Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Thu, 16 Aug 2018 18:07:44 +0200
From:   Paul Cercueil <paul@crapouillou.net>
Subject: Re: [PATCH v6 06/24] clocksource: Add driver for the Ingenic JZ47xx
 OST
To:     Mathieu Malaterre <malat@debian.org>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>, thierry.reding@gmail.com,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Thomas Gleixner <tglx@linutronix.de>, wim@linux-watchdog.org,
        Guenter Roeck <linux@roeck-us.net>,
        Ralf Baechle <ralf@linux-mips.org>,
        Paul Burton <paul.burton@mips.com>,
        James Hogan <jhogan@kernel.org>,
        Jonathan Corbet <corbet@lwn.net>,
        Lee Jones <lee.jones@linaro.org>,
        Ezequiel Garcia <ezequiel@collabora.co.uk>,
        linux-pwm@vger.kernel.org,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>,
        linux-watchdog@vger.kernel.org,
        Linux-MIPS <linux-mips@linux-mips.org>,
        linux-doc@vger.kernel.org, linux-clk@vger.kernel.org,
        Maarten ter Huurne <maarten@treewalker.org>
Message-Id: <1534435664.5686.0@smtp.crapouillou.net>
In-Reply-To: <CA+7wUsxKtiJZD35dvT7UrmWYXcDdpmRq3NVM25=dX=4qQ_ewuw@mail.gmail.com>
References: <20180809214414.20905-1-paul@crapouillou.net>
        <20180809214414.20905-7-paul@crapouillou.net>
        <CA+7wUsxKtiJZD35dvT7UrmWYXcDdpmRq3NVM25=dX=4qQ_ewuw@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: quoted-printable
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Mathieu,

Le mar. 14 ao=FBt 2018 =E0 11:42, Mathieu Malaterre <malat@debian.org> a=20
=E9crit :
> On Thu, Aug 9, 2018 at 11:44 PM Paul Cercueil <paul@crapouillou.net>=20
> wrote:
>>=20
>>  From: Maarten ter Huurne <maarten@treewalker.org>
>>=20
>>  OST is the OS Timer, a 64-bit timer/counter with buffered reading.
>>=20
>>  SoCs before the JZ4770 had (if any) a 32-bit OST; the JZ4770 and
>>  JZ4780 have a 64-bit OST.
>>=20
>>  This driver will register both a clocksource and a sched_clock to=20
>> the
>>  system.
>=20
> With CONFIG_DEBUG_SECTION_MISMATCH=3Dy here is what I see:
>=20
>   MODPOST vmlinux.o
> WARNING: vmlinux.o(.data+0x26600): Section mismatch in reference from
> the variable ingenic_ost_driver to the function
> .init.text:ingenic_ost_probe()
> The variable ingenic_ost_driver references
> the function __init ingenic_ost_probe()
> If the reference is valid then annotate the
> variable with __init* or __refdata (see linux/init.h) or name the=20
> variable:
> *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
>=20
> WARNING: vmlinux.o(.data+0x26660): Section mismatch in reference from
> the variable ingenic_tcu_driver to the function
> .init.text:ingenic_tcu_probe()
> The variable ingenic_tcu_driver references
> the function __init ingenic_tcu_probe()
> If the reference is valid then annotate the
> variable with __init* or __refdata (see linux/init.h) or name the=20
> variable:
> *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console
>=20
> Thanks

Right, I'll fix it in V7.
Thanks!

>>  Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
>>  Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>>  ---
>>   drivers/clocksource/Kconfig       |   8 ++
>>   drivers/clocksource/Makefile      |   1 +
>>   drivers/clocksource/ingenic-ost.c | 208=20
>> ++++++++++++++++++++++++++++++++++++++
>>   3 files changed, 217 insertions(+)
>>   create mode 100644 drivers/clocksource/ingenic-ost.c
>>=20
>>   v5: New patch
>>=20
>>   v6: - Get rid of SoC IDs; pass pointer to ingenic_ost_soc_info as
>>         devicetree match data instead.
