Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263092AbTI3B6v (ORCPT ); Mon, 29 Sep 2003 21:58:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263100AbTI3B6v (ORCPT ); Mon, 29 Sep 2003 21:58:51 -0400 Received: from 64-60-248-67.cust.telepacific.net ([64.60.248.67]:16828 "EHLO mx.rackable.com") by vger.kernel.org with ESMTP id S263092AbTI3B6V (ORCPT ); Mon, 29 Sep 2003 21:58:21 -0400 Message-ID: <3F78E18F.50504@rackable.com> Date: Mon, 29 Sep 2003 18:51:11 -0700 From: Samuel Flory User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.5b) Gecko/20030827 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Ricky Beam CC: Linux Kernel Mail List Subject: Re: Tyan i7501 Pro (S2721-533) lock-up (e1000?) References: In-Reply-To: Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit X-OriginalArrivalTime: 30 Sep 2003 01:58:18.0210 (UTC) FILETIME=[51642420:01C386F6] Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Ricky Beam wrote: > I have a pair of these critters (one single, one dual Xeon) that constantly > lock up with any volume of traffic hits them. It doesn't appear to matter > which kernel version (2.4.20, 2.6.0 bk+) -- they all eventually lockup. > > I've tried with "acpi=off", "pci=noacpi", etc. In gig mode, it'll lockup > within seconds (with 25Mbps thrown at it.) In 100M/Full, it'll last a > few minutes. And at 100M/half, it'll last hours. Of course, they're > being ultra helpful by simply freezing without a single blip of why. > > Anyone else seeing similar problems with the i7501 pro? We been using a lot of 2721-533 without issues. Are you certain it's networking? Have you tried a mem tester like memtst86 or ctcs? Does the issue occur with addon cards, or the e100 nic? > > [root@xxx root]# lsmod > Module Size Used by > autofs 18560 0 > e1000 92032 0 > e100 64900 0 > [root@xxx root]# grep e1000 /etc/modprobe.conf > alias eth1 e1000 > alias eth2 e1000 > options e1000 FlowControl=0,0 RxDescriptors=4096,4096 TxDescriptors=1024,1024 > > Linux version 2.6.0-SMP-test6+BK@1.1347 (root@xxx) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 SMP BK(03/09/29-16:22:08-04:00) Mon Sep 29 16:49:37 EDT 2003 > Video mode to be used for restore is f00 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) > BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) > BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) > BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) > 1151MB HIGHMEM available. > 896MB LOWMEM available. > found SMP MP-table at 000ff780 > hm, page 000ff000 reserved twice. > hm, page 00100000 reserved twice. > hm, page 000f9000 reserved twice. > hm, page 000fa000 reserved twice. > On node 0 totalpages: 524272 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 225280 pages, LIFO batch:16 > HighMem zone: 294896 pages, LIFO batch:16 > DMI 2.3 present. > ACPI: RSDP (v000 ACPIAM ) @ 0x000f5020 > ACPI: RSDT (v001 A M I OEMRSDT 0x04000314 MSFT 0x00000097) @ 0x7fff0000 > ACPI: FADT (v002 A M I OEMFACP 0x04000314 MSFT 0x00000097) @ 0x7fff0200 > ACPI: MADT (v001 A M I OEMAPIC 0x04000314 MSFT 0x00000097) @ 0x7fff0300 > ACPI: OEMB (v001 A M I OEMBIOS 0x04000314 MSFT 0x00000097) @ 0x7ffff040 > ACPI: DSDT (v001 0ABBP 0ABBP003 0x00000003 INTL 0x02002026) @ 0x00000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > Processor #0 15:2 APIC version 20 > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled) > Processor #6 15:2 APIC version 20 > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > Processor #130 invalid (max 16) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > Processor #131 invalid (max 16) > Using ACPI for processor (LAPIC) configuration information > Intel MultiProcessor Specification v1.4 > Virtual Wire compatibility mode. > OEM ID: INTEL