Received: by 2002:ac0:a5a6:0:0:0:0:0 with SMTP id m35-v6csp499916imm; Thu, 6 Sep 2018 06:02:40 -0700 (PDT) X-Google-Smtp-Source: ANB0VdZuHzU1M6+m5SVUTdiS7IPJd/XszBn1vtoYaEFZHQOcEoyRJKuanU/u89Ez9SVaBOjmku4e X-Received: by 2002:a63:3f45:: with SMTP id m66-v6mr2582936pga.51.1536238960405; Thu, 06 Sep 2018 06:02:40 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1536238960; cv=none; d=google.com; s=arc-20160816; b=UluObbKy3+yu31XfKNCGRfo8ue9B/aYmZbDqgCZMmE+2C1X+UG5QrkExa5Ximyl4bO 0fkVswgA7jIcIz0bMU3BZK+S7ALikRzmhChZigVi0D4Lo6OiR3Hf8yYVAOIr4NClL3jE IJdFBaXCdzLBGL0ot3TCsocji9oAYVWo+whJboYg1WHuQfWwF3JuPN0/nCz0eX27IrLG Jd2WLOEg4KEBGYRPTSJrk0haNS7o8sGzuCkEr+vydhePP+ctDer7p3cYYMCvavUu+eyJ qrufHQ1LgPn/A/zJNPKY1Ruwm+fUNttOd4m/J2dN0S8w6wYuS8j1N1R+e0Yc/x+oNR5g rjQQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:message-id:date:subject:cc:to:from :dkim-signature; bh=7XiGDEHo5lAFZLtKMuYdr5Vqkjq65bQus/cUBj9sKhU=; b=nuhdMHBz/C1ZvwBTohWJ3Oa37Wu5REHneBGYTa3lOZiyuVwjitV8rJ02K8TrrsmvNT Tc7KBi9IoCz0ZlqnK9o0mcE8bQULIf7l111oLPh2r3XcTro7gTEts2YRXoT9JHHFVN/i KAvkujWBWGYo+DO+6CJAdOn+awdVltilFot515lM/pR4sT2MTIQ7F0ZEGf3ZG2HTdLJ5 ZHGQtO+zHg2fqHfiszO5D6Jzwnai+BuwoRvv5P/dp2eIAz5oZaJwwlfMZ9o+DhMhcwNY 6n8Biujx7Xra+6MF2IzvV2bd2HhFerQFYHQdZY9QALtKeTq3IWsnTRxSdY2+NYzwkMzB XiVg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=TSfBbCDt; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id r14-v6si5135622pgl.490.2018.09.06.06.02.23; Thu, 06 Sep 2018 06:02:40 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=TSfBbCDt; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728419AbeIFRAF (ORCPT + 99 others); Thu, 6 Sep 2018 13:00:05 -0400 Received: from mail-lf1-f66.google.com ([209.85.167.66]:41427 "EHLO mail-lf1-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727757AbeIFRAE (ORCPT ); Thu, 6 Sep 2018 13:00:04 -0400 Received: by mail-lf1-f66.google.com with SMTP id l26-v6so8877533lfc.8 for ; Thu, 06 Sep 2018 05:24:46 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id; bh=7XiGDEHo5lAFZLtKMuYdr5Vqkjq65bQus/cUBj9sKhU=; b=TSfBbCDtd5JRPLx0JenVKGizVnTSSrUJdhWpsNI0M2j79Dy29Hm8mVyjzW5DhejjS3 LrCxiMo+5joRWxGVBJB8qMsndXH4yPDH4c/ruXvtvSbk+8XnxSrOzFli8qkUZdzMifJ7 IYcDOApLZxkKWl/sKSggjkm4RGfWGMArHX9sY= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id; bh=7XiGDEHo5lAFZLtKMuYdr5Vqkjq65bQus/cUBj9sKhU=; b=ozcwbOkB7AY9J6qgzibU91J8U6juHAzCi1c/uksExv0lm6wOEjWJFPusn6+lei1oJv 3xUusGLufmQbRtiYRSn4tu+jSxlX2eSqshtQn/zQObtQvaJa4zsqW70tAFzKEvxcRiOg GcyHJU3i7DhYJyzRiDcrw1CbCndLL5rUmHumGeThzocU+Wgy6DQoFIW6ZE3xmHJ4zejj KGPC/2XdVxQD6xWeHNLOOVGrQl/DE/dV6Vz2IBmfivtZssS6zfbfjbfKlaHUof7kpWQG rGaqoqaz6Nqmvev50kaTHazhvuSyJgCnV2HdXDS8jHF+QeBt/lOXPXiZDiq3cWpHKNbZ wH8w== X-Gm-Message-State: APzg51DaJLfdz/0+OLj7lsJ65TQUZ+RS09PzWEiPmEUjiqomADAU6Y1e 2bjdMia7wQUErt8A5svYrKTvfA== X-Received: by 2002:a19:16d8:: with SMTP id 85-v6mr1882799lfw.142.1536236685063; Thu, 06 Sep 2018 05:24:45 -0700 (PDT) Received: from genomnajs.ideon.se ([85.235.10.227]) by smtp.gmail.com with ESMTPSA id 36-v6sm818221lja.65.2018.09.06.05.24.42 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Thu, 06 Sep 2018 05:24:43 -0700 (PDT) From: Linus Walleij To: Liam Girdwood , Mark Brown Cc: linux-kernel@vger.kernel.org, Linus Walleij , Janusz Krzysztofik , Alexander Shiyan , Haojian Zhuang , Aaro Koskinen , Mike Rapoport , Robert Jarzmik , Philipp Zabel , Daniel Mack , Marc Zyngier , Jacopo Mondi , Geert Uytterhoeven , Russell King Subject: [PATCH v7] regulator: fixed: Convert to use GPIO descriptor only Date: Thu, 6 Sep 2018 14:24:36 +0200 Message-Id: <20180906122436.25610-1-linus.walleij@linaro.org> X-Mailer: git-send-email 2.17.1 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org As we augmented the regulator core to accept a GPIO descriptor instead of a GPIO number, we can augment the fixed GPIO regulator to look up and pass that descriptor directly from