Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262190AbTKCTvf (ORCPT ); Mon, 3 Nov 2003 14:51:35 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262196AbTKCTvf (ORCPT ); Mon, 3 Nov 2003 14:51:35 -0500 Received: from ale.atd.ucar.edu ([128.117.80.15]:57514 "EHLO ale.atd.ucar.edu") by vger.kernel.org with ESMTP id S262190AbTKCTu7 convert rfc822-to-8bit (ORCPT ); Mon, 3 Nov 2003 14:50:59 -0500 From: "Charles Martin" To: Cc: Subject: RE: interrupts across PCI bridge(s) not handled Date: Mon, 3 Nov 2003 12:50:51 -0700 Message-ID: <004f01c3a243$ccbaf960$c3507580@atdsputnik> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.2627 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Importance: Normal In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 43096 Lines: 1016 > -----Original Message----- > From: Linus Torvalds [mailto:torvalds@osdl.org] > Sent: Monday, November 03, 2003 10:04 AM > To: Charles Martin > Cc: linux-kernel@vger.kernel.org > Subject: Re: interrupts across PCI bridge(s) not handled > > > > On Mon, 3 Nov 2003, Charles Martin wrote: > > > > I have a pci backplane extender, with 4 cards > > (named piraq) in it. The cards are detected by > > the PCI system, and irqs 92-95 are assigned, > > as shown in /var/log/messages: > > > > kernel: PCI->APIC IRQ transform: (B6,I4,P0) -> 93 > > kernel: PCI->APIC IRQ transform: (B6,I6,P0) -> 95 > > kernel: PCI->APIC IRQ transform: (B6,I7,P0) -> 92 > > kernel: PCI->APIC IRQ transform: (B6,I9,P0) -> 94 > > Can you enable APIC_DEBUG debugging in > "include/asm-i386/apic.h", and make > sure that you build the kernel with a big printk buffer. > Then, in case > your distribution comes with a broken "dmesg" binary that > doesn't show > more than about 20kB of data, compile this trivial program and run it > after bootup, and send the whole log out.. > > It would be a pity to have to boot with "noapic", since this > is exactly > the kind of situation where you _want_ the extra interrupts. > > Linus > > - stupid-dmesg.c - > #include > > int main(int argc, char **argv) > { > static char buffer[128*1024]; > int i; > > i = klogctl(3, buffer, sizeof(buffer)); > if (i > 0) > write(1, buffer, i); > } > > I enabled APIC_DEBUG, and here is the dmesg output. Thanks, Charlie <4>Linux version 2.4.22smp (root@dyn80-25.atd.ucar.edu) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #24 SMP Mon Nov 3 13:22:46 CST 2003 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000007ff75000 (usable) <4> BIOS-e820: 000000007ff75000 - 000000007ff77000 (ACPI NVS) <4> BIOS-e820: 000000007ff77000 - 000000007ff98000 (ACPI data) <4> BIOS-e820: 000000007ff98000 - 0000000080000000 (reserved) <4> BIOS-e820: 00000000fec00000 - 00000000fec90000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) <4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) <5>1151MB HIGHMEM available. <5>896MB LOWMEM available. <4>Scan SMP from c0000000 for 1024 bytes. <4>Scan SMP from c009fc00 for 1024 bytes. <4>Scan SMP from c00f0000 for 65536 bytes. <4>found SMP MP-table at 000fe710 <4>hm, page 000fe000 reserved twice. <4>hm, page 000ff000 reserved twice. <4>hm, page 000f0000 reserved twice. <4>On node 0 totalpages: 524149 <4>zone(0): 4096 pages. <4>zone(1): 225280 pages. <4>zone(2): 294773 pages. <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: DELL Product ID: WS 650 APIC at: 0xFEE00000 <4>Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 <4> Floating point unit present. <4> Machine Exception supported. <4> 64 bit compare & exchange supported. <4> Internal APIC present. <4> SEP present. <4> MTRR present. <4> PGE present. <4> MCA present. <4> CMOV present. <4> PAT present. <4> PSE present. <4> Cache Line Flush Instruction present. <4> Debug Trace and EMON Store present. <4> ACPI Thermal Throttle Registers present. <4> MMX present. <4> FXSR present. <4> XMM present. <4> Willamette New Instructions present. <4> Self Snoop present. <4> HT present. <4> Thermal Monitor present. <4> Bootup CPU <4>Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 <4> Floating point unit present. <4> Machine Exception supported. <4> 64 bit compare & exchange supported. <4> Internal APIC present. <4> SEP present. <4> MTRR present. <4> PGE present. <4> MCA present. <4> CMOV present. <4> PAT present. <4> PSE present. <4> Cache Line Flush Instruction present. <4> Debug Trace and EMON Store present. <4> ACPI Thermal Throttle Registers present. <4> MMX present. <4> FXSR present. <4> XMM present. <4> Willamette New Instructions present. <4> Self Snoop present. <4> HT present. <4> Thermal Monitor present. <4>Bus #0 is PCI <4>Bus #1 is PCI <4>Bus #2 is PCI <4>Bus #3 