Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Chunyan Zhang <zhang.chunyan@linaro.org>
To:     Ulf Hansson <ulf.hansson@linaro.org>,
        Adrian Hunter <adrian.hunter@intel.com>
Cc:     linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
        Orson Zhai <orsonzhai@gmail.com>,
        Baolin Wang <baolin.wang@linaro.org>,
        Billows Wu <billows.wu@unisoc.com>,
        Jason Wu <jason.wu@unisoc.com>,
        Chunyan Zhang <chunyan.zhang@unisoc.com>,
        Chunyan Zhang <zhang.lyra@gmail.com>
Subject: [PATCH V6 9/9] dt-bindings: sdhci-sprd: Add bindings for the sdhci-sprd controller
Date:   Fri, 24 Aug 2018 17:20:28 +0800
Message-Id: <1535102428-20332-10-git-send-email-zhang.chunyan@linaro.org>
In-Reply-To: <1535102428-20332-1-git-send-email-zhang.chunyan@linaro.org>
References: <1535102428-20332-1-git-send-email-zhang.chunyan@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

From: Chunyan Zhang <chunyan.zhang@unisoc.com>

This patch adds the device-tree binding documentation for Spreadtrum
SDHCI driver.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 .../devicetree/bindings/mmc/sdhci-sprd.txt         | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-sprd.txt

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
new file mode 100644
index 0000000..45c9978
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-sprd.txt
@@ -0,0 +1,41 @@
+* Spreadtrum SDHCI controller (sdhci-sprd)
+
+The Secure Digital (SD) Host controller on Spreadtrum SoCs provides an interface
+for MMC, SD and SDIO types of cards.
+
+This file documents differences between the core properties in mmc.txt
+and the properties used by the sdhci-sprd driver.
+
+Required properties:
+- compatible: Should contain "sprd,sdhci-r11".
+- reg: physical base address of the controller and length.
+- interrupts: Interrupts used by the SDHCI controller.
+- clocks: Should contain phandle for the clock feeding the SDHCI controller
+- clock-names: Should contain the following:
+	"sdio" - SDIO source clock (required)
+	"enable" - gate clock which used for enabling/disabling the device (required)
+
+Optional properties:
+- assigned-clocks: the same with "sdio" clock
+- assigned-clock-parents: the default parent of "sdio" clock
+
+Examples:
+
+sdio0: sdio@20600000 {
+	compatible  = "sprd,sdhci-r11";
+	reg = <0 0x20600000 0 0x1000>;
+	interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+
+	clock-names = "sdio", "enable";
+	clocks = <&ap_clk CLK_EMMC_2X>,
+		 <&apahb_gate CLK_EMMC_EB>;
+	assigned-clocks = <&ap_clk CLK_EMMC_2X>;
+	assigned-clock-parents = <&rpll CLK_RPLL_390M>;
+
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
-- 
2.7.4