Product ID: KingsCanyonC APIC at: 0xFEE00000 > I/O APIC #7 Version 32 at 0xFEC00000. > I/O APIC #8 Version 32 at 0xFEC80000. > I/O APIC #9 Version 32 at 0xFEC80400. > I/O APIC #10 Version 32 at 0xFEC81000. > I/O APIC #11 Version 32 at 0xFEC81400. > Enabling APIC mode: Flat. Using 5 I/O APICs > Processors: 2 > Building zonelist for node : 0 > Kernel command line: root=/dev/hda3 pci=noacpi > Initializing CPU#0 > PID hash table entries: 4096 (order 12: 32768 bytes) > Detected 2791.341 MHz processor. > Console: colour VGA+ 80x25 > Memory: 2072432k/2097088k available (1586k kernel code, 23524k reserved, 654k data, 136k init, 1179584k highmem) > Calibrating delay loop... 5505.02 BogoMIPS > Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes) > Inode-cache hash table entries: 131072 (order: 7, 524288 bytes) > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: Hyper-Threading is disabled > CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available > CPU#0: Thermal monitoring enabled > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 > per-CPU timeslice cutoff: 1462.54 usecs. > task migration cache decay timeout: 2 msecs. > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Booting processor 1/6 eip 2000 > Initializing CPU#1 > masked ExtINT on CPU#1 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Calibrating delay loop... 5570.56 BogoMIPS > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: Hyper-Threading is disabled > CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU#1: Intel P4/Xeon Extended MCE MSRs (12) available > CPU#1: Thermal monitoring enabled > CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 > Total of 2 processors activated (11075.58 BogoMIPS). > ENABLING IO-APIC IRQs > Setting 7 in the phys_id_present_map > ...changing IO-APIC physical APIC ID to 7 ... ok. > Setting 8 in the phys_id_present_map > ...changing IO-APIC physical APIC ID to 8 ... ok. > Setting 9 in the phys_id_present_map > ...changing IO-APIC physical APIC ID to 9 ... ok. > Setting 10 in the phys_id_present_map > ...changing IO-APIC physical APIC ID to 10 ... ok. > Setting 11 in the phys_id_present_map > ...changing IO-APIC physical APIC ID to 11 ... ok. > init IO_APIC IRQs > IO-APIC (apicid-pin) 7-0, 7-9, 7-11, 7-15, 7-16, 7-20, 7-21, 7-22, 7-23, 8-0, 8-1, 8-2, 8-3, 8-4, 8-5, 8-6, 8-7, 8-8, 8-9, 8-10, 8-11, 8-12, 8-13, 8-14, 8-15, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22, 9-23, 10-0, 10-1, 10-2, 10-3, 10-4, 10-5, 10-6, 10-7, 10-8, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-19, 10-20, 10-21, 10-22, 10-23, 11-0, 11-1, 11-2, 11-3, 11-4, 11-5, 11-6, 11-7, 11-8, 11-9, 11-10, 11-11, 11-12, 11-13, 11-14, 11-15, 11-16, 11-17, 11-18, 11-19, 11-20, 11-21, 11-22, 11-23 not connected. > ..TIMER: vector=0x31 pin1=2 pin2=0 > number of MP IRQ sources: 19. > number of IO-APIC #7 registers: 24. > number of IO-APIC #8 registers: 24. > number of IO-APIC #9 registers: 24. > number of IO-APIC #10 registers: 24. > number of IO-APIC #11 registers: 24. > testing the IO APIC....................... > IO APIC #7...... > .... register #00: 07000000 > ....... : physical APIC id: 07 > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 00000000 > ....... : arbitration: 00 > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 000 00 1 0 0 0 0 0 2 16 > 01 001 01 0 0 0 0 0 1 1 39 > 02 001 01 0 0 0 0 0 1 1 31 > 03 001 01 0 0 0 0 0 1 1 41 > 04 001 01 0 0 0 0 0 1 1 49 > 05 001 01 0 0 0 0 0 1 1 51 > 06 001 01 0 0 0 0 0 1 1 59 > 07 001 01 0 0 0 0 0 1 1 61 > 08 001 01 0 0 0 0 0 1 1 69 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 001 01 0 0 0 0 0 1 1 71 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 001 01 0 0 0 0 0 1 1 79 > 0d 001 01 0 0 0 0 0 1 1 81 > 0e 001 01 0 0 0 0 0 