is PCI <4>Bus #4 is PCI <4>Bus #5 is PCI <4>Bus #6 is PCI <4>Bus #7 is PCI <4>Bus #8 is ISA <4>I/O APIC #8 Version 32 at 0xFEC00000. <4>I/O APIC #10 Version 32 at 0xFEC80000. <4>I/O APIC #9 Version 32 at 0xFEC80800. <4>Int: type 3, pol 1, trig 1, bus 8, IRQ 00, APIC ID 8, APIC INT 00 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 01, APIC ID 8, APIC INT 01 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 00, APIC ID 8, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 03, APIC ID 8, APIC INT 03 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 04, APIC ID 8, APIC INT 04 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 05, APIC ID 8, APIC INT 05 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 06, APIC ID 8, APIC INT 06 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 07, APIC ID 8, APIC INT 07 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 08, APIC ID 8, APIC INT 08 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 09, APIC ID 8, APIC INT 09 <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 0a, APIC ID 8, APIC INT 0a <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 0b, APIC ID 8, APIC INT 0b <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 0c, APIC ID 8, APIC INT 0c <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 0e, APIC ID 8, APIC INT 0e <4>Int: type 0, pol 0, trig 0, bus 8, IRQ 0f, APIC ID 8, APIC INT 0f <4>Int: type 0, pol 0, trig 0, bus 0, IRQ 74, APIC ID 8, APIC INT 10 <4>Int: type 0, pol 0, trig 0, bus 1, IRQ 00, APIC ID 8, APIC INT 10 <4>Int: type 0, pol 0, trig 0, bus 0, IRQ 7d, APIC ID 8, APIC INT 11 <4>Int: type 0, pol 0, trig 0, bus 1, IRQ 01, APIC ID 8, APIC INT 11 <4>Int: type 0, pol 0, trig 0, bus 0, IRQ 7c, APIC ID 8, APIC INT 12 <4>Int: type 0, pol 0, trig 0, bus 0, IRQ 76, APIC ID 8, APIC INT 12 <4>Int: type 0, pol 0, trig 0, bus 0, IRQ 75, APIC ID 8, APIC INT 13 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 30, APIC ID 8, APIC INT 14 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 37, APIC ID 8, APIC INT 14 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 3a, APIC ID 8, APIC INT 14 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 1c, APIC ID 0, APIC INT 14 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 34, APIC ID 8, APIC INT 15 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 3b, APIC ID 8, APIC INT 15 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 10, APIC ID 0, APIC INT 15 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 35, APIC ID 8, APIC INT 16 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 38, APIC ID 8, APIC INT 16 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 24, APIC ID 0, APIC INT 16 <4>Int: type 0, pol 0, trig 0, bus 0, IRQ 77, APIC ID 8, APIC INT 17 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 36, APIC ID 8, APIC INT 17 <4>Int: type 0, pol 0, trig 0, bus 7, IRQ 39, APIC ID 8, APIC INT 17 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 18, APIC ID 0, APIC INT 17 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 38, APIC ID a, APIC INT 00 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 1c, APIC ID 0, APIC INT 00 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 30, APIC ID a, APIC INT 01 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 10, APIC ID 0, APIC INT 01 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 31, APIC ID a, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 24, APIC ID 0, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 32, APIC ID a, APIC INT 03 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 18, APIC ID 0, APIC INT 03 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 33, APIC ID a, APIC INT 04 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 34, APIC ID a, APIC INT 05 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 35, APIC ID a, APIC INT 06 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 36, APIC ID a, APIC INT 07 <4>Int: type 0, pol 0, trig 0, bus 3, IRQ 37, APIC ID a, APIC INT 08 <4>Int: type 0, pol 0, trig 0, bus 4, IRQ 34, APIC ID 9, APIC INT 00 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 1c, APIC ID 0, APIC INT 00 <4>Int: type 0, pol 0, trig 0, bus 4, IRQ 35, APIC ID 9, APIC INT 01 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 10, APIC ID 0, APIC INT 01 <4>Int: type 0, pol 0, trig 0, bus 4, IRQ 38, APIC ID 9, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 4, IRQ 36, APIC ID 9, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 24, APIC ID 0, APIC INT 02 <4>Int: type 0, pol 0, trig 0, bus 4, IRQ 37, APIC ID 9, APIC INT 03 <4>Int: type 0, pol 0, trig 0, bus 6, IRQ 18, APIC ID 