device tree or board GPIO descriptor look up tables. Some boards just auto-enumerate their fixed regulator platform devices and I have assumed they get names like "fixed-regulator.0" but it's pretty hard to guess this. I need some testing from board maintainers to be sure. Other boards are straight forward, using just plain "fixed-regulator" (ID -1) or "fixed-regulator.1" hammering down the device ID. It seems the da9055 and da9211 has never got around to actually passing any enable gpio into its platform data (not the in-tree code anyway) so we can just decide to simply pass a descriptor instead. The fixed GPIO-controlled regulator in mach-pxa/ezx.c was confusingly named "*_dummy_supply_device" while it is a very real device backed by a GPIO line. There is nothing dummy about it at all, so I renamed it with the infix *_regulator_* as part of this patch set. Intel MID portions tested by Andy. Cc: Janusz Krzysztofik # OMAP1 Cc: Alexander Shiyan # i.MX boards user Cc: Haojian Zhuang # MMP2 maintainer Cc: Aaro Koskinen # OMAP1 maintainer Cc: Mike Rapoport # EM-X270 maintainer Cc: Robert Jarzmik # EZX maintainer Cc: Philipp Zabel # Magician maintainer Cc: Daniel Mack # Raumfeld maintainer Cc: Marc Zyngier # Zeus maintainer Cc: Jacopo Mondi # SH Ecovec24 Cc: Geert Uytterhoeven # SuperH pinctrl/GPIO maintainer Cc: Russell King # SA1100 Tested-by: Andy Shevchenko # Check the x86 BCM stuff Acked-by: Tony Lindgren # OMAP1,2,3 maintainer Signed-off-by: Linus Walleij --- ChangeLog v6->v7: - As the autobuilder churned along, after 24+ hours it was testing SH and found a bug in the ecovec24 boardfile. It does test a SH arch byt default, sh7763rdp_defconfig, sadly not this one. So it discovers more obscure boards in later testing. - Shaked out this bug too and re-pushed and posted. ChangeLog v5->v6: - New code appeared in the OMAP1 AMS delta board that added a new user of the removed .gpio member. The build robot was first happy, then came back later and was not happy. - Fixed up the offending .gpio, now rebuilt for this OMAP1 board specifically to make sure it really really work now. ChangeLog v4->v5: - Rebased on v4.19-rc1 - Put the OMAP1 AMD delta GPIO table addition in the *TOP* of the ams_delta_gpio_tables[] so Janusz can add any new addtions on the *BOTTOM* - Hopefully we can merge this now. ChangeLog v3->v4: - Rebase and adapt the OMAP1 changes for the GPIO descriptor look-up tables deployed by Janusz. - Add two calls to add the GPIO descriptor tables properly on the Super-H Ecovec24 board as pointed out by Geert. - Go over all patches to board files and make sure we pass a NULL descriptor instead of an "enable" descriptor. The code is looking for unnamed GPIOs as the device tree also just pass gpio[s] = <&foo> so board files also need to use anonymous GPIOs. - Fold in an EZX fix from Arnd Bergmann. - Add Andy's Tested-by tag. - Send this patch *ALONE* as I realized I need to take smaller steps so things do not blow up left and right. ChangeLog v2->v3: - Resending. ChangeLog v1->v2: - Rebase the patch on mainline with Blackfin gone and other changes. - Fix up the new users that appeared in sa1100 - Drop some suplus comments in x86. --- arch/arm/mach-imx/mach-mx21ads.c | 12 ++++++- arch/arm/mach-imx/mach-mx27ads.c | 12 ++++++- arch/arm/mach-mmp/brownstone.c | 12 ++++++- arch/arm/mach-omap1/board-ams-delta.c | 12 +++++-- arch/arm/mach-omap2/pdata-quirks.c | 16 ++++++++- arch/arm/mach-pxa/em-x270.c | 1 - arch/arm/mach-pxa/ezx.c | 33 ++++++++++++------- arch/arm/mach-pxa/magician.c | 2 +- arch/arm/mach-pxa/raumfeld.c | 12 +++++-- arch/arm/mach-pxa/zeus.c | 23 +++++++++++-- arch/arm/mach-s3c64xx/mach-crag6410.c | 1 - arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 - arch/arm/mach-sa1100/assabet.c | 21 ++++++++---- arch/arm/mach-sa1100/generic.c | 5 +-- arch/arm/mach-sa1100/generic.h | 3 +- arch/arm/mach-sa1100/shannon.c | 4 +-- arch/sh/boards/mach-ecovec24/setup.c | 27 +++++++++++++-- .../intel-mid/device_libs/platform_bcm43xx.c | 17 ++++++++-- drivers/regulator/fixed-helper.c | 1 - drivers/regulator/fixed.c | 33 +++++++++---------- include/linux/regulator/fixed.h | 3 -- 21 files changed, 188 insertions(+), 63 deletions(-) diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 5e366824814f..2e1e540f2e5a 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -175,6 +176,7 @@ static struct resource mx21ads_mmgpio_resource = DEFINE_RES_MEM_NAMED(MX21ADS_IO_REG, SZ_2, "dat"); static struct bgpio_pdata mx21ads_mmgpio_pdata = { + .label = "mx21ads-mmgpio", .base = MX21ADS_MMGPIO_BASE, .ngpio = 16, }; @@ -203,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = { static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { .supply_name = "LCD", .microvolts = 3300000, - .gpio = MX21ADS_IO_LCDON, .enable_high = 1, .init_data = &mx21ads_lcd_regulator_init_data, }; @@ -216,6 +217,14 @@ static struct platform_device mx21ads_lcd_regulator = { }, }; +static struct gpiod_lookup_table mx21ads_lcd_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ + .table = { + GPIO_LOOKUP("mx21ads-mmgpio", 9, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * Connected is a portrait Sharp-QVGA display * of type: LQ035Q7DB02 @@ -311,6 +320,7 @@ static void __init mx21ads_late_init(void) { imx21_add_mxc_mmc(0, &mx21ads_sdhc_pdata); + gpiod_add_lookup_table(&mx21ads_lcd_regulator_gpiod_table); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); mx21ads_cs8900_resources[1].start = diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index a04bb094ded1..f5e04047ed13 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -16,6 +16,7 @@ #include /* Needed for gpio_to_irq() */ #include +#include #include #include #include @@ -230,10 +231,17 @@ static struct regulator_init_data mx27ads_lcd_regulator_init_data = { static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { .supply_name = "LCD", .microvolts = 3300000, - .gpio = MX27ADS_LCD_GPIO, .init_data = &mx27ads_lcd_regulator_init_data, }; +static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ + .table = { + GPIO_LOOKUP("LCD", 0, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init mx27ads_regulator_init(void) { struct gpio_chip *vchip; @@ -247,6 +255,8 @@ static void __init mx27ads_regulator_init(void) vchip->set = vgpio_set; gpiochip_add_data(vchip, NULL); + gpiod_add_lookup_table(&mx27ads_lcd_regulator_gpiod_table); + platform_device_register_data(NULL, "reg-fixed-voltage", PLATFORM_DEVID_AUTO, &mx27ads_lcd_regulator_pdata, diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index d1613b954926..a04e249c654b 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -148,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = { static struct fixed_voltage_config brownstone_v_5vp = { .supply_name = "v_5vp", .microvolts = 5000000, - .gpio = GPIO_5V_ENABLE, .enable_high = 1, .enabled_at_boot = 1, .init_data = &brownstone_v_5vp_data, @@ -162,6 +162,15 @@ static struct platform_device brownstone_v_5vp_device = { }, }; +static struct gpiod_lookup_table brownstone_v_5vp_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", /* .id set to 1 above */ + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_5V_ENABLE, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct max8925_platform_data brownstone_max8925_info = { .irq_base = MMP_NR_IRQS, }; @@ -217,6 +226,7 @@ static void __init brownstone_init(void) mmp2_add_isram(&mmp2_isram_platdata); /* enable 5v regulator */ + gpiod_add_lookup_table(&brownstone_v_5vp_gpiod_table); platform_device_register(&brownstone_v_5vp_device); } diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index dd28d2614d7f..f226973f3d8c 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -300,7 +300,6 @@ static struct