1 1 89 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 001 01 1 1 0 1 0 1 1 91 > 12 001 01 1 1 0 1 0 1 1 99 > 13 001 01 1 1 0 1 0 1 1 A1 > 14 000 00 1 0 0 0 0 0 0 00 > 15 006 06 1 0 0 0 0 0 2 40 > 16 012 02 1 0 0 0 0 0 2 24 > 17 052 02 1 0 0 0 0 0 2 40 > IO APIC #8...... > .... register #00: 08000000 > ....... : physical APIC id: 08 > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 08000000 > ....... : arbitration: 08 > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 000 00 1 0 0 0 0 0 0 00 > 01 000 00 1 0 0 0 0 0 0 00 > 02 000 00 1 0 0 0 0 0 0 00 > 03 000 00 1 0 0 0 0 0 0 00 > 04 000 00 1 0 0 0 0 0 0 00 > 05 000 00 1 0 0 0 0 0 0 00 > 06 000 00 1 0 0 0 0 0 0 00 > 07 000 00 1 0 0 0 0 0 0 00 > 08 000 00 1 0 0 0 0 0 0 00 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 000 00 1 0 0 0 0 0 0 00 > 0d 000 00 1 0 0 0 0 0 0 00 > 0e 000 00 1 0 0 0 0 0 0 00 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 000 00 1 0 0 0 0 0 0 00 > 12 000 00 1 0 0 0 0 0 0 00 > 13 000 00 1 0 0 0 0 0 0 00 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IO APIC #9...... > .... register #00: 09000000 > ....... : physical APIC id: 09 > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 09000000 > ....... : arbitration: 09 > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 001 01 1 1 0 1 0 1 1 A9 > 01 001 01 1 1 0 1 0 1 1 B1 > 02 000 00 1 0 0 0 0 0 0 00 > 03 000 00 1 0 0 0 0 0 0 00 > 04 000 00 1 0 0 0 0 0 0 00 > 05 000 00 1 0 0 0 0 0 0 00 > 06 000 00 1 0 0 0 0 0 0 00 > 07 000 00 1 0 0 0 0 0 0 00 > 08 000 00 1 0 0 0 0 0 0 00 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 000 00 1 0 0 0 0 0 0 00 > 0d 000 00 1 0 0 0 0 0 0 00 > 0e 000 00 1 0 0 0 0 0 0 00 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 000 00 1 0 0 0 0 0 0 00 > 12 000 00 1 0 0 0 0 0 0 00 > 13 000 00 1 0 0 0 0 0 0 00 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IO APIC #10...... > .... register #00: 0A000000 > ....... : physical APIC id: 0A > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 0A000000 > ....... : arbitration: 0A > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 000 00 1 0 0 0 0 0 0 00 > 01 000 00 1 0 0 0 0 0 0 00 > 02 000 00 1 0 0 0 0 0 0 00 > 03 000 00 1 0 0 0 0 0 0 00 > 04 000 00 1 0 0 0 0 0 0 00 > 05 000 00 1 0 0 0 0 0 0 00 > 06 000 00 1 0 0 0 0 0 0 00 > 07 000 00 1 0 0 0 0 0 0 00 > 08 000 00 1 0 0 0 0 0 0 00 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 000 00 1 0 0 0 0 0 0 00 > 0d 000 00 1 0 0 0 0 0 0 00 > 0e 000 00 1 0 0 0 0 0 0 00 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 000 00 1 0 0 0 0 0 0 00 > 12 000 00 1 0 0 0 0 0 0 00 > 13 000 00 1 0 0 0 0 0 0 00 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IO APIC #11...... > .... register #00: 0B000000 > ....... : physical APIC id: 0B > ....... : Delivery Type: 0 > ....... : LTS : 0 > .... register #01: 00178020 > ....... : max redirection entries: 0017 > ....... : PRQ implemented: 1 > ....... : IO APIC version: 0020 > .... register #02: 0B000000 > ....... : arbitration: 0B > .... register #03: 00000001 > ....... : Boot DT : 1 > .... IRQ redirection table: > NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: > 00 000 00 1 0 0 0 0 0 0 00 > 01 000 00 1 0 0 0 0 0 0 00 > 02 000 00 1 0 0 0 0 0 0 00 > 03 000 00 1 0 0 0 0 0 0 00 > 04 000 00 1 0 0 0 0 0 0 00 > 05 000 00 1 0 0 0 0 0 0 00 > 06 000 00 1 0 0 0 0 0 0 00 > 07 000 00 1 0 0 0 0 0 0 00 > 08 000 00 1 0 0 0 0 0 0 00 > 09 000 00 1 0 0 0 0 0 0 00 > 0a 000 00 1 0 0 0 0 0 0 00 > 0b 000 00 1 0 0 0 0 0 0 00 > 0c 000 00 1 0 0 0 0 0 0 00 > 0d 000 00 1 0 0 0 0 0 0 00 > 0e 000 00 1 0 0 0 0 0 0 00 > 0f 000 00 1 0 0 0 0 0 0 00 > 10 000 00 1 0 0 0 0 0 0 00 > 11 000 00 1 0 0 0 0 0 0 00 > 12 000 00 1 0 0 0 0 0 0 00 > 13 000 00 1 0 0 0 0 0 0 00 > 14 000 00 1 0 0 