Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <1535096165-45827-1-git-send-email-hanjie.lin@amlogic.com>
 <1535096165-45827-2-git-send-email-hanjie.lin@amlogic.com>
 <8c48964151d24758298ba935da336c0829e2b287.camel@baylibre.com>
 <11d7547b-feb4-6ecb-cef3-db46ce8ee2ef@amlogic.com> <20180829004122.GA25928@bogus>
 <84d5399c-67d4-f8a4-3613-00d91f21292f@amlogic.com>
In-Reply-To: <84d5399c-67d4-f8a4-3613-00d91f21292f@amlogic.com>
From:   Rob Herring <robh@kernel.org>
Date:   Thu, 30 Aug 2018 08:59:19 -0500
Message-ID: <CAL_JsqJPzfp1OimYXa26tEqTexyiuKMeKszveobHN3rKP8+RYQ@mail.gmail.com>
Subject: Re: [PATCH v2 1/2] dt-bindings: PCI: meson: add DT bindings for
 Amlogic Meson PCIe controller
To:     Hanjie Lin <hanjie.lin@amlogic.com>
Cc:     Jerome Brunet <jbrunet@baylibre.com>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Yue Wang <yue.wang@amlogic.com>,
        Kevin Hilman <khilman@baylibre.com>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        linux-pci@vger.kernel.org,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@lists.infradead.org>,
        linux-amlogic@lists.infradead.org,
        Yixun Lan <yixun.lan@amlogic.com>,
        Liang Yang <liang.yang@amlogic.com>,
        Jianxin Pan <jianxin.pan@amlogic.com>,
        Qiufang Dai <qiufang.dai@amlogic.com>,
        Jian Hu <jian.hu@amlogic.com>, devicetree@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, Aug 30, 2018 at 2:37 AM Hanjie Lin <hanjie.lin@amlogic.com> wrote:
>
>
>
> On 2018/8/29 8:41, Rob Herring wrote:
> > On Mon, Aug 27, 2018 at 04:55:20PM +0800, Hanjie Lin wrote:
> >>
> >>
> >> On 2018/8/24 16:22, Jerome Brunet wrote:
> >>> On Fri, 2018-08-24 at 15:36 +0800, Hanjie Lin wrote:
> >>>> From: Yue Wang <yue.wang@amlogic.com>
> >>>>
> >>>> The Amlogic Meson PCIe host controller is based on the Synopsys DesignWare
> >>>> PCI core. This patch adds documentation for the DT bindings in Meson PCIe
> >>>> controller.
> >>>>
> >>>> Signed-off-by: Yue Wang <yue.wang@amlogic.com>
> >>>> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
> >>>> ---
> >>>>  .../devicetree/bindings/pci/amlogic,meson-pcie.txt | 63 ++++++++++++++++++++++
> >>>>  1 file changed, 63 insertions(+)
> >>>>  create mode 100644 Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> >>>> new file mode 100644
> >>>> index 0000000..8a831d1
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/pci/amlogic,meson-pcie.txt
> >>>> @@ -0,0 +1,63 @@
> >>>> +Amlogic Meson AXG DWC PCIE SoC controller
> >>>> +
> >>>> +Amlogic Meson PCIe host controller is based on the Synopsys DesignWare PCI core.
> >>>> +It shares common functions with the PCIe DesignWare core driver and
> >>>> +inherits common properties defined in
> >>>> +Documentation/devicetree/bindings/pci/designware-pci.txt.
> >>>> +
> >>>> +Additional properties are described here:
> >>>> +
> >>>> +Required properties:
> >>>> +- compatible:
> >>>> +  should contain "amlogic,axg-pcie" to identify the core.
> >>>> +- reg:
> >>>> +  Should contain the configuration address space.
> >>>> +- reg-names: Must be
> >>>> +  - "elbi"        External local bus interface registers
> >>>> +  - "cfg"         Meson specific registers
> >>>> +  - "config"      PCIe configuration space
> >>>> +- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
> >>>> +- clocks: Must contain an entry for each entry in clock-names.
> >>>> +- clock-names: Must include the following entries:
> >>>> +  - "pclk"       PCIe GEN 100M PLL clock
> >>>> +  - "port"       PCIe_x(A or B) RC clock gate
> >>>> +  - "general"    PCIe Phy clock
> >>>> +  - "mipi"       PCIe_x(A or B) 100M ref clock gate
> >>>> +- resets: phandle to the reset lines.
> >>>> +- reset-names: must contain "phy" and "peripheral"
> >>>> +       - "port" Port A or B reset
> >>>> +       - "apb" APB reset
> >>>
> >>> The above description is not coherent (phy <=> port)
> >>>
> >>
> >> Yes, this should be port and apb here.
> >> We'll integrate phy driver into ctrl driver, and move phy reset to here also.
> >
> > Why? That's the wrong thing to do if they are separate h/w blocks. You
> > can do whatever you like in the drivers, but the DT should reflect the
> > h/w.
> >
> > Rob
> >
> > .
> >
>
> We have the dedicated phy driver which only process reset job,
> and we consider that it's too overkill to do just these things .
> So we will integrate phy reset job into the controller driver int the next version.

What's in the separate register space you had for the phy?

Rob