regulator_init_data modem_nreset_data = { static struct fixed_voltage_config modem_nreset_config = { .supply_name = "modem_nreset", .microvolts = 3300000, - .gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET, .startup_delay = 25000, .enable_high = 1, .enabled_at_boot = 1, @@ -315,6 +314,15 @@ static struct platform_device modem_nreset_device = { }, }; +static struct gpiod_lookup_table ams_delta_nreset_gpiod_table = { + .dev_id = "reg-fixed-voltage", + .table = { + GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_NRESET, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + struct modem_private_data { struct regulator *regulator; }; @@ -568,7 +576,6 @@ static struct regulator_init_data keybrd_pwr_initdata = { static struct fixed_voltage_config keybrd_pwr_config = { .supply_name = "keybrd_pwr", .microvolts = 5000000, - .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .enable_high = 1, .init_data = &keybrd_pwr_initdata, }; @@ -602,6 +609,7 @@ static struct platform_device *ams_delta_devices[] __initdata = { }; static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = { + &ams_delta_nreset_gpiod_table, &ams_delta_audio_gpio_table, &keybrd_pwr_gpio_table, &ams_delta_lcd_gpio_table, diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 7f02743edbe4..d0f7a7cc70cb 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -328,7 +329,6 @@ static struct regulator_init_data pandora_vmmc3 = { static struct fixed_voltage_config pandora_vwlan = { .supply_name = "vwlan", .microvolts = 1800000, /* 1.8V */ - .gpio = PANDORA_WIFI_NRESET_GPIO, .startup_delay = 50000, /* 50ms */ .enable_high = 1, .init_data = &pandora_vmmc3, @@ -342,6 +342,19 @@ static struct platform_device pandora_vwlan_device = { }, }; +static struct gpiod_lookup_table pandora_vwlan_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", + .table = { + /* + * As this is a low GPIO number it should be at the first + * GPIO bank. + */ + GPIO_LOOKUP("gpio-0-31", PANDORA_WIFI_NRESET_GPIO, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void pandora_wl1251_init_card(struct mmc_card *card) { /* @@ -403,6 +416,7 @@ static void __init pandora_wl1251_init(void) static void __init omap3_pandora_legacy_init(void) { platform_device_register(&pandora_backlight); + gpiod_add_lookup_table(&pandora_vwlan_gpiod_table); platform_device_register(&pandora_vwlan_device); omap_hsmmc_init(pandora_mmc3); omap_hsmmc_late_init(pandora_mmc3); diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 29be04c6cc48..b14c47a6ee6b 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -986,7 +986,6 @@ static struct fixed_voltage_config camera_dummy_config = { .supply_name = "camera_vdd", .input_supply = "vcc cam", .microvolts = 2800000, - .gpio = -1, .enable_high = 0, .init_data = &camera_dummy_initdata, }; diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 2c90b58f347d..565965e9acc7 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -698,31 +699,39 @@ static struct pxa27x_keypad_platform_data e2_keypad_platform_data = { #if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_A910) /* camera */ -static struct regulator_consumer_supply camera_dummy_supplies[] = { +static struct regulator_consumer_supply camera_regulator_supplies[] = { REGULATOR_SUPPLY("vdd", "0-005d"), }; -static struct regulator_init_data camera_dummy_initdata = { - .consumer_supplies = camera_dummy_supplies, - .num_consumer_supplies = ARRAY_SIZE(camera_dummy_supplies), +static struct regulator_init_data camera_regulator_initdata = { + .consumer_supplies = camera_regulator_supplies, + .num_consumer_supplies = ARRAY_SIZE(camera_regulator_supplies), .