0 0 0 0 00 > 15 000 00 1 0 0 0 0 0 0 00 > 16 000 00 1 0 0 0 0 0 0 00 > 17 000 00 1 0 0 0 0 0 0 00 > IRQ to pin mappings: > IRQ0 -> 0:2 > IRQ1 -> 0:1 > IRQ3 -> 0:3 > IRQ4 -> 0:4 > IRQ5 -> 0:5 > IRQ6 -> 0:6 > IRQ7 -> 0:7 > IRQ8 -> 0:8 > IRQ10 -> 0:10 > IRQ12 -> 0:12 > IRQ13 -> 0:13 > IRQ14 -> 0:14 > IRQ17 -> 0:17 > IRQ18 -> 0:18 > IRQ19 -> 0:19 > IRQ48 -> 2:0 > IRQ49 -> 2:1 > .................................... done. > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 2790.0390 MHz. > ..... host bus clock speed is 132.0875 MHz. > checking TSC synchronization across 2 CPUs: passed. > Starting migration thread for cpu 0 > Bringing up 1 > CPU 1 IS NOW UP! > Starting migration thread for cpu 1 > CPUS done 4 > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > ACPI: Subsystem revision 20030813 > ACPI: Interpreter enabled > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (00:00) > PCI: Probing PCI hardware (bus 00) > Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P6._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5.P5P7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P3._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.P2P4._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15, disabled) > PCI: Probing PCI hardware > PCI: Using IRQ router PIIX [8086/2480] at 0000:00:1f.0 > PCI->APIC IRQ transform: (B0,I31,P0) -> 18 > PCI->APIC IRQ transform: (B0,I31,P1) -> 17 > PCI->APIC IRQ transform: (B7,I1,P0) -> 48 > PCI->APIC IRQ transform: (B7,I1,P1) -> 49 > PCI->APIC IRQ transform: (B1,I1,P0) -> 19 > PCI->APIC IRQ transform: (B1,I2,P0) -> 18 > Machine check exception polling timer started. > Starting balanced_irq > highmem bounce pool size: 64 pages > VFS: Disk quotas dquot_6.5.1 > Initializing Cryptographic API > pty: 2048 Unix98 ptys configured > Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > ICH3: IDE controller at PCI slot 0000:00:1f.1 > PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) > ICH3: chipset revision 2 > ICH3: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio > hda: ST340014A, ATA DISK drive > Using anticipatory io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: max request size: 1024KiB > hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) > hda: TCQ not supported > hda: hda1 hda2 hda3 > mice: PS/2 mouse device common for all mice > serio: i8042 AUX port at 0x60,0x64 irq 12 > input: AT Translated Set 2 keyboard on isa0060/serio0 > serio: i8042 KBD port at 0x60,0x64 irq 1 > NET: Registered protocol family 2 > IP: routing cache hash table of 16384 buckets, 128Kbytes > TCP: Hash tables configured (established 524288 bind 65536) > NET: Registered protocol family 1 > NET: Registered protocol family 17 > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 136k freed > EXT3 FS on hda3, internal journal > Adding 2040244k swap on /dev/hda2. Priority:-1 extents:1 > kjournald starting. Commit interval 5 seconds > EXT3 FS on hda1, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > > > (lspci -n) > 00:00.0 Class 0600: 8086:254c (rev 01) > 00:02.0 Class 0604: 8086:2543 (rev 01) > 00:03.0 Class 0604: 8086:2545 (rev 01) > 00:1e.0 Class 0604: 8086:244e (rev 42) > 00:1f.0 Class 0601: 8086:2480 (rev 02) > 00:1f.1 Class 0101: 8086:248b (rev 02) > 00:1f.3 Class 0c05: 8086:2483 (rev 02) > 01:01.0 Class 0200: 8086:1229 (rev 10) > 01:02.0 Class 0300: 1002:4752 (rev 27) > 02:1c.0 Class 0800: 8086:1461 (rev 04) > 02:1d.0 Class 0604: 8086:1460 (rev 04) > 02:1e.0 Class 0800: 8086:1461 (rev 04) > 02:1f.0 Class 0604: 8086:1460 (rev 04) > 05:1c.0 Class 0800: 8086:1461 (rev 04) > 05:1d.0 Class 0604: 8086:1460 (rev 04) > 05:1e.0 Class 0800: 8086:1461 (rev 04) > 05:1f.0 Class 0604: 8086:1460 (rev 04) > 07:01.0 Class 0200: 8086:1010 (rev 01) > 07:01.1 