +		5 - HVLED1/3 is controlled by bank B, HVLED2 is controlled by bank A
>>>> +		6 - (default) HVLED1 is controlled by bank A, HVLED2/3 are controlled by bank B
>>>> +		7 - All HVLED outputs are controlled by bank B
>>>
>>> This is quite long way to describe a bitmask, no? Could we make
>>> it so that control-bank-cfg is not needed?
>>
>> The problem we have here is there is a potential to control
>> 3 different LED string but only 2 sinks.  So control bank A can control 2 LED strings and control
>> bank b can control 1 LED string.  
>>
> 
> Can we forget about the LED strings, and just expose the sinks as
> Linux LED devices?

2 sinks 3 LED strings.  How do you know which LED string is which and what bank it belongs
to when setting the brightness.  Each Bank has a separate register for brightness control.

Dan

> 									Pavel
> 


-- 
------------------
Dan Murphy