Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263387AbTKFG6L (ORCPT ); Thu, 6 Nov 2003 01:58:11 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263388AbTKFG6K (ORCPT ); Thu, 6 Nov 2003 01:58:10 -0500 Received: from parcelfarce.linux.theplanet.co.uk ([195.92.249.252]:2218 "EHLO www.linux.org.uk") by vger.kernel.org with ESMTP id S263387AbTKFG6I (ORCPT ); Thu, 6 Nov 2003 01:58:08 -0500 Date: Thu, 6 Nov 2003 06:58:06 +0000 From: viro@parcelfarce.linux.theplanet.co.uk To: Jason Papadopoulos Cc: linux-kernel@vger.kernel.org Subject: Re: Alpha: ALi 15x3 DMA completely broken now Message-ID: <20031106065806.GO7665@parcelfarce.linux.theplanet.co.uk> References: <5.2.1.1.2.20031106012936.00a9b030@boo.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5.2.1.1.2.20031106012936.00a9b030@boo.net> User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1725 Lines: 40 On Thu, Nov 06, 2003 at 01:34:35AM -0500, Jason Papadopoulos wrote: > > Hello. 2.4.21-rc could not start DMA at boot time on > my system, but hdparm could turn it on afterwards. Now > with 2.4.22, nothing will turn on DMA; using hdparm > locks the machine immediately. > > The machine in question is an DS10 Alphaserver, Ali > M5229 rev c0 IDE controller. Has 2.4.23-pre made any > fixes for this device? Yes - setup_irq() fix in 2.4.23-pre8 (arch/alpha/kernel/irq.c) had fixed IDE hangs on DS10 (verified for 5229 rev c1). If that doesn't help, try to narrow it down - try 2.4.21-* + irq.c change and see where does it stop working. It should be able to do DMA at boot time, BTW: wynton:~# dmesg |head -2 Linux version 2.4.23-pre8 (al@wynton) (gcc version 3.3.2 20031005 (Debian prerelease)) #1 SMP Fri Oct 24 04:27:45 EDT 2003 Booting GENERIC on Tsunami variation Webbrick using machine vector Webbrick from SRM wynton:~# lspci |grep M5229 00:0d.0 IDE interface: ALi Corporation M5229 IDE (rev c1) wynton:~# hdparm -i /dev/hdc|grep modes PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 udma3 udma4 wynton:~# hdparm -i /dev/hda|grep modes PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 *mdma2 DS10 with cdrom on hda and disk on hdc, no ide-related arguments in command line. Revision c0 won't do UDMA, but it should be able to do DMA just fine... What configuration do you have? - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/