0, APIC INT 03 <4>Lint: type 3, pol 1, trig 1, bus 8, IRQ 00, APIC ID ff, APIC LINT 00 <4>Lint: type 1, pol 1, trig 1, bus 8, IRQ 00, APIC ID ff, APIC LINT 01 <4>Enabling APIC mode: Flat. Using 3 I/O APICs <4>Processors: 2 <4>Kernel command line: ro root=LABEL=/ apic <4>mapped APIC to ffffe000 (fee00000) <4>mapped IOAPIC to ffffd000 (fec00000) <4>mapped IOAPIC to ffffc000 (fec80000) <4>mapped IOAPIC to ffffb000 (fec80800) <6>Initializing CPU#0 <4>Detected 2392.343 MHz processor. <4>Console: colour VGA+ 80x25 <4>Calibrating delay loop... 4771.02 BogoMIPS <6>Memory: 2065960k/2096596k available (3174k kernel code, 30252k reserved, 1150k data, 392k init, 1179092k highmem) <6>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) <6>Mount cache hash table entries: 512 (order: 0, 4096 bytes) <6>Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) <4>Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 0 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09 <4>per-CPU timeslice cutoff: 1462.89 usecs. <4>Getting VERSION: 50014 <4>Getting VERSION: 50014 <4>Getting ID: 0 <4>Getting ID: f000000 <4>Getting LVT0: 700 <4>Getting LVT1: 400 <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000040 <4>ESR value after enabling vector: 00000000 <4>CPU present map: 41 <4>Booting processor 1/6 eip 2000 <4>Setting warm reset code and vector. <4>1. <4>2. <4>3. <4>Asserting INIT. <4>Waiting for send to finish... <4>+Deasserting INIT. <4>Waiting for send to finish... <4>+#startup loops: 2. <4>Sending STARTUP #1. <4>After apic_write. <6>Initializing CPU#1 <4>CPU#1 (phys ID: 6) waiting for CALLOUT <4>Startup point 1. <4>Waiting for send to finish... <4>+Sending STARTUP #2. <4>After apic_write. <4>Startup point 1. <4>Waiting for send to finish... <4>+After Startup. <4>Before Callout 1. <4>After Callout 1. <4>CALLIN, before setup_local_APIC(). <4>masked ExtINT on CPU#1 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <4>Calibrating delay loop... 4784.12 BogoMIPS <4>Stack at about f7ffbfb0 <6>CPU: Trace cache: 12K uops, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Physical Processor ID: 3 <6>Intel machine check reporting enabled on CPU#1. <7>CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 <7>CPU: Common caps: bfebfbff 00000000 00000000 00000000 <4>OK. <4>CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09 <4>CPU has booted. <4>Before bogomips. <6>Total of 2 processors activated (9555.14 BogoMIPS). <4>Before bogocount - setting activated=1. <4>Boot done. <4>WARNING: No sibling found for CPU 0. <4>WARNING: No sibling found for CPU 1. <4>ENABLING IO-APIC IRQs <4>Setting 8 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 8 ... ok. <4>Setting 10 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 10 ... ok. <4>Setting 9 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 9 ... ok. <4>Synchronizing Arb IDs. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 8-0, 8-13, 10-9, 10-10, 10-11, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17, 10-18, 10-19, 10-20, 10-21, 10-22, 10-23, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, 9-12, 9-13, 9-14, 9-15, 9-16, 9-17, 9-18, 9-19, 9-20, 9-21, 9-22, 9-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 58. <7>number of IO-APIC #8 registers: 24. <7>number of IO-APIC #10 registers: 24. <7>number of IO-APIC #9 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #8...... <7>.... register #00: 08000000 <7>....... : physical APIC id: 08 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00000000 <7>....... : arbitration: 00 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 0 0 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 0 0 0 0 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 003 03 0 0 0 0 0 1 1 91 <7> 0f 003 03 0 0 0 0 0 1 1 99 <7> 10 003 03 1 1 0 1 0 1 1 A1 <7> 11 003 03 1 1 0 1 0 1 1 A9 <7> 12 003 03 1 1 0 1 0 1 1 B1 <7> 13 003 03 1 1 0 1 0 1 1 B9 <7> 14 003 03 1 1 0 1 0 1 1 C1 <7> 15 003 03 1 1 0 1 0 1 1 C9 <7> 16 003 03 1 1 0 1 0 1 1 D1 <7> 17 003 03 1 1 0 1 0 1 1 D9 <4> <7>IO APIC #10...... <7>.... register #00: 0A000000 <7>....... : physical APIC id: 0A <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 0A000000 <7>....... : arbitration: 0A <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 003 03 1 1 0 1 0 1 1 E1 <7> 01 003 03 1 1 0 1 0 1 1 E9 <7> 02 003 03 1 1 0 1 0 1 1 32 <7> 03 003 03 1 1 0 1 0 1 1 3A <7> 04 003 03 1 1 0 1 0 1 1 42 <7> 05 003 03 1 1 0 1 0 1 1 4A <7> 06 003 03 1 1 0 1 0 1 1 52 <7> 07 003 03 1 1 0 1 0 1 1 5A <7> 08 003 03 1 1 0 1 0 1 1 62 <7> 09 000 00 1 0 0 0 0 0 0 00 <7> 0a 000 00 1 0 0 0 0 0 0 00 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 