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, }; -static struct fixed_voltage_config camera_dummy_config = { +static struct fixed_voltage_config camera_regulator_config = { .supply_name = "camera_vdd", .microvolts = 2800000, - .gpio = GPIO50_nCAM_EN, .enable_high = 0, - .init_data = &camera_dummy_initdata, + .init_data = &camera_regulator_initdata, }; -static struct platform_device camera_supply_dummy_device = { +static struct platform_device camera_supply_regulator_device = { .name = "reg-fixed-voltage", .id = 1, .dev = { - .platform_data = &camera_dummy_config, + .platform_data = &camera_regulator_config, + }, +}; + +static struct gpiod_lookup_table camera_supply_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN, + NULL, GPIO_ACTIVE_HIGH), + { }, }, }; #endif @@ -800,7 +809,7 @@ static struct i2c_board_info a780_i2c_board_info[] = { static struct platform_device *a780_devices[] __initdata = { &a780_gpio_keys, - &camera_supply_dummy_device, + &camera_supply_regulator_device, }; static void __init a780_init(void) @@ -823,6 +832,7 @@ static void __init a780_init(void) if (a780_camera_init() == 0) pxa_set_camera_info(&a780_pxacamera_platform_data); + gpiod_add_lookup_table(&camera_supply_gpiod_table); pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a780_devices)); @@ -1098,7 +1108,7 @@ static struct i2c_board_info __initdata a910_i2c_board_info[] = { static struct platform_device *a910_devices[] __initdata = { &a910_gpio_keys, - &camera_supply_dummy_device, + &camera_supply_regulator_device, }; static void __init a910_init(void) @@ -1121,6 +1131,7 @@ static void __init a910_init(void) if (a910_camera_init() == 0) pxa_set_camera_info(&a910_pxacamera_platform_data); + gpiod_add_lookup_table(&camera_supply_gpiod_table); pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup)); platform_add_devices(ARRAY_AND_SIZE(ezx_devices)); platform_add_devices(ARRAY_AND_SIZE(a910_devices)); diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index c5325d1ae77b..14c0f80bc9e7 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -696,7 +697,6 @@ static struct regulator_init_data vads7846_regulator = { static struct fixed_voltage_config vads7846 = { .supply_name = "vads7846", .microvolts = 3300000, /* probably */ - .gpio = -EINVAL, .startup_delay = 0, .init_data = &vads7846_regulator, }; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 034345546f84..bd3c23ad6ce6 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -886,7 +886,6 @@ static struct regulator_init_data audio_va_initdata = { static struct fixed_voltage_config audio_va_config = { .supply_name = "audio_va", .microvolts = 5000000, - .gpio = GPIO_AUDIO_VA_ENABLE, .enable_high = 1, .enabled_at_boot = 0, .init_data = &audio_va_initdata, @@ -900,6 +899,15 @@ static struct platform_device audio_va_device = { }, }; +static struct gpiod_lookup_table audio_va_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* Dummy supplies for Codec's VD/VLC */ static struct regulator_consumer_supply audio_dummy_supplies[] = { @@ -918,7 +926,6 @@ static struct regulator_init_data audio_dummy_initdata = { static struct fixed_voltage_config audio_dummy_config = { .supply_name = "audio_vd", .microvolts = 3300000, - .gpio = -1, .init_data = &audio_dummy_initdata, }; @@ -1033,6 +1040,7 @@ static void __init raumfeld_audio_init(void) else gpio_direction_output(GPIO_MCLK_RESET, 1); + gpiod_add_lookup_table(&audio_va_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices)); } diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index e3851795d6d7..d53ea12fc766 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -410,7 +411,6 @@ static struct regulator_init_data can_regulator_init_data = { static struct fixed_voltage_config can_regulator_pdata = { .supply_name = "CAN_SHDN", .microvolts = 3300000, - .gpio = ZEUS_CAN_SHDN_GPIO, .init_data = &can_regulator_init_data, }; @@ -422,6 +422,15 @@ static struct platform_device can_regulator_device = { }, }; +static struct gpiod_lookup_table can_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct mcp251x_platform_data zeus_mcp2515_pdata = { .oscillator_frequency = 16*1000*1000, }; @@ -538,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = { static struct fixed_voltage_config zeus_ohci_regulator_config = { .supply_name = "vbus2", .microvolts = 5000000, /* 5.0V */ - .gpio = ZEUS_USB2_PWREN_GPIO, .enable_high = 1, .startup_delay = 0, .init_data = &zeus_ohci_regulator_data, @@ -552,6 +560,15 @@ static struct platform_device zeus_ohci_regulator_device = { }, }; +static struct gpiod_lookup_table zeus_ohci_regulator_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("gpio-pxa", ZEUS_USB2_PWREN_GPIO, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct pxaohci_platform_data zeus_ohci_platform_data = { .port_mode = PMM_NPS_MODE, /* Clear Power Control Polarity Low and set Power Sense @@ -855,6 +872,8 @@ static void __init zeus_init(void) pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config)); + gpiod_add_lookup_table(&can_regulator_gpiod_table); + gpiod_add_lookup_table(&zeus_ohci_regulator_gpiod_table); platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices)); zeus_register_ohci(); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index f04650297487..379424d72ae7 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -352,7 +352,6 @@ static struct fixed_voltage_config wallvdd_pdata = { .supply_name = "WALLVDD", .microvolts = 5000000, .init_data = &wallvdd_data, - .gpio = -EINVAL, }; static struct platform_device wallvdd_device = { diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index c46fa5dfd2e0..908e5aa831c8 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -222,7 +222,6 @@ static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = { .supply_name = "B_PWR_5V", .microvolts = 5000000, .init_data = &smdk6410_b_pwr_5v_data, - .gpio = -EINVAL, }; static struct platform_device smdk6410_b_pwr_5v = { diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 575ec085cffa..3e8c0948abcc 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -101,7 +101,7 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val) assabet_bcr_gc = gc; - return gc->base; + return 0; } /* @@ -471,6 +471,14 @@ static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = { .enable_high = 1, }; +static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("assabet", 0, NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init assabet_init(void) { /* @@ -517,9 +525,11 @@ static void __init assabet_init(void) neponset_resources, ARRAY_SIZE(neponset_resources)); #endif } else { + gpiod_add_lookup_table(&assabet_cf_vcc_gpio_table); sa11x0_register_fixed_regulator(0, &assabet_cf_vcc_pdata, - assabet_cf_vcc_consumers, - ARRAY_SIZE(assabet_cf_vcc_consumers)); + assabet_cf_vcc_consumers, + ARRAY_SIZE(assabet_cf_vcc_consumers), + true); } @@ -802,7 +812,6 @@ fs_initcall(assabet_leds_init); void __init assabet_init_irq(void) { - unsigned int assabet_gpio_base; u32 def_val; sa1100_init_irq(); @@ -817,9 +826,7 @@ void __init assabet_init_irq(void) * * This must precede any driver calls to BCR_set() or BCR_clear(). */ - assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val); - - assabet_cf_vcc_pdata.gpio = assabet_gpio_base + 0; + assabet_init_gpio((void *)&ASSABET_BCR, def_val); } MACHINE_START(ASSABET, "Intel-Assabet") diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7167ddf84a0e..800321c6cbd8 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -348,7 +348,8 @@ void __init sa11x0_init_late(void) int __init sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg, - struct regulator_consumer_supply *supplies, unsigned num_supplies) + struct regulator_consumer_supply *supplies, unsigned num_supplies, + bool uses_gpio) { struct regulator_init_data *id; @@ -356,7 +357,7 @@ int __init sa11x0_register_fixed_regulator(int n, if (!cfg->init_data) return -ENOMEM; - if (cfg->gpio < 0) + if (!uses_gpio) id->constraints.always_on = 