Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v2 1/2] GPIO: add single-register gpio via creg driver
To:     Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>,
        linux-snps-arc@lists.infradead.org, linux-gpio@vger.kernel.org
Cc:     linux-kernel@vger.kernel.org,
        Vineet Gupta <Vineet.Gupta1@synopsys.com>,
        Alexey Brodkin <Alexey.Brodkin@synopsys.com>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        Mark Rutland <mark.rutland@arm.com>
References: <20180828112721.28178-1-Eugeniy.Paltsev@synopsys.com>
 <20180828112721.28178-2-Eugeniy.Paltsev@synopsys.com>
From:   Randy Dunlap <rdunlap@infradead.org>
Message-ID: <024be088-15ff-89ed-3766-09eb64e47342@infradead.org>
Date:   Tue, 28 Aug 2018 11:15:47 -0700
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101
 Thunderbird/52.9.1
MIME-Version: 1.0
In-Reply-To: <20180828112721.28178-2-Eugeniy.Paltsev@synopsys.com>
Content-Type: text/plain; charset=utf-8
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi,

I don't see any updates/corrections here.  :(

On 08/28/2018 04:27 AM, Eugeniy Paltsev wrote:

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 71c0ab46f216..0f9cc1582cab 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -430,6 +430,15 @@ config GPIO_REG
>  	  A 32-bit single register GPIO fixed in/out implementation.  This
>  	  can be used to represent any register as a set of GPIO signals.
>  
> +config GPIO_SNPS_CREG
> +	bool "GPIO via CREG (Control REGisers) driver"
> +	select OF_GPIO
> +	help
> +	  This driver supports GPIOs via CREG on various Synopsys SoCs.
> +	  This is is single-register MMIO gpio driver for complex cases
> +	  where only several fields in register belong to GPIO and
> +	  each GPIO owns field with different length and on/off values.
> +
>  config GPIO_SPEAR_SPICS
>  	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
>  	depends on PLAT_SPEAR


-- 
~Randy