Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Received-SPF: Pass (protection.outlook.com: domain of xilinx.com designates
 149.199.60.100 as permitted sender) receiver=protection.outlook.com;
 client-ip=149.199.60.100; helo=xsj-pvapsmtpgw02;
From:   Nava kishore Manne <nava.manne@xilinx.com>
To:     <robh+dt@kernel.org>, <mark.rutland@arm.com>,
        <michal.simek@xilinx.com>, <p.zabel@pengutronix.de>,
        <nava.manne@xilinx.com>, <rajanv@xilinx.com>, <jollys@xilinx.com>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
Subject: [RFC PATCH v2 2/3] dt-bindings: fpga: Add bindings for ZynqMP reset driver
Date:   Wed, 5 Sep 2018 12:10:41 +0530
Message-ID: <1536129642-7049-3-git-send-email-nava.manne@xilinx.com>
In-Reply-To: <1536129642-7049-1-git-send-email-nava.manne@xilinx.com>
References: <1536129642-7049-1-git-send-email-nava.manne@xilinx.com>
MIME-Version: 1.0
Content-Type: text/plain
SpamDiagnosticOutput: 1:99
SpamDiagnosticMetadata: NSPM
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 05 Sep 2018 06:41:10.5751
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: b0de60f0-f3a2-4f87-6aae-08d612fa9165
X-MS-Exchange-CrossTenant-Id: 657af505-d5df-48d0-8300-c31994686c5c
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=657af505-d5df-48d0-8300-c31994686c5c;Ip=[149.199.60.100];Helo=[xsj-pvapsmtpgw02]
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: CY4PR02MB2679
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Add documentation to describe Xilinx ZynqMP reset driver
bindings.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v2:
		-Moved reset node as a child to firwmare
		 node.

 .../firmware/xilinx/xlnx,zynqmp-firmware.txt       | 142 +++++++++++++++++++++
 1 file changed, 142 insertions(+)

diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index 1b431d9..351b1bb 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -17,6 +17,144 @@ Required properties:
 		  - "smc" : SMC #0, following the SMCCC
 		  - "hvc" : HVC #0, following the SMCCC
 