Class 0200: 8086:1010 (rev 01) > > (lspci -vv -xxx) > 00:00.0 Host bridge: Intel Corp.: Unknown device 254c (rev 01) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Capabilities: [40] #09 [1105] > 00: 86 80 4c 25 06 01 90 00 01 00 00 06 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 > 40: 09 00 05 11 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 04 20 0d 00 00 00 00 00 00 10 11 11 00 00 33 33 > 60: 00 00 08 10 18 20 20 20 00 00 00 00 00 00 00 00 > 70: 00 33 33 00 00 00 00 00 04 00 01 28 79 02 67 20 > 80: 62 06 71 00 00 00 00 00 00 98 10 d2 89 00 00 00 > 90: 00 00 00 00 00 00 00 00 55 05 55 05 03 1a 38 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 44 c0 50 11 00 80 ff 03 00 00 00 00 00 00 00 00 > d0: 02 28 00 0e 03 00 00 33 80 09 31 b5 00 00 01 01 > e0: 1d 1d 00 00 00 00 00 00 54 46 00 00 00 00 00 00 > f0: 00 00 00 00 74 00 30 40 40 0f 00 00 00 00 00 00 > > 00:02.0 PCI bridge: Intel Corp. e7500 [Plumas] HI_B Virtual PCI Bridge (F0) (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=05, subordinate=07, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fe800000-feafffff > Prefetchable memory behind bridge: ff700000-ff9fffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > 00: 86 80 43 25 07 01 a0 00 01 00 04 06 00 40 01 00 > 10: 00 00 00 00 00 00 00 00 00 05 07 00 e0 e0 a0 22 > 20: 80 fe a0 fe 70 ff 90 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 3e 00 00 0e 54 46 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:03.0 PCI bridge: Intel Corp. e7500 [Plumas] HI_C Virtual PCI Bridge (F0) (rev 01) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64 > Bus: primary=00, secondary=02, subordinate=04, sec-latency=0 > I/O behind bridge: 0000c000-0000dfff > Memory behind bridge: fe500000-fe7fffff > Prefetchable memory behind bridge: ff400000-ff6fffff > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > 00: 86 80 45 25 07 01 a0 00 01 00 04 06 00 40 01 00 > 10: 00 00 00 00 00 00 00 00 00 02 04 00 c0 d0 a0 22 > 20: 50 fe 70 fe 40 ff 60 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 3e 00 00 0e 56 44 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB PCI Bridge (rev 42) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: fc400000-fe4fffff > Prefetchable memory behind bridge: ff300000-ff3fffff > BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > 00: 86 80 4e 24 07 01 80 00 42 00 04 06 00 00 01 00 > 10: 00 00 00 00 00 00 00 00 00 01 01 20 b0 b0 80 22 > 20: 40 fc 40 fe 30 ff 30 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0a 00 > 40: 02 28 20 20 00 01 00 00 00 00 00 00 00 00 00 00 > 50: 02 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 88 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 10 00 08 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 01 00 02 00 00 00 c0 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 6b 2c > > 00:1f.0 ISA bridge: Intel Corp. 82801CA ISA Bridge (LPC) (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > 00: 86 80 80 24 0f 00 80 02 02 00 01 06 00 00 80 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 40: 01 04 00 00 10 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 01 05 00 00 10 00 00 00 > 60: 0f 80 0b 09 d1 00 00 00 80 80 80 80 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: ff fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 02 00 00 00 00 00 00 0d 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 86 21 00 00 02 05 00 00 04 00 00 00 00 00 00 00 > e0: 10 00 00 c0 00 00 0f 14 33 22 11 00 00 00 67 45 > f0: 00 00 60 87 00 00 00 00 47 0f 0e 00 00 00 81 00 > > 00:1f.1 IDE interface: Intel Corp. 82801CA IDE U100 (rev 02) (prog-if 8a [Master SecP PriP]) > Subsystem: Intel Corp.: Unknown device 2480 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 