Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Received-SPF: Pass (protection.outlook.com: domain of analog.com designates
 137.71.25.57 as permitted sender) receiver=protection.outlook.com;
 client-ip=137.71.25.57; helo=nwd2mta4.analog.com;
From:   Stefan Popa <stefan.popa@analog.com>
To:     <jic23@kernel.org>, <robh+dt@kernel.org>
CC:     <knaack.h@gmx.de>, <lars@metafoo.de>,
        <Michael.Hennerich@analog.com>, <pmeerw@pmeerw.net>,
        <mark.rutland@arm.com>, <linux-iio@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <stefan.popa@analog.com>
Subject: [PATCH 3/3] dt-bindings: adxl372: Document the adxl372 I2C bindings
Date:   Tue, 4 Sep 2018 17:13:14 +0300
Message-ID: <1536070394-5679-1-git-send-email-stefan.popa@analog.com>
MIME-Version: 1.0
Content-Type: text/plain
SpamDiagnosticOutput: 1:99
SpamDiagnosticMetadata: NSPM
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 04 Sep 2018 14:13:36.5001
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 74e11e35-0daf-4f6e-64df-08d612709b07
X-MS-Exchange-CrossTenant-Id: eaa689b4-8f87-40e0-9c6f-7228de4d754a
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=eaa689b4-8f87-40e0-9c6f-7228de4d754a;Ip=[137.71.25.57];Helo=[nwd2mta4.analog.com]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN3PR0301MB1218
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

The adxl372 is designed to communicate in either SPI or I2C protocol.
This patch adds the documentation of device tree bindings for adxl372
I2C.

Signed-off-by: Stefan Popa <stefan.popa@analog.com>
---
 Documentation/devicetree/bindings/iio/accel/adxl372.txt | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
index 9409984..a289964 100644
--- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
+++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
@@ -4,14 +4,25 @@ http://www.analog.com/media/en/technical-documentation/data-sheets/adxl372.pdf
 
 Required properties:
  - compatible : should be "adi,adxl372"
- - reg: SPI chip select number for the device
+ - reg: the I2C address or SPI chip select number for the device
+
+Required properties for SPI bus usage:
  - spi-max-frequency: Max SPI frequency to use
 
 Optional properties:
  - interrupts: interrupt mapping for IRQ as documented in
    Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 
-Example:
+Example for a I2C device node:
+
+	accelerometer@53 {
+		compatible = "adi,adxl372";
+		reg = <0x53>;
+		interrupt-parent = <&gpio>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+Example for a SPI device node:
 
 	accelerometer@0 {
 		compatible = "adi,adxl372";
-- 
2.7.4