>>       - Use device_get_match_data() instead of the of_* variant
>>       - Handle error of dev_get_regmap() properly
>>=20
>>  diff --git a/drivers/clocksource/Kconfig=20
>> b/drivers/clocksource/Kconfig
>>  index 98f708208a8d..e855938c69f1 100644
>>  --- a/drivers/clocksource/Kconfig
>>  +++ b/drivers/clocksource/Kconfig
>>  @@ -619,4 +619,12 @@ config INGENIC_TIMER
>>          help
>>            Support for the timer/counter unit of the Ingenic JZ SoCs.
>>=20
>>  +config INGENIC_OST
>>  +       bool "Ingenic JZ47xx Operating System Timer"
>>  +       depends on MIPS || COMPILE_TEST
>>  +       depends on COMMON_CLK
>>  +       select INGENIC_TIMER
>>  +       help
>>  +         Support for the OS Timer of the Ingenic JZ4770 or similar=20
>> SoC.
>>  +
>>   endmenu
>>  diff --git a/drivers/clocksource/Makefile=20
>> b/drivers/clocksource/Makefile
>>  index 26877505d400..56ce37252944 100644
>>  --- a/drivers/clocksource/Makefile
>>  +++ b/drivers/clocksource/Makefile
>>  @@ -75,6 +75,7 @@ obj-$(CONFIG_ASM9260_TIMER)           +=3D=20
>> asm9260_timer.o
>>   obj-$(CONFIG_H8300_TMR8)               +=3D h8300_timer8.o
>>   obj-$(CONFIG_H8300_TMR16)              +=3D h8300_timer16.o
>>   obj-$(CONFIG_H8300_TPU)                        +=3D h8300_tpu.o
>>  +obj-$(CONFIG_INGENIC_OST)              +=3D ingenic-ost.o
>>   obj-$(CONFIG_INGENIC_TIMER)            +=3D ingenic-timer.o
>>   obj-$(CONFIG_CLKSRC_ST_LPC)            +=3D clksrc_st_lpc.o
>>   obj-$(CONFIG_X86_NUMACHIP)             +=3D numachip.o
>>  diff --git a/drivers/clocksource/ingenic-ost.c=20
>> b/drivers/clocksource/ingenic-ost.c
>>  new file mode 100644
>>  index 000000000000..400d30656790
>>  --- /dev/null
>>  +++ b/drivers/clocksource/ingenic-ost.c
>>  @@ -0,0 +1,208 @@
>>  +// SPDX-License-Identifier: GPL-2.0
>>  +/*
>>  + * JZ47xx SoCs TCU Operating System Timer driver
>>  + *
>>  + * Copyright (C) 2016 Maarten ter Huurne <maarten@treewalker.org>
>>  + * Copyright (C) 2018 Paul Cercueil <paul@crapouillou.net>
>>  + */
>>  +
>>  +#include <linux/clk.h>
>>  +#include <linux/clocksource.h>
>>  +#include <linux/mfd/ingenic-tcu.h>
>>  +#include <linux/module.h>
>>  +#include <linux/platform_device.h>
>>  +#include <linux/pm.h>
>>  +#include <linux/regmap.h>
>>  +#include <linux/sched_clock.h>
>>  +
>>  +#include "ingenic-timer.h"
>>  +
>>  +#define TCU_OST_TCSR_MASK      0xc0
>>  +#define TCU_OST_TCSR_CNT_MD    BIT(15)
>>  +
>>  +#define TCU_OST_CHANNEL                15
>>  +
>>  +struct ingenic_ost_soc_info {
>>  +       bool is64bit;
>>  +};
>>  +
>>  +struct ingenic_ost {
>>  +       struct regmap *map;
>>  +       struct clk *clk;
>>  +
>>  +       struct clocksource cs;
>>  +};
>>  +
>>  +static u64 notrace ingenic_ost_read_cntl(void)
>>  +{
>>  +       /* Bypass the regmap here as we must return as soon as=20
>> possible */
>>  +       return readl(ingenic_tcu_base + TCU_REG_OST_CNTL);
>>  +}
>>  +
>>  +static u64 notrace ingenic_ost_read_cnth(void)
>>  +{
>>  +       /* Bypass the regmap here as we must return as soon as=20
>> possible */
>>  +       return readl(ingenic_tcu_base + TCU_REG_OST_CNTH);
>>  +}
>>  +
>>  +static u64 notrace ingenic_ost_clocksource_read(struct clocksource=20
>> *cs)
>>  +{
>>  +       u32 val1, val2;
>>  +       u64 count, recount;
>>  +       s64 diff;
>>  +
>>  +       /*
>>  +        * The buffering of the upper 32 bits of the timer prevents=20
>> wrong
>>  +        * results from the bottom 32 bits overflowing due to the=20
>> timer ticking
>>  +        * along. However, it does not prevent wrong results from=20
>> simultaneous
>>  +        * reads of the timer, which could reset the buffer=20
>> mid-read.