000 00 1 0 0 0 0 0 0 00 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 000 00 1 0 0 0 0 0 0 00 <7> 0f 000 00 1 0 0 0 0 0 0 00 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <4> <7>IO APIC #9...... <7>.... register #00: 09000000 <7>....... : physical APIC id: 09 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 09000000 <7>....... : arbitration: 09 <7>.... register #03: 00000001 <7>....... : Boot DT : 1 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 003 03 1 1 0 1 0 1 1 6A <7> 01 003 03 1 1 0 1 0 1 1 72 <7> 02 003 03 1 1 0 1 0 1 1 7A <7> 03 003 03 1 1 0 1 0 1 1 82 <7> 04 000 00 1 0 0 0 0 0 0 00 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 000 00 1 0 0 0 0 0 0 00 <7> 07 000 00 1 0 0 0 0 0 0 00 <7> 08 000 00 1 0 0 0 0 0 0 00 <7> 09 000 00 1 0 0 0 0 0 0 00 <7> 0a 000 00 1 0 0 0 0 0 0 00 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 000 00 1 0 0 0 0 0 0 00 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 000 00 1 0 0 0 0 0 0 00 <7> 0f 000 00 1 0 0 0 0 0 0 00 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <7>IRQ16 -> 0:16 <7>IRQ17 -> 0:17 <7>IRQ18 -> 0:18 <7>IRQ19 -> 0:19 <7>IRQ20 -> 0:20 <7>IRQ21 -> 0:21 <7>IRQ22 -> 0:22 <7>IRQ23 -> 0:23 <7>IRQ24 -> 1:0 <7>IRQ25 -> 1:1 <7>IRQ26 -> 1:2 <7>IRQ27 -> 1:3 <7>IRQ28 -> 1:4 <7>IRQ29 -> 1:5 <7>IRQ30 -> 1:6 <7>IRQ31 -> 1:7 <7>IRQ32 -> 1:8 <7>IRQ48 -> 2:0 <7>IRQ49 -> 2:1 <7>IRQ50 -> 2:2 <7>IRQ51 -> 2:3 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 2392.2463 MHz. <4>..... host bus clock speed is 132.9025 MHz. <4>cpu: 0, clocks: 1329025, slice: 443008 <4>CPU0 <4>cpu: 1, clocks: 1329025, slice: 443008 <4>CPU1 <4>checking TSC synchronization across CPUs: passed. <4>Setting commenced=1, go go go <4>Waiting on wait_init_idle (map = 0x2) <4>All processors have done init_idle <6>PCI: PCI BIOS revision 2.10 entry at 0xfbdd5, last bus=7 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <6>PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0 <4>querying PCI -> IRQ mapping bus:0, slot:29, pin:0. <6>PCI->APIC IRQ transform: (B0,I29,P0) -> 16 <4>querying PCI -> IRQ mapping bus:0, slot:29, pin:1. <6>PCI->APIC IRQ transform: (B0,I29,P1) -> 19 <4>querying PCI -> IRQ mapping bus:0, slot:29, pin:2. <6>PCI->APIC IRQ transform: (B0,I29,P2) -> 18 <4>querying PCI -> IRQ mapping bus:0, slot:29, pin:3. <6>PCI->APIC IRQ transform: (B0,I29,P3) -> 23 <4>querying PCI -> IRQ mapping bus:0, slot:31, pin:0. <6>PCI->APIC IRQ transform: (B0,I31,P0) -> 18 <4>querying PCI -> IRQ mapping bus:0, slot:31, pin:1. <6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17 <4>querying PCI -> IRQ mapping bus:0, slot:31, pin:1. <6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17 <4>querying PCI -> IRQ mapping bus:1, slot:0, pin:0. <6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16 <4>querying PCI -> IRQ mapping bus:3, slot:12, pin:0. <6>PCI->APIC IRQ transform: (B3,I12,P0) -> 25 <4>querying PCI -> IRQ mapping bus:3, slot:12, pin:1. <6>PCI->APIC IRQ transform: (B3,I12,P1) -> 26 <4>querying PCI -> IRQ mapping bus:3, slot:14, pin:0. <6>PCI->APIC IRQ transform: (B3,I14,P0) -> 24 <4>querying PCI -> IRQ mapping bus:4, slot:14, pin:0. <6>PCI->APIC IRQ transform: (B4,I14,P0) -> 50 <4>querying PCI -> IRQ mapping bus:6, slot:4, pin:0. <6>PCI->APIC IRQ transform: (B6,I4,P0) -> 93 <4>querying PCI -> IRQ mapping bus:6, slot:6, pin:0. <6>PCI->APIC IRQ transform: (B6,I6,P0) -> 95 <4>querying PCI -> IRQ mapping bus:6, slot:7, pin:0. <6>PCI->APIC IRQ transform: (B6,I7,P0) -> 92 <4>querying PCI -> IRQ mapping bus:6, slot:9, pin:0. <6>PCI->APIC IRQ transform: (B6,I9,P0) -> 94 <4>querying PCI -> IRQ mapping bus:7, slot:12, pin:0. <6>PCI->APIC IRQ transform: (B7,I12,P0) -> 20 <6>isapnp: Scanning for PnP cards... <6>isapnp: No Plug & Play device found <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>IA-32 Microcode Update Driver: v1.11 <4>Starting kswapd <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <6>Journalled Block Device driver loaded <6>Installing knfsd (copyright (C) 1996 okir@monad.swb.de). <6>i2c-core.o: i2c core module <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>0 3c515 cards found. <4>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>Intel(R) PRO/1000 Network Driver - version 5.1.13-k1 <6>Copyright (c) 1999-2003 Intel Corporation. <6>eth0: Intel(R) PRO/1000 Network Connection <6>Linux agpgart interface v0.99 (c) Jeff Hartmann <6>agpgart: Maximum main memory to use for agp memory: 1919M <3>agpgart: Unsupported Intel chipset (device id: 2550), you might want to try agp_try_unsupported=1. <7>agpgart: no supported devices found. <6>[drm] Initialized tdfx 1.0.0 20010216 