18 > Region 0: I/O ports at > Region 1: I/O ports at > Region 2: I/O ports at > Region 3: I/O ports at > Region 4: I/O ports at ffa0 [size=16] > Region 5: Memory at 80000000 (32-bit, non-prefetchable) [size=1K] > 00: 86 80 8b 24 07 00 80 02 02 8a 01 01 00 00 00 00 > 10: 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 > 20: a1 ff 00 00 00 00 00 80 00 00 00 00 86 80 80 24 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 00 00 > 40: 07 e3 00 00 00 00 00 00 01 00 01 00 00 00 00 00 > 50: 00 00 00 00 31 14 00 00 00 00 00 00 00 00 00 00 > 60: 08 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02) > Subsystem: Intel Corp.: Unknown device 2480 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin B routed to IRQ 17 > Region 4: I/O ports at 0540 [size=32] > 00: 86 80 83 24 01 00 80 02 02 00 05 0c 00 00 00 00 > 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 41 05 00 00 00 00 00 00 00 00 00 00 86 80 80 24 > 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 > 40: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 47 0f 00 00 00 00 00 00 > > 01:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10) > Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (2000ns min, 14000ns max), cache line size 10 > Interrupt: pin A routed to IRQ 19 > Region 0: Memory at fe4fe000 (32-bit, non-prefetchable) [size=4K] > Region 1: I/O ports at bc00 [size=64] > Region 2: Memory at fe4a0000 (32-bit, non-prefetchable) [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > 00: 86 80 29 12 17 01 90 02 10 00 00 02 10 40 00 00 > 10: 00 e0 4f fe 01 bc 00 00 00 00 4a fe 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 40 10 > 30: 00 00 00 00 dc 00 00 00 00 00 00 00 09 01 08 38 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 fe > e0: 00 40 00 4b 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 01:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) > Subsystem: ATI Technologies Inc Rage XL > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (2000ns min), cache line size 10 > Interrupt: pin A routed to IRQ 18 > Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] > Region 1: I/O ports at b800 [size=256] > Region 2: Memory at fe4ff000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at fe4c0000 [disabled] [size=128K] > Capabilities: [5c] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > 00: 02 10 52 47 87 00 90 02 27 00 00 03 10 40 00 00 > 10: 00 00 00 fd 01 b8 00 00 00 f0 4f fe 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 08 80 > 30: 00 00 4c fe 5c 00 00 00 00 00 00 00 0b 01 08 00 > 40: 0c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 02 5c 10 00 01 00 00 ff 00 00 00 00 01 00 02 06 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) > Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE- ERO- RBC=0 OST=0 > Status: Bus=2 Dev=28 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 > 10: 00 e0 7f fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 > 40: 14 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 00 00 e0 02 03 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 3f 00 00 00 3f 00 00 00 3f 00 00 00 3f 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: f4 00 00 00 f4 00 00 00 f4 00 00 00 f4 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64, cache line size 10 > Bus: primary=02, secondary=04, subordinate=04, sec-latency=64 > Memory behind bridge: fe600000-fe6fffff > Prefetchable memory behind bridge: 00000000ff500000-00000000ff500000 > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE+ ERO+ RBC=0 OST=0 > Status: Bus=2 Dev=29 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 60 14 06 01 30 00 04 00 04 06 10 40 01 00 > 10: 00 00 00 00 00 00 00 00 02 04 04 40 f0 00 a0 22 > 20: 60 fe 60 fe 51 ff 51 