Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262359AbTI1Kn2 (ORCPT ); Sun, 28 Sep 2003 06:43:28 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262364AbTI1Kn2 (ORCPT ); Sun, 28 Sep 2003 06:43:28 -0400 Received: from louise.pinerecords.com ([213.168.176.16]:63691 "EHLO louise.pinerecords.com") by vger.kernel.org with ESMTP id S262359AbTI1KnV convert rfc822-to-8bit (ORCPT ); Sun, 28 Sep 2003 06:43:21 -0400 Date: Sun, 28 Sep 2003 12:43:12 +0200 From: Tomas Szepe To: "Brown, Len" Cc: lkml Subject: Re: HT not working by default since 2.4.22 Message-ID: <20030928104312.GA9770@louise.pinerecords.com> References: Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Disposition: inline Content-Transfer-Encoding: 8BIT In-Reply-To: User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org > > Hmm, I happen to know of a system that fails to detect the > > sibling CPU(s) with CONFIG_ACPI_HT_ONLY set, whereas w/o it > > "all fine running's." > > > > Is this a bug? > > Yes, could you file it on bugzilla.org Power management/acpi? It seems 2.4.23-pre5 can't enable the sibling CPU even with full ACPI enabled on this system... .config attached, relevant parts of dmesg follow: (The kernels I was talking about previously were 2.4.22-ac*.) Compaq ProLiant ML350 G3 detected: force use of acpi=ht ACPI: RSDP (v000 COMPAQ ) @ 0x000f4f70 ACPI: RSDT (v001 COMPAQ D14 0x00000002 ? 0x0000162e) @ 0x2fffa000 ACPI: FADT (v001 COMPAQ D14 0x00000002 ? 0x0000162e) @ 0x2fffa040 ACPI: MADT (v001 COMPAQ 00000083 0x00000002 ? 0x0000162e) @ 0x2fffa100 ACPI: SPCR (v001 COMPAQ SPCRRBSU 0x00000001 ? 0x0000162e) @ 0x2fffa1c0 ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC_NMI (acpi_id[0xff] polarity[0x0] trigger[0x0] lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. I/O APIC #3 Version 17 at 0xFEC01000. I/O APIC #4 Version 17 at 0xFEC02000. I/O APIC #5 Version 17 at 0xFEC03000. Enabling APIC mode: Flat. Using 4 I/O APICs Processors: 2 Kernel command line: root=/dev/md0 rw vga=normal Initializing CPU#0 Detected 1993.588 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3971.48 BogoMIPS Memory: 774560k/786408k available (1819k kernel code, 11460k reserved, 436k data, 288k init, 0k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 2.00GHz stepping 07 per-CPU timeslice cutoff: 1462.63 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. WARNING: No sibling found for CPU 0. ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 16. number of IO-APIC #3 registers: 16. number of IO-APIC #4 registers: 16. number of IO-APIC #5 registers: 16. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 1 1 0 1 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 1 1 0 1 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 001 01 1 1 0 1 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 000F0011 ....... : max redirection entries: 000F ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1993.4372 MHz. ..... host bus clock speed is 99.6718 MHz. cpu: 0, clocks: 996718, slice: 498359 CPU0 Waiting on wait_init_idle (map = 0x0) All processors have done init_idle ACPI: Subsystem revision 20030916 ACPI: Interpreter disabled. PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=5 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:0f.1 PCI: Device 00:00 not found by BIOS PCI: Device 00:01 not found by BIOS PCI: Device 00:02 not found by BIOS PCI: Device 00:78 not found by BIOS PCI: Device 00:7b not found by BIOS PCI: Device 00:88 not found by BIOS PCI: Device 00:8a not found by BIOS Linux NET4.0 for Linux 2.4 ... -- Tomas Szepe - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/