on minor 0 <6>[drm] Initialized radeon 1.1.1 20010405 on minor 1 <3>[drm:drm_init] *ERROR* Cannot initialize the agpgart module. <6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>ICH4: IDE controller at PCI slot 00:1f.1 <4>PCI: Enabling device 00:1f.1 (0005 -> 0007) <6>ICH4: chipset revision 1 <6>ICH4: not 100% native mode: will probe irqs later <6> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio <4>hdc: Lite-On LTN486S 48x Max, ATAPI CD/DVD-ROM drive <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hdc: attached ide-cdrom driver. <6>hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33) <6>Uniform CD-ROM driver Revision: 3.12 <6>SCSI subsystem driver Revision: 1.00 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <3>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 <6>Fusion MPT base driver 2.05.05+ <6>Copyright (c) 1999-2002 LSI Logic Corporation <6>mptbase: Initiating ioc0 bringup <6>ioc0: 53C1030: Capabilities={Initiator} <6>mptbase: Initiating ioc1 bringup <6>ioc1: 53C1030: Capabilities={Initiator} <6>mptbase: Initiating ioc2 bringup <6>ioc2: 53C1030: Capabilities={Initiator} <6>mptbase: 3 MPT adapters found, 3 installed. <6>Fusion MPT SCSI Host driver 2.05.05+ <6>scsi0 : ioc0: LSI53C1030, FwRev=01011800h, Ports=1, MaxQ=222, IRQ=25 <6>scsi1 : ioc1: LSI53C1030, FwRev=01011800h, Ports=1, MaxQ=222, IRQ=26 <6>scsi2 : ioc2: LSI53C1030, FwRev=01011800h, Ports=1, MaxQ=222, IRQ=50 <4>blk: queue c28d741c, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LW Rev: DS08 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue c29d461c, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LW Rev: DS08 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue c29d401c, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <4> Vendor: SEAGATE Model: ST3146807LW Rev: DS08 <4> Type: Direct-Access ANSI SCSI revision: 03 <4>blk: queue c29baa1c, I/O limit 4294967295Mb (mask 0xffffffffffffffff) <6>mptscsih: ioc2: scsi2: Id=0 Lun=0: Queue depth=31 <6>mptscsih: ioc2: scsi2: Id=1 Lun=0: Queue depth=31 <6>mptscsih: ioc2: scsi2: Id=2 Lun=0: Queue depth=31 <4>Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 <4>Attached scsi disk sdb at scsi2, channel 0, id 1, lun 0 <4>Attached scsi disk sdc at scsi2, channel 0, id 2, lun 0 <4>SCSI device sda: 286749480 512-byte hdwr sectors (146816 MB) <6>Partition check: <6> sda: sda1 sda2 sda3 sda4 < sda5 sda6 > <4>SCSI device sdb: 286749480 512-byte hdwr sectors (146816 MB) <6> sdb: unknown partition table <4>SCSI device sdc: 286749480 512-byte hdwr sectors (146816 MB) <6> sdc: unknown partition table <6>ohci1394: $Rev: 1010 $ Ben Collins <6>ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fd1ff800-fd1fffff] Max Packet=[2048] <6>video1394: Installed video1394 module <6>raw1394: /dev/raw1394 device initialized <6>sbp2: $Rev: 1010 $ Ben Collins <6>es1371: version v0.32 time 12:56:23 Nov 3 2003 <6>usb.c: registered new driver usbdevfs <6>usb.c: registered new driver hub <7>PCI: Setting latency timer of device 00:1d.7 to 64 <6>ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 <6>ehci_hcd 00:1d.7: irq 23, pci mem f8829800 <6>usb.c: new USB bus registered, assigned bus number 1 <6>ehci_hcd 00:1d.7: enabled 64bit PCI DMA <4>PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW. <4>PCI: 00:1d.7 PCI cache line size corrected to 32. <6>ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 <6>hub.c: USB hub found <6>hub.c: 6 ports detected <7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[83ffffffffffff00] <6>host/uhci.c: USB Universal Host Controller Interface driver v1.1 <7>PCI: Setting latency timer of device 00:1d.0 to 64 <6>host/uhci.c: USB UHCI at I/O 0xff80, IRQ 16 <6>usb.c: new USB bus registered, assigned bus number 2 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <7>PCI: Setting latency timer of device 00:1d.1 to 64 <6>host/uhci.c: USB UHCI at I/O 0xff60, IRQ 19 <6>usb.c: new USB bus registered, assigned bus number 3 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <7>PCI: Setting latency timer of device 00:1d.2 to 64 <6>host/uhci.c: USB UHCI at I/O 0xff40, IRQ 18 <6>usb.c: new USB bus registered, assigned bus number 4 <6>hub.c: USB hub found <6>hub.c: 2 ports detected <6>usb.c: registered new driver hiddev <6>usb.c: registered new driver hid <6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <6>hid-core.c: USB HID support drivers <6>usb.c: registered new driver usblp <6>printer.c: v0.11: USB Printer Device Class driver <6>bluetooth.c: USB Bluetooth support registered <6>usb.c: registered new driver bluetty <6>bluetooth.c: USB Bluetooth tty driver v0.13 <6>usb.c: registered new