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 > 40: 80 e1 08 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 83 00 e8 02 03 00 ff ff ff ff ff ff ff ff > 60: 00 04 e0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 > 70: 00 f8 00 00 00 00 00 00 04 e8 02 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 8f c3 00 00 22 20 00 00 00 00 00 00 00 00 00 00 > f0: 10 02 00 00 00 00 00 00 32 22 37 77 ff bf ff bf > > 02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) > Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Region 0: Memory at fe7ff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE- ERO- RBC=0 OST=0 > Status: Bus=2 Dev=30 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 > 10: 00 f0 7f fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 > 40: 10 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 00 00 f0 02 03 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 3f 00 00 00 3f 00 00 00 3f 00 00 00 3f 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 54 00 00 00 54 00 00 00 54 00 00 00 54 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64, cache line size 10 > Bus: primary=02, secondary=03, subordinate=03, sec-latency=64 > I/O behind bridge: 0000c000-0000dfff > Memory behind bridge: fe500000-fe5fffff > Prefetchable memory behind bridge: 00000000ff400000-00000000ff400000 > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE+ ERO+ RBC=0 OST=4 > Status: Bus=2 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 60 14 07 01 30 00 04 00 04 06 10 40 01 00 > 10: 00 00 00 00 00 00 00 00 02 03 03 40 c0 d0 a0 22 > 20: 50 fe 50 fe 41 ff 41 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 > 40: c0 f1 08 00 01 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 c3 00 f8 02 03 00 ff ff ff ff ff ff ff ff > 60: 00 04 f0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 > 70: 00 f8 00 00 00 00 00 00 03 f8 02 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 8f c3 00 00 22 20 00 00 00 00 00 00 00 00 00 00 > f0: 32 03 04 c0 5b 21 00 00 32 22 37 77 ff bf ff bf > > 05:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) > Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE- ERO- RBC=0 OST=0 > Status: Bus=5 Dev=28 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 > 10: 00 e0 af fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 > 40: 04 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 00 00 e0 05 03 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 11 00 00 00 11 00 00 00 11 00 00 00 11 00 00 00 > 90: 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 01 > a0: 70 00 00 00 70 00 00 00 70 00 00 00 70 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 05:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64, cache line size 10 > Bus: primary=05, secondary=07, subordinate=07, sec-latency=64 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: fe900000-fe9fffff > Prefetchable memory behind bridge: 00000000ff800000-00000000ff800000 > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE+ ERO+ RBC=0 OST=4 > Status: Bus=5 Dev=29 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 60 14 07 01 30 00 04 00 04 06 10 40 01 00 > 10: 00 00 00 00 00 00 00 00 05 07 07 40 e0 e0 a0 22 > 20: 90 fe 90 fe 81 ff 81 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 > 40: c0 01 08 00 01 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 c3 00 e8 05 03 00 ff ff ff ff ff ff ff ff > 60: 00 04 e0 00 00 00 00 00 00 00 00 00 0f 0a 00 00 > 70: 00 f8 00 00 00 00 00 00 07 e8 05 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 8f c3 00 00 21 20 00 00 00 00 00 00 00 00 00 00 > f0: 10 02 00 00 00 00 00 00 32 22 37 77 ff bf ff bf > > 05:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 [IO(X)-APIC]) > Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE- ERO- RBC=0 