Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Alexandre Belloni <alexandre.belloni@bootlin.com>
To:     Wolfram Sang <wsa@the-dreams.de>,
        Jarkko Nikula <jarkko.nikula@linux.intel.com>,
        James Hogan <jhogan@kernel.org>,
        Paul Burton <paul.burton@mips.com>
Cc:     Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Mika Westerberg <mika.westerberg@linux.intel.com>,
        linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-mips@linux-mips.org,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Allan Nielsen <allan.nielsen@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v5 1/7] i2c: designware: use generic table matching
Date:   Fri, 31 Aug 2018 17:11:08 +0200
Message-Id: <20180831151114.25739-2-alexandre.belloni@bootlin.com>
In-Reply-To: <20180831151114.25739-1-alexandre.belloni@bootlin.com>
References: <20180831151114.25739-1-alexandre.belloni@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Switch to device_get_match_data in probe to match the device specific data
instead of using the acpi specific function.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
 drivers/i2c/busses/i2c-designware-platdrv.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 1a8d2da5b000..72f403e75fa6 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -86,7 +86,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	struct i2c_timings *t = &dev->timings;
 	u32 ss_ht = 0, fp_ht = 0, hs_ht = 0, fs_ht = 0;
 	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
-	const struct acpi_device_id *id;
 	struct acpi_device *adev;
 	const char *uid;
 
@@ -119,10 +118,6 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 		break;
 	}
 
-	id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
-	if (id && id->driver_data)
-		dev->flags |= (u32)id->driver_data;
-
 	if (acpi_bus_get_device(handle, &adev))
 		return -ENODEV;
 
@@ -291,6 +286,8 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	else
 		t->bus_freq_hz = 400000;
 
+	dev->flags |= (uintptr_t)device_get_match_data(&pdev->dev);
+
 	if (has_acpi_companion(&pdev->dev))
 		dw_i2c_acpi_configure(pdev);
 
-- 
2.19.0.rc1