driver serial <6>usbserial.c: USB Serial support registered for Generic <6>usbserial.c: USB Serial Driver core v1.4 <6>usbserial.c: USB Serial support registered for Handspring Visor / Treo / Palm 4.0 / Cli? 4.x <6>usbserial.c: USB Serial support registered for Sony Cli? 3.5 <6>visor.c: USB HandSpring Visor, Palm m50x, Treo, Sony Cli? driver v1.7 <6>ipaq.c: USB PocketPC PDA driver v0.5 <6>usbserial.c: USB Serial support registered for PocketPC PDA <6>usbserial.c: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) <6>usbserial.c: USB Serial support registered for Connect Tech - WhiteHEAT <6>whiteheat.c: USB ConnectTech WhiteHEAT driver v1.2 <7>ftdi_sio.c: ftdi_init <6>usbserial.c: USB Serial support registered for FTDI SIO <6>usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible <6>usbserial.c: USB Serial support registered for FTDI FT232BM Compatible <6>usbserial.c: USB Serial support registered for USB-UIRT Infrared Receiver/Transmitter <6>usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver <6>ftdi_sio.c: v1.3.4:USB FTDI Serial Converters Driver <6>usbserial.c: USB Serial support registered for Keyspan PDA <6>usbserial.c: USB Serial support registered for Keyspan PDA - (prerenumeration) <6>usbserial.c: USB Serial support registered for Xircom / Entregra PGS - (prerenumeration) <6>keyspan_pda.c: USB Keyspan PDA Converter driver v1.1 <6>usbserial.c: USB Serial support registered for Keyspan - (without firmware) <6>usbserial.c: USB Serial support registered for Keyspan 1 port adapter <6>usbserial.c: USB Serial support registered for Keyspan 2 port adapter <6>usbserial.c: USB Serial support registered for Keyspan 4 port adapter <6>keyspan.c: v1.1.4:Keyspan USB to Serial Converter Driver <6>usbserial.c: USB Serial support registered for ZyXEL - omni.net lcd plus usb <6>omninet.c: v1.1:USB ZyXEL omni.net LCD PLUS Driver <6>usbserial.c: USB Serial support registered for Digi USB <6>usbserial.c: USB Serial support registered for Digi USB <6>digi_acceleport.c: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver <6>usbserial.c: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter <6>belkin_sa.c: USB Belkin Serial converter driver v1.2 <6>usbserial.c: USB Serial support registered for Empeg <6>empeg.c: v1.2:USB Empeg Mark I/II Driver <6>usbserial.c: USB Serial support registered for Magic Control Technology USB-RS232 <6>mct_u232.c: Magic Control Technology USB-RS232 converter driver v1.1 <6>usbserial.c: USB Serial support registered for Edgeport 1 port adapter <6>usbserial.c: USB Serial support registered for Edgeport 2 port adapter <6>usbserial.c: USB Serial support registered for Edgeport 4 port adapter <6>usbserial.c: USB Serial support registered for Edgeport 8 port adapter <6>io_edgeport.c: Edgeport USB Serial Driver v2.3 <6>usbserial.c: USB Serial support registered for Edgeport TI 1 port adapter <6>usbserial.c: USB Serial support registered for Edgeport TI 2 port adapter <6>io_ti.c: Edgeport USB Serial Driver v0.2 <6>usbserial.c: USB Serial support registered for PL-2303 <6>pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.9 <6>usbserial.c: USB Serial support registered for Reiner SCT Cyberjack USB card reader <6>cyberjack.c: v1.0 Matthias Bruestle <6>cyberjack.c: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver <6>usbserial.c: USB Serial support registered for IR Dongle <6>ir-usb.c: USB IR Dongle driver v0.4 <6>usbserial.c: USB Serial support registered for KL5KUSB105D / PalmConnect <6>kl5kusb105.c: KLSI KL5KUSB105 chipset USB->Serial Converter driver v0.3a <6>usbserial.c: USB Serial support registered for KOBIL USB smart card terminal <6>kobil_sct.c: 12/03/2002 KOBIL Systems GmbH - http://www.kobil.com <6>kobil_sct.c: KOBIL USB Smart Card Terminal Driver (experimental) <6>Initializing USB Mass Storage driver... <6>usb.c: registered new driver usb-storage <6>USB Mass Storage support registered. <6>mice: PS/2 mouse device common for all mice <6>md: linear personality registered as nr 1 <6>md: raid0 personality registered as nr 2 <6>md: raid1 personality registered as nr 3 <6>md: raid5 personality registered as nr 4 <6>raid5: measuring checksumming speed <4> 8regs : 2767.200 MB/sec <4> 32regs : 1710.800 MB/sec <4> pIII_sse : 3091.200 MB/sec <4> pII_mmx : 2801.200 MB/sec <4> p5_mmx : 2780.000 MB/sec <4>raid5: using function: pIII_sse (3091.200 MB/sec) <6>md: multipath personality registered as nr 7 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>LVM version 1.0.5+(22/07/2002) <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <6>IP: routing cache hash table of 8192 buckets, 128Kbytes <6>TCP: Hash tables configured (established 131072 bind 43690) <6>IPv4 over IPv4 tunneling driver <6>GRE over IPv4 tunneling driver <6>Linux IP multicast router 0.06 plus PIM-SM <4>ip_conntrack version 2.1 (8192 buckets, 65536 max) - 292 bytes per conntrack <4>ip_tables: (C) 2000-2002 Netfilter core team <6>ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ <4>arp_tables: (C) 2002 David S. Miller <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <6>NET4: Linux IPX 0.47 for NET4.0 <6>IPX Portions Copyright (c) 1995 Caldera, Inc. <6>IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc. <5>RAMDISK: Compressed image found at block 0 <6>Freeing initrd memory: 223k freed <4>VFS: Mounted root (ext2 filesystem). <6>kjournald starting. Commit interval 5 seconds <6>EXT3-fs: mounted filesystem with ordered data mode. <6>Freeing unused kernel memory: 392k freed <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal <6>Adding Swap: 2040212k swap-space (priority -1) <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,3), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>kjournald starting. Commit interval 5 seconds <6>EXT3 FS 2.4-0.9.19, 19 August 2002 on lvm(58,0), internal journal <6>EXT3-fs: mounted filesystem with ordered data mode. <6>hdc: DMA disabled <3>microcode: CPU0 no microcode found! (sig=f29, pflags=2) <3>microcode: CPU1 no microcode found! (sig=f29, pflags=2) <4>i2c-core.o: adapter Smbus i8254x at 03:0e.0 Int registered as adapter 0. <4>i2c-core.o: adapter Smbus i8254x at 03:0e.0 Ext registered as adapter 1. <4>Loading i8254x SMBus driver. Version 3.0.9 <6>e1000: eth0 NIC Link is Up 100 Mbps Full Duplex <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <7>usbserial.c: serial_open <4>calling pci_register_driver <4>entering piraqProbe <4>current number of piraqs: 0 <4>before pci_enable_device <4>Piraq 1 located at bus 6, device/function 0x20 <4> pci configuration space: <4> <4> 0x00: e8 10 20 59 03 01 80 02 00 00 00 09 00 00 00 00 <4> 0x10: 81 dc 00 00 00 00 ae fd 00 fc ad fd 00 f8 ad fd <4> 0x20: 00 00 a0 fd 00 00 00 00 00 00 00 00 00 00 00 00 <4> 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 <4> silicon version 0 <4> interrupt line 9 <4> interrupt pin 1 <4> irq 93 <4> Base address[0]: I/O 0x0000dc80 0x00000080 128 <4> Base address[1]: MEM 0xfdae0000 0x00020000 131072 <4> Base address[2]: MEM 0xfdadfc00 0x00000040 64 <4> Base address[3]: MEM 0xfdadf800 0x00000010 16 <4> Base address[4]: MEM 0xfda00000 0x00080000 524288 <4> Base address[5]: 0x00000000 0x00000000 0 <4>piraq count now at 1 <4>entering piraqProbe <4>current number of piraqs: 1 <4>before pci_enable_device <4>Piraq 2 located at bus 6, device/function 0x30 <4> pci configuration space: <4> <4> 0x00: e8 10 20 59 03 01 80 02 00 00 00 09 00 00 00 00 <4> 0x10: 01 dc 00 00 00 00 aa fd 00 f4 ad fd 00 f0 ad fd <4> 0x20: 00 00 98 fd 00 00 00 00 00 00 00 00 00 00 00 00 <4> 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 <4> silicon version 0 <4> interrupt line 9 <4> interrupt pin 1 <4> irq 95 <4> Base address[0]: I/O 0x0000dc00 0x00000080 128 <4> Base address[1]: MEM 0xfdaa0000 0x00020000 131072 <4> Base address[2]: MEM 0xfdadf400 0x00000040 64 <4> Base address[3]: MEM 0xfdadf000 0x00000010 16 <4> Base address[4]: MEM 0xfd980000 0x00080000 524288 <4> Base address[5]: 0x00000000 0x00000000 0 <4>piraq count now at 2 <4>entering piraqProbe <4>current number of piraqs: 2 <4>before pci_enable_device <4>Piraq 3 located at bus 6, device/function 0x38 <4> pci configuration space: <4> <4> 0x00: e8 10 20 59 03 01 80 02 00 00 00 09 00 00 00 00 <4> 0x10: 81 d8 00 00 00 00 a8 fd 00 ec ad fd 00 e8 ad fd <4> 0x20: 00 00 90 fd 00 00 00 00 00 00 00 00 00 00 00 00 <4> 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 <4> silicon version 0 <4> interrupt line 9 <4> interrupt pin 1 <4> irq 92 <4> Base address[0]: I/O 0x0000d880 0x00000080 128 <4> Base address[1]: MEM 0xfda80000 0x00020000 131072 <4> Base address[2]: MEM 0xfdadec00 0x00000040 64 <4> Base address[3]: MEM 0xfdade800 0x00000010 16 <4> Base address[4]: MEM 0xfd900000 0x00080000 524288 <4> Base address[5]: 0x00000000 0x00000000 0 <4>piraq count now at 3 <4>entering piraqProbe <4>current number of piraqs: 3 <4>before pci_enable_device <4>Piraq 4 located at bus 6, device/function 0x48 <4> pci configuration space: <4> <4> 0x00: e8 10 20 59 03 01 80 02 00 00 00 09 00 00 00 00 <4> 0x10: 01 d8 00 00 00 00 8e fd 00 e4 ad fd 00 e0 ad fd <4> 0x20: 00 00 80 fd 00 00 00 00 00 00 00 00 00 00 00 00 <4> 0x30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 00 00 <4> silicon version 0 <4> interrupt line 9 <4> interrupt pin 1 <4> irq 94 <4> Base address[0]: I/O 0x0000d800 