>>  +        * Since this kind of wrong read can happen only when the=20
>> bottom bits
>>  +        * overflow, there will be minutes between wrong reads, so=20
>> if we read
>>  +        * twice in succession, at least one of the reads will be=20
>> correct.
>>  +        */
>>  +
>>  +       /* Bypass the regmap here as we must return as soon as=20
>> possible */
>>  +       val1 =3D readl(ingenic_tcu_base + TCU_REG_OST_CNTL);
>>  +       val2 =3D readl(ingenic_tcu_base + TCU_REG_OST_CNTHBUF);
>>  +       count =3D (u64)val1 | (u64)val2 << 32;
>>  +
>>  +       val1 =3D readl(ingenic_tcu_base + TCU_REG_OST_CNTL);
>>  +       val2 =3D readl(ingenic_tcu_base + TCU_REG_OST_CNTHBUF);
>>  +       recount =3D (u64)val1 | (u64)val2 << 32;
>>  +
>>  +       /*
>>  +        * A wrong read will produce a result that is 1<<32 too=20
>> high: the bottom
>>  +        * part from before overflow and the upper part from after=20
>> overflow.
>>  +        * Therefore, the lower value of the two reads is the=20
>> correct value.
>>  +        */
>>  +
>>  +       diff =3D (s64)(recount - count);
>>  +       if (unlikely(diff < 0))
>>  +               count =3D recount;
>>  +
>>  +       return count;
>>  +}
>>  +
>>  +static int __init ingenic_ost_probe(struct platform_device *pdev)
>>  +{
>>  +       const struct ingenic_ost_soc_info *soc_info;
>>  +       struct device *dev =3D &pdev->dev;
>>  +       struct ingenic_ost *ost;
>>  +       struct clocksource *cs;
>>  +       unsigned long rate, flags;
>>  +       int err;
>>  +
>>  +       soc_info =3D device_get_match_data(dev);
>>  +       if (!soc_info)
>>  +               return -EINVAL;
>>  +
>>  +       ost =3D devm_kzalloc(dev, sizeof(*ost), GFP_KERNEL);
>>  +       if (!ost)
>>  +               return -ENOMEM;
>>  +
>>  +       ost->map =3D dev_get_regmap(dev->parent, NULL);
>>  +       if (!ost->map) {
>>  +               dev_err(dev, "regmap not found\n");
>>  +               return -EINVAL;
>>  +       }
>>  +
>>  +       ost->clk =3D devm_clk_get(dev, "ost");
>>  +       if (IS_ERR(ost->clk))
>>  +               return PTR_ERR(ost->clk);
>>  +
>>  +       err =3D clk_prepare_enable(ost->clk);
>>  +       if (err)
>>  +               return err;
>>  +
>>  +       /* Clear counter high/low registers */
>>  +       if (soc_info->is64bit)
>>  +               regmap_write(ost->map, TCU_REG_OST_CNTL, 0);
>>  +       regmap_write(ost->map, TCU_REG_OST_CNTH, 0);
>>  +
>>  +       /* Don't reset counter at compare value. */
>>  +       regmap_update_bits(ost->map, TCU_REG_OST_TCSR,
>>  +                          TCU_OST_TCSR_MASK, TCU_OST_TCSR_CNT_MD);
>>  +
>>  +       rate =3D clk_get_rate(ost->clk);
>>  +
>>  +       /* Enable OST TCU channel */
>>  +       regmap_write(ost->map, TCU_REG_TESR, BIT(TCU_OST_CHANNEL));
>>  +
