Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263339AbTKFENR (ORCPT ); Wed, 5 Nov 2003 23:13:17 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263343AbTKFENQ (ORCPT ); Wed, 5 Nov 2003 23:13:16 -0500 Received: from astound-64-85-224-253.ca.astound.net ([64.85.224.253]:7430 "EHLO master.linux-ide.org") by vger.kernel.org with ESMTP id S263339AbTKFENN (ORCPT ); Wed, 5 Nov 2003 23:13:13 -0500 Date: Wed, 5 Nov 2003 20:11:48 -0800 (PST) From: Andre Hedrick To: Steven Adams cc: linux-kernel@vger.kernel.org Subject: Re: no DRQ after issuing WRITE In-Reply-To: <01ba01c3a3f7$1da22100$dfb21ad3@drifthost> Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2577 Lines: 77 It means DMA got disabled! It also means improper exit from the FSM. Andre Hedrick LAD Storage Consulting Group On Thu, 6 Nov 2003, Steven Adams wrote: > anyone? > ----- Original Message ----- > From: > To: > Sent: Wednesday, November 05, 2003 2:05 PM > Subject: hda: no DRQ after issuing WRITE > > > > Hey guys, > > > > i keep getting things like this in my dmesg > > > > ============================================ > > hda: status timeout: status=0xd0 { Busy } > > > > hda: no DRQ after issuing WRITE > > ide0: reset: success > > hda: status timeout: status=0xd0 { Busy } > > > > hda: no DRQ after issuing WRITE > > ide0: reset: success > > ============================================= > > > > From hdparm > > ============================================ > > /dev/hda: > > > > Model=IC35L080AVVA07-0, FwRev=VA4OA52A, SerialNo=VNC402A4CBRJLA > > Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } > > RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=52 > > BuffType=DualPortCache, BuffSize=1863kB, MaxMultSect=16, MultSect=off > > CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=160836480 > > IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} > > PIO modes: pio0 pio1 pio2 pio3 pio4 > > DMA modes: mdma0 mdma1 mdma2 > > UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 > > AdvancedPM=yes: disabled (255) WriteCache=enabled > > Drive conforms to: ATA/ATAPI-5 T13 1321D revision 1: 2 3 4 5 > > ================================================= > > > > Ive searched high and low to try find out what this means, all ive found > > it people keep saying its all different kinds of things.. > > > > I was wondering if this means my hdd is drying or is ti a setting? > > > > Thanks guys, > > Steve > > > > > > - > > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > Please read the FAQ at http://www.tux.org/lkml/ > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/