0x00000080 128 <4> Base address[1]: MEM 0xfd8e0000 0x00020000 131072 <4> Base address[2]: MEM 0xfdade400 0x00000040 64 <4> Base address[3]: MEM 0xfdade000 0x00000010 16 <4> Base address[4]: MEM 0xfd800000 0x00080000 524288 <4> Base address[5]: 0x00000000 0x00000000 0 <4>piraq count now at 4 <4>after pci_register_driver <4>initializing state for board 0, dsp 0 <4>initializing state for board 0, dsp 1 <4>initializing state for board 1, dsp 0 <4>initializing state for board 1, dsp 1 <4>initializing state for board 2, dsp 0 <4>initializing state for board 2, dsp 1 <4>initializing state for board 3, dsp 0 <4>initializing state for board 3, dsp 1 <4>allocating memory for piraq 0, dsp 0 <4>allocating memory for piraq 0, dsp 1 <4>allocating memory for piraq 1, dsp 0 <4>allocating memory for piraq 1, dsp 1 <4>allocating memory for piraq 2, dsp 0 <4>allocating memory for piraq 2, dsp 1 <4>allocating memory for piraq 3, dsp 0 <4>allocating memory for piraq 3, dsp 1 <4>piraq debugging at after allocateMemory <4>calling piraqPciSetup <4>piraq debugging at entering piraqPciSetup <4>piraq debugging at -------------------------------------------- <4>piraq debugging at getting pci resources for next piraq <4>piraq debugging at remapping memory areas <4> wave remapped from 0xfda00000 to 0xfad21000 <4> dsp dpr remapped from 0xfdae0000 to 0xfada2000 <4> dsp0 pDprComm is 0xfada2100 <4> dsp0 intPending is 0xfada2100 <4> dsp1 pDprComm is 0xfadb2100 <4> dsp1 intPending is 0xfadb2100 <4> status remapped to 0xfad1f800 <4> counter remapped to 0xfadc3c00 <4> addint clear is 0xfadc3c20 <4> mailbox size(words) 0x00002805 <4> free dpr begins at 0x00002845 <4> free dpr len(words) 0x000017bb <4>piraq debugging at calling piraq_boardReset <4>dsp 0a counters set to zero <4>dsp 0b counters set to zero <4>piraq debugging at after piraq_boardReset <4>piraq debugging at -------------------------------------------- <4>piraq debugging at getting pci resources for next piraq <4>piraq debugging at remapping memory areas <4> wave remapped from 0xfd980000 to 0xfadc7000 <4> dsp dpr remapped from 0xfdaa0000 to 0xfae48000 <4> dsp0 pDprComm is 0xfae48100 <4> dsp0 intPending is 0xfae48100 <4> dsp1 pDprComm is 0xfae58100 <4> dsp1 intPending is 0xfae58100 <4> status remapped to 0xfadc5000 <4> counter remapped to 0xfae69400 <4> addint clear is 0xfae69420 <4> mailbox size(words) 0x00002805 <4> free dpr begins at 0x00002845 <4> free dpr len(words) 0x000017bb <4>piraq debugging at calling piraq_boardReset <4>dsp 1a counters set to zero <4>dsp 1b counters set to zero <4>piraq debugging at after piraq_boardReset <4>piraq debugging at -------------------------------------------- <4>piraq debugging at getting pci resources for next piraq <4>piraq debugging at remapping memory areas <4> wave remapped from 0xfd900000 to 0xfae6d000 <4> dsp dpr remapped from 0xfda80000 to 0xfaeee000 <4> dsp0 pDprComm is 0xfaeee100 <4> dsp0 intPending is 0xfaeee100 <4> dsp1 pDprComm is 0xfaefe100 <4> dsp1 intPending is 0xfaefe100 <4> status remapped to 0xfae6b800 <4> counter remapped to 0xfaf0fc00 <4> addint clear is 0xfaf0fc20 <4> mailbox size(words) 0x00002805 <4> free dpr begins at 0x00002845 <4> free dpr len(words) 0x000017bb <4>piraq debugging at calling piraq_boardReset <4>dsp 2a counters set to zero <4>dsp 2b counters set to zero <4>piraq debugging at after piraq_boardReset <4>piraq debugging at -------------------------------------------- <4>piraq debugging at getting pci resources for next piraq <4>piraq debugging at remapping memory areas <4> wave remapped from 0xfd800000 to 0xfaf13000 <4> dsp dpr remapped from 0xfd8e0000 to 0xfaf94000 <4> dsp0 pDprComm is 0xfaf94100 <4> dsp0 intPending is 0xfaf94100 <4> dsp1 pDprComm is 0xfafa4100 <4> dsp1 intPending is 0xfafa4100 <4> status remapped to 0xfaf11000 <4> counter remapped to 0xfafb5400 <4> addint clear is 0xfafb5420 <4> mailbox size(words) 0x00002805 <4> free dpr begins at 0x00002845 <4> free dpr len(words) 0x000017bb <4>piraq debugging at calling piraq_boardReset <4>dsp 3a counters set to zero <4>dsp 3b counters set to zero <4>piraq debugging at after piraq_boardReset <4>piraq debugging at leaving pciSetup <4>piraq debugging at after piraqPciSetup <4>piraq debugging at requesting interrupt <4> irq 93 registered for piraq #0 <4> irq 95 registered for piraq #1 <4> irq 92 registered for piraq #2 <4> irq 94 registered for piraq #3 <4>piraq debugging at calling register_chrdev for piraq <4>piraq debugging at calling register_chrdev for dsp <4>piraq debugging at calling procfs_init <4>piraq registration succesful for 4 cards - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/