Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
In-Reply-To: <b3c25cedfa3a9b8a4b481e714992afe62b84ca3b.1531899325.git.amit.kucheria@linaro.org>
References: <cover.1531899325.git.amit.kucheria@linaro.org> <b3c25cedfa3a9b8a4b481e714992afe62b84ca3b.1531899325.git.amit.kucheria@linaro.org>
From:   Amit Kucheria <amit.kucheria@linaro.org>
Date:   Tue, 28 Aug 2018 21:07:03 +0530
Message-ID: <CAHLCerOxDvueVoCn7H197x01-kJ2C7C+hNqYT5T1yCNHJAioTQ@mail.gmail.com>
Subject: Re: [PATCH v1] arm64: dts: sdm845: enable tsens thermal zones
To:     Andy Gross <andy.gross@linaro.org>
Cc:     Rajendra Nayak <rnayak@codeaurora.org>,
        linux-arm-msm <linux-arm-msm@vger.kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Douglas Anderson <dianders@chromium.org>,
        Matthias Kaehlcke <mka@chromium.org>,
        Eduardo Valentin <edubezval@gmail.com>,
        David Brown <david.brown@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Will Deacon <will.deacon@arm.com>,
        "open list:ARM/QUALCOMM SUPPORT" <linux-soc@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        lakml <linux-arm-kernel@lists.infradead.org>,
        LKML <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Andy,

Do you have any feedback for this patch?

Regards,
Amit

On Wed, Jul 18, 2018 at 1:19 PM, Amit Kucheria <amit.kucheria@linaro.org> wrote:
> One thermal zone per cpu is defined
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sdm845.dtsi | 170 +++++++++++++++++++++++++++++++++++
>  1 file changed, 170 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index 01ff146..a75be7c 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -340,4 +340,174 @@
>                         };
>                 };
>         };
> +
> +       thermal-zones {
> +               cpu0-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 1>;
> +
> +                       trips {
> +                               cpu_alert0: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit0: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu1-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 2>;
> +
> +                       trips {
> +                               cpu_alert1: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit1: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu2-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 3>;
> +
> +                       trips {
> +                               cpu_alert2: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit2: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu3-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 4>;
> +
> +                       trips {
> +                               cpu_alert3: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit3: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu4-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 7>;
> +
> +                       trips {
> +                               cpu_alert4: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit4: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu5-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 8>;
> +
> +                       trips {
> +                               cpu_alert5: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit5: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu6-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 9>;
> +
> +                       trips {
> +                               cpu_alert6: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit6: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +
> +               cpu7-thermal {
> +                       polling-delay-passive = <250>;
> +                       polling-delay = <1000>;
> +
> +                       thermal-sensors = <&tsens0 10>;
> +
> +                       trips {
> +                               cpu_alert7: trip0 {
> +                                       temperature = <75000>;
> +                                       hysteresis = <2000>;
> +                                       type = "passive";
> +                               };
> +
> +                               cpu_crit7: trip1 {
> +                                       temperature = <110000>;
> +                                       hysteresis = <1000>;
> +                                       type = "critical";
> +                               };
> +                       };
> +               };
> +       };
>  };
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html