+--------------------------------------------------------------------------
+ =  Zynq UltraScale+ MPSoC reset driver binding =
+--------------------------------------------------------------------------
+The Zynq UltraScale+ MPSoC has several different resets.
+
+See Chapter 36 of the Zynq UltraScale+ MPSoC TRM (UG) for more information
+about zynqmp resets.
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required Properties:
+- compatible:	"xlnx,zynqmp-reset"
+- #reset-cells:	Specifies the number of cells needed to encode reset
+		line, should be 1
+
+Reset outputs:
+	0   :PCIE config reset.
+	1   :PCIE bridge block level reset (AXI interface).
+	2   :PCIE control block level,reset.
+	3   :Display Port block level reset (includes DPDMA).
+	4   :FPD WDT reset.
+	5   :AF_FM5 block level reset.
+	6   :AF_FM4 block level reset.
+	7   :AF_FM3 block level reset.
+	8   :AF_FM2 block level reset.
+	9   :AF_FM1 block level reset.
+	10  :AF_FM0 block level reset.
+	11  :GDMA block level reset.
+	12  :Pixel Processor (GPU_PP1) block level reset.
+	13  :Pixel Processor (GPU_PP0) block level reset.
+	14  :GPU block level reset.
+	15  :GT block level reset.
+	16  :Sata block level reset.
+	17  :ACPU3 power on reset.
+	18  :ACPU2 power on reset.
+	19  :ACPU1 power on reset.
+	20  :ACPU0 power on reset.
+	21  :APU L2 reset.
+	22  :ACPU3 reset.
+	23  :ACPU2 reset.
+	24  :ACPU1 reset.
+	25  :ACPU0 reset.
+	26  :DDR block level reset inside of the DDR Sub System.
+	27  :APM block level reset inside of the DDR Sub System.
+	28  :soft reset.
+	29  :GEM 0 reset.
+	30  :GEM 1 reset.
+	31  :GEM 2 reset.
+	32  :GEM 3 reset.
+	33  :qspi reset.
+	34  :uart0 reset.
+	35  :uart1 reset.
+	36  :spi0 reset.
+	37  :spi1 reset.
+	38  :sdio0 reset.
+	39  :sdio1 reset.
+	40  :can0 reset.
+	41  :can1 reset.
+	42  :i2c0 reset.
+	43  :i2c1 reset.
+	44  :ttc0 reset.
+	45  :ttc1 reset.
+	46  :ttc2 reset.
+	47  :ttc3 reset.
+	48  :swdt reset.
+	49  :nand reset.
+	50  :adma reset.
+	51  :gpio reset.
+	52  :iou_cc reset.
+	53  :timestamp reset.
+	54  :rpu_r50 reset.
+	55  :rpu r51 reset.
+	56  :rpu_amba reset.
+	57  :ocm reset.
+	58  :rpu_pge reset.
+	59  :usb0_core reset.
+	60  :usb1_core reset.
+	61  :usb0_hiber reset.
+	62  :usb1_hiber reset.
+	63  :usb0_apb reset.
+	64  :usb1_apb reset.
+	65  :ipi reset.
+	66  :apm reset.
+	67  :rtc reset.
+	68  :sysmon reset.
+	69  :afi_fm6 reset.
+	70  :lpd_swdt reset.
+	71  :fpd_reset.
+	72  :rpu_dbg1 reset.
+	73  :rpu_dbg0 reset.
+	74  :dbg_lpd reset.
+	75  :dbg_fpd reset.
+	76  :apll reset.
+	77  :dpll reset.
+	78  :vpll reset.
+	79  :iopll reset.
+	80  :rpll reset.
+	81  :gpio_pl_0 reset.
+	82  :gpio_pl_1 reset.
+	83  :gpio_pl_2 reset.
+	84  :gpio_pl_3 reset.
+	85  :gpio_pl_4 reset.
+	86  :gpio_pl_5 reset.
+	87  :gpio_pl_6 reset.
+	88  :gpio_pl_7 reset.
+	89  :gpio_pl_8 reset.
+	90  :gpio_pl_9 reset.
+	91  :gpio_pl_10 reset.
+	92  :gpio_pl_11 reset.
+	93  :gpio_pl_12 reset.
+	94  :gpio_pl_13 reset.
+	95  :gpio_pl_14 reset.
+	96  :gpio_pl_15 reset.
+	97  :gpio_pl_16 reset.
+	98  :gpio_pl_17 reset.
+	99  :gpio_pl_18 reset.
+	100 :gpio_pl_19 reset.
+	101 :gpio_pl_20 reset.
+	102 :gpio_pl_21 reset.
+	103 :gpio_pl_22 reset.
+	104 :gpio_pl_23 reset.
+	105 :gpio_pl_24 reset.
+	106 :gpio_pl_25 reset.
+	107 :gpio_pl_26 reset.
+	108 :gpio_pl_27 reset.
+	109 :gpio_pl_28 reset.
+	110 :gpio_pl_29 reset.
+	111 :gpio_pl_30 reset.
+	112 :gpio_pl_31 reset.
+	113 :rpu_ls reset.
+	114 :ps_only reset.
+	115 :pl reset.
+	116 :ps_pl0 reset
+	117 :ps_pl1 reset
+	118 :ps_pl2 reset
+	119 :ps_pl3 reset
+
 -------
 Example
 -------
@@ -25,5 +163,9 @@ firmware {
 	zynqmp_firmware: zynqmp-firmware {
 		compatible = "xlnx,zynqmp-firmware";
 		method = "smc";
+		reset-controller:reset-controller@0 {
+			compatible = "xlnx,zynqmp-reset";
+			#reset-cells = <1>;
+		};
 	};
 };
-- 
2.7.4