>>  +       cs =3D &ost->cs;
>>  +       cs->name        =3D "ingenic-ost";
>>  +       cs->rating      =3D 320;
>>  +       cs->flags       =3D CLOCK_SOURCE_IS_CONTINUOUS;
>>  +
>>  +       if (soc_info->is64bit) {
>>  +               cs->mask =3D CLOCKSOURCE_MASK(64);
>>  +               cs->read =3D ingenic_ost_clocksource_read;
>>  +       } else {
>>  +               cs->mask =3D CLOCKSOURCE_MASK(32);
>>  +               cs->read =3D (u64 (*)(struct clocksource=20
>> *))ingenic_ost_read_cnth;
>>  +       }
>>  +
>>  +       err =3D clocksource_register_hz(cs, rate);
>>  +       if (err) {
>>  +               dev_err(dev, "clocksource registration failed:=20
>> %d\n", err);
>>  +               clk_disable_unprepare(ost->clk);
>>  +               return err;
>>  +       }
>>  +
>>  +       /* Cannot register a sched_clock with interrupts on */
>>  +       local_irq_save(flags);
>>  +       if (soc_info->is64bit)
>>  +               sched_clock_register(ingenic_ost_read_cntl, 32,=20
>> rate);
>>  +       else
>>  +               sched_clock_register(ingenic_ost_read_cnth, 32,=20
>> rate);
>>  +       local_irq_restore(flags);
>>  +
>>  +       return 0;
>>  +}
>>  +
>>  +#ifdef CONFIG_PM_SLEEP
>>  +static int ingenic_ost_suspend(struct device *dev)
>>  +{
>>  +       struct ingenic_ost *ost =3D dev_get_drvdata(dev);
>>  +
>>  +       clk_disable(ost->clk);
>>  +       return 0;
>>  +}
>>  +
>>  +static int ingenic_ost_resume(struct device *dev)
>>  +{
>>  +       struct ingenic_ost *ost =3D dev_get_drvdata(dev);
>>  +
>>  +       return clk_enable(ost->clk);
>>  +}
>>  +
>>  +static SIMPLE_DEV_PM_OPS(ingenic_ost_pm_ops, ingenic_ost_suspend,
>>  +                        ingenic_ost_resume);
>>  +#define INGENIC_OST_PM_OPS (&ingenic_ost_pm_ops)
>>  +#else
>>  +#define INGENIC_OST_PM_OPS NULL
>>  +#endif /* CONFIG_PM_SUSPEND */
>>  +
>>  +static const struct ingenic_ost_soc_info jz4725b_ost_soc_info =3D {
>>  +       .is64bit =3D false,
>>  +};
>>  +
>>  +static const struct ingenic_ost_soc_info jz4770_ost_soc_info =3D {
>>  +       .is64bit =3D true,
>>  +};
>>  +
>>  +static const struct of_device_id ingenic_ost_of_match[] =3D {
>>  +       { .compatible =3D "ingenic,jz4725b-ost", .data =3D=20
>> &jz4725b_ost_soc_info, },
>>  +       { .compatible =3D "ingenic,jz4770-ost",  .data =3D=20
>> &jz4770_ost_soc_info,  },
>>  +       { }
>>  +};
>>  +MODULE_DEVICE_TABLE(of, ingenic_ost_of_match);
>>  +
>>  +static struct platform_driver ingenic_ost_driver =3D {
>>  +       .probe =3D ingenic_ost_probe,
>>  +       .driver =3D {
>>  +               .name   =3D "ingenic-ost",
>>  +               .pm     =3D INGENIC_OST_PM_OPS,
>>  +               .of_match_table =3D ingenic_ost_of_match,
>>  +       },
>>  +};
>>  +module_platform_driver(ingenic_ost_driver);
>>  --
>>  2.11.0
>>=20
=