1; id->constraints.name = cfg->supply_name; id->constraints.min_uV = cfg->microvolts; diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h index 5f3cb52fa6ab..158a4fd5ca24 100644 --- a/arch/arm/mach-sa1100/generic.h +++ b/arch/arm/mach-sa1100/generic.h @@ -54,4 +54,5 @@ void sa11x0_register_pcmcia(int socket, struct gpiod_lookup_table *); struct fixed_voltage_config; struct regulator_consumer_supply; int sa11x0_register_fixed_regulator(int n, struct fixed_voltage_config *cfg, - struct regulator_consumer_supply *supplies, unsigned num_supplies); + struct regulator_consumer_supply *supplies, unsigned num_supplies, + bool uses_gpio); diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 22f7fe0b809f..5bc82e2671c6 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -102,14 +102,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = { .supply_name = "cf-power", .microvolts = 3300000, .enabled_at_boot = 1, - .gpio = -EINVAL, }; static void __init shannon_init(void) { sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata, shannon_cf_vcc_consumers, - ARRAY_SIZE(shannon_cf_vcc_consumers)); + ARRAY_SIZE(shannon_cf_vcc_consumers), + false); sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table); sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table); sa11x0_ppc_configure_mcp(); diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index adc61d14172c..06a894526a0b 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -633,7 +633,6 @@ static struct regulator_init_data cn12_power_init_data = { static struct fixed_voltage_config cn12_power_info = { .supply_name = "CN12 SD/MMC Vdd", .microvolts = 3300000, - .gpio = GPIO_PTB7, .enable_high = 1, .init_data = &cn12_power_init_data, }; @@ -646,6 +645,16 @@ static struct platform_device cn12_power = { }, }; +static struct gpiod_lookup_table cn12_power_gpiod_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + /* Offset 7 on port B */ + GPIO_LOOKUP("sh7724_pfc", GPIO_PTB7, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ static struct regulator_consumer_supply sdhi0_power_consumers[] = @@ -665,7 +674,6 @@ static struct regulator_init_data sdhi0_power_init_data = { static struct fixed_voltage_config sdhi0_power_info = { .supply_name = "CN11 SD/MMC Vdd", .microvolts = 3300000, - .gpio = GPIO_PTB6, .enable_high = 1, .init_data = &sdhi0_power_init_data, }; @@ -678,6 +686,16 @@ static struct platform_device sdhi0_power = { }, }; +static struct gpiod_lookup_table sdhi0_power_gpiod_table = { + .dev_id = "reg-fixed-voltage.1", + .table = { + /* Offset 6 on port B */ + GPIO_LOOKUP("sh7724_pfc", GPIO_PTB6, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct tmio_mmc_data sdhi0_info = { .chan_priv_tx = (void *)SHDMA_SLAVE_SDHI0_TX, .chan_priv_rx = (void *)SHDMA_SLAVE_SDHI0_RX, @@ -1413,6 +1431,11 @@ static int __init arch_setup(void) DMA_MEMORY_EXCLUSIVE); platform_device_add(ecovec_ceu_devices[1]); + gpiod_add_lookup_table(&cn12_power_gpiod_table); +#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + gpiod_add_lookup_table(&sdhi0_power_gpiod_table); +#endif + return platform_add_devices(ecovec_devices, ARRAY_SIZE(ecovec_devices)); } diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c index 4392c15ed9e0..dbfc5cf2aa93 100644 --- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c +++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c @@ -10,7 +10,7 @@ * of the License. */ -#include +#include #include #include #include @@ -43,7 +43,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = { * real voltage and signaling are still 1.8V. */ .microvolts = 2000000, /* 1.8V */ - .gpio = -EINVAL, .startup_delay = 250 * 1000, /* 250ms */ .enable_high = 1, /* active high */ .enabled_at_boot = 0, /* disabled at boot */ @@ -58,11 +57,23 @@ static struct platform_device bcm43xx_vmmc_regulator = { }, }; +static struct gpiod_lookup_table