OST=0 > Status: Bus=5 Dev=30 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 61 14 06 01 30 00 04 20 00 08 00 00 00 00 > 10: 00 f0 af fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 00 00 00 00 00 00 00 00 00 00 00 00 86 80 61 14 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00 > 40: 00 88 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 00 00 f0 05 03 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 3f 00 00 00 3f 00 00 00 3f 00 00 00 3f 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 90 00 00 00 90 00 00 00 90 00 00 00 90 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 05:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 00 [Normal decode]) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 64, cache line size 10 > Bus: primary=05, secondary=06, subordinate=06, sec-latency=64 > Memory behind bridge: fe800000-fe8fffff > Prefetchable memory behind bridge: 00000000ff700000-00000000ff700000 > BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] PCI-X non-bridge device. > Command: DPERE+ ERO+ RBC=0 OST=0 > Status: Bus=5 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-00: 86 80 60 14 06 01 30 00 04 00 04 06 10 40 01 00 > 10: 00 00 00 00 00 00 00 00 05 06 06 40 f0 00 a0 22 > 20: 80 fe 80 fe 71 ff 71 ff 00 00 00 00 00 00 00 00 > 30: 00 00 00 00 50 00 00 00 00 00 00 00 00 00 06 00 > 40: 40 00 08 00 01 00 00 00 00 00 00 00 00 00 00 00 > 50: 07 00 03 00 f8 05 03 00 ff ff ff ff ff ff ff ff > 60: 00 04 f0 00 00 00 00 00 00 00 00 00 00 0a 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > e0: af c3 00 00 23 20 00 00 00 00 00 00 00 00 00 00 > f0: 32 03 04 c2 5b 21 00 00 32 22 37 77 ff bf ff bf > > 07:01.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01) > Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (63750ns min), cache line size 10 > Interrupt: pin A routed to IRQ 48 > Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=128K] > Region 4: I/O ports at e880 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device. > Command: DPERE- ERO+ RBC=0 OST=0 > Status: Bus=7 Dev=1 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > 00: 86 80 10 10 17 01 30 02 01 00 00 02 10 40 80 00 > 10: 04 00 9c fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 81 e8 00 00 00 00 00 00 00 00 00 00 86 80 11 10 > 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0f 01 ff 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 22 48 > e0: 00 20 00 28 07 f0 02 00 08 07 43 04 00 00 00 00 > f0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 > > 07:01.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller (Copper) (rev 01) > Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 64 (63750ns min), cache line size 10 > Interrupt: pin B routed to IRQ 49 > Region 0: Memory at fe9e0000 (64-bit, non-prefetchable) [size=128K] > Region 4: I/O ports at ec00 [size=64] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [e4] PCI-X non-bridge device. > Command: DPERE- ERO+ RBC=0 OST=0 > Status: Bus=7 Dev=1 Func=1 64bit+ 133MHz+ SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM- Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > 00: 86 80 10 10 17 01 30 02 01 00 00 02 10 40 80 00 > 10: 04 00 9e fe 00 00 00 00 00 00 00 00 00 00 00 00 > 20: 01 ec 00 00 00 00 00 00 00 00 00 00 86 80 11 10 > 30: 00 00 00 00 dc 00 00 00 00 00 00 00 0f 02 ff 00 > 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 e4 22 48 > e0: 00 20 00 28 07 f0 02 00 09 07 43 04 00 00 00 00 > f0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 > > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- Once you have their hardware. Never give it back. (The First Rule of Hardware Acquisition) Sam Flory - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/