bcm43xx_vmmc_gpio_table = { + .dev_id = "reg-fixed-voltage.0", + .table = { + GPIO_LOOKUP("0000:00:0c.0", -1, NULL, GPIO_ACTIVE_LOW), + {} + }, +}; + static int __init bcm43xx_regulator_register(void) { + struct gpiod_lookup_table *table = &bcm43xx_vmmc_gpio_table; + struct gpiod_lookup *lookup = table->table; int ret; - bcm43xx_vmmc.gpio = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME); + lookup[0].chip_hwnum = get_gpio_by_name(WLAN_SFI_GPIO_ENABLE_NAME); + gpiod_add_lookup_table(table); + ret = platform_device_register(&bcm43xx_vmmc_regulator); if (ret) { pr_err("%s: vmmc regulator register failed\n", __func__); diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c index 777fac6fb4cb..2c6098e6f4bc 100644 --- a/drivers/regulator/fixed-helper.c +++ b/drivers/regulator/fixed-helper.c @@ -43,7 +43,6 @@ struct platform_device *regulator_register_always_on(int id, const char *name, } data->cfg.microvolts = uv; - data->cfg.gpio = -EINVAL; data->cfg.enabled_at_boot = 1; data->cfg.init_data = &data->init_data; diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 988a7472c2ab..1142f195529b 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -24,10 +24,9 @@ #include #include #include -#include +#include #include #include -#include #include #include @@ -78,10 +77,6 @@ of_get_fixed_voltage_config(struct device *dev, if (init_data->constraints.boot_on) config->enabled_at_boot = true; - config->gpio = of_get_named_gpio(np, "gpio", 0); - if ((config->gpio < 0) && (config->gpio != -ENOENT)) - return ERR_PTR(config->gpio); - of_property_read_u32(np, "startup-delay-us", &config->startup_delay); config->enable_high = of_property_read_bool(np, "enable-active-high"); @@ -102,6 +97,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) struct fixed_voltage_config *config; struct fixed_voltage_data *drvdata; struct regulator_config cfg = { }; + enum gpiod_flags gflags; int ret; drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data), @@ -150,25 +146,28 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) drvdata->desc.fixed_uV = config->microvolts; - if (gpio_is_valid(config->gpio)) { - cfg.ena_gpio = config->gpio; - if (pdev->dev.of_node) - cfg.ena_gpio_initialized = true; - } cfg.ena_gpio_invert = !config->enable_high; if (config->enabled_at_boot) { if (config->enable_high) - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; + gflags = GPIOD_OUT_HIGH; else - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; + gflags = GPIOD_OUT_LOW; } else { if (config->enable_high) - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW; + gflags = GPIOD_OUT_LOW; else - cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH; + gflags = GPIOD_OUT_HIGH; } - if (config->gpio_is_open_drain) - cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN; + if (config->gpio_is_open_drain) { + if (gflags == GPIOD_OUT_HIGH) + gflags = GPIOD_OUT_HIGH_OPEN_DRAIN; + else + gflags = GPIOD_OUT_LOW_OPEN_DRAIN; + } + + cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, NULL, gflags); + if (IS_ERR(cfg.ena_gpiod)) + return PTR_ERR(cfg.ena_gpiod); cfg.dev = &pdev->dev; cfg.init_data = config->init_data; diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 48918be649d4..1a4340ed8e2b 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -24,8 +24,6 @@ struct regulator_init_data; * @supply_name: Name of the regulator supply * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator - * @gpio: GPIO to use for enable control - * set to -EINVAL if not used * @startup_delay: Start-up time in microseconds * @gpio_is_open_drain: Gpio pin is open drain or normal type. * If it is open drain type then HIGH will be set @@ -49,7 +47,6 @@ struct fixed_voltage_config { const char *supply_name; const char *input_supply; int microvolts; - int gpio; unsigned startup_delay; unsigned gpio_is_open_drain:1; unsigned enable_high:1; -- 2.17.1