Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   David Lechner <david@lechnology.com>
To:     linux-spi@vger.kernel.org, linux-iio@vger.kernel.org
Cc:     David Lechner <david@lechnology.com>,
        Jonathan Cameron <jic23@kernel.org>,
        Hartmut Knaack <knaack.h@gmx.de>,
        Lars-Peter Clausen <lars@metafoo.de>,
        Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
        Mark Brown <broonie@kernel.org>, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/4] iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
Date:   Wed, 12 Sep 2018 19:39:19 -0500
Message-Id: <20180913003920.30600-4-david@lechnology.com>
In-Reply-To: <20180913003920.30600-1-david@lechnology.com>
References: <20180913003920.30600-1-david@lechnology.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This changes how the SPI message for the triggered buffer is setup in
the TI ADS7950 A/DC driver. By using the SPI_CS_WORD flag, we can read
multiple samples in a single SPI transfer. If the SPI controller
supports DMA transfers, we can see a significant reduction in CPU usage.

For example, on an ARM9 system running at 456MHz reading just 4 channels
at 100Hz: before this change, top shows the CPU usage of the IRQ thread
of this driver to be ~7.7%. After this change, the CPU usage drops to
~3.8%.

Signed-off-by: David Lechner <david@lechnology.com>
---

It was brought up in v1 that changing the endianness *could* possible break
users who are taking shortcuts by making assumptions on the data format instead
of using the full ABI to determine the format. Since this only *might* be a
problem I would like to make this change anyway to avoid a bunch of byte
swapping. If it turns out that it really is a problem instead of *might be*
a problem, then we can fix it later.

 drivers/iio/adc/ti-ads7950.c | 53 +++++++++++++++++++++---------------
 1 file changed, 31 insertions(+), 22 deletions(-)

diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
index a5bd5944bc66..0ad63592cc3c 100644
--- a/drivers/iio/adc/ti-ads7950.c
+++ b/drivers/iio/adc/ti-ads7950.c
@@ -51,7 +51,7 @@
 
 struct ti_ads7950_state {
 	struct spi_device	*spi;
-	struct spi_transfer	ring_xfer[TI_ADS7950_MAX_CHAN + 2];
+	struct spi_transfer	ring_xfer;
 	struct spi_transfer	scan_single_xfer[3];
 	struct spi_message	ring_msg;
 	struct spi_message	scan_single_msg;
@@ -65,11 +65,11 @@ struct ti_ads7950_state {
 	 * DMA (thus cache coherency maintenance) requires the
 	 * transfer buffers to live in their own cache lines.
 	 */
-	__be16	rx_buf[TI_ADS7950_MAX_CHAN + TI_ADS7950_TIMESTAMP_SIZE]
+	u16 rx_buf[TI_ADS7950_MAX_CHAN + 2 + TI_ADS7950_TIMESTAMP_SIZE]
 							____cacheline_aligned;
-	__be16	tx_buf[TI_ADS7950_MAX_CHAN];
-	__be16			single_tx;
-	__be16			single_rx;
+	u16 tx_buf[TI_ADS7950_MAX_CHAN + 2];
+	u16 single_tx;
+	u16 single_rx;
 
 };
 
@@ -108,7 +108,7 @@ enum ti_ads7950_id {
 		.realbits = bits,				\
 		.storagebits = 16,				\
 		.shift = 12 - (bits),				\
-		.endianness = IIO_BE,				\
+		.endianness = IIO_CPU,				\
 	},							\
 }
 
@@ -249,23 +249,14 @@ static int ti_ads7950_update_scan_mode(struct iio_dev *indio_dev,
 	len = 0;
 	for_each_set_bit(i, active_scan_mask, indio_dev->num_channels) {
 		cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(i) | st->settings;
-		st->tx_buf[len++] = cpu_to_be16(cmd);
+		st->tx_buf[len++] = cmd;
 	}
 
 	/* Data for the 1st channel is not returned until the 3rd transfer */
-	len += 2;
-	for (i = 0; i < len; i++) {
-		if ((i + 2) < len)
-			st->ring_xfer[i].tx_buf = &st->tx_buf[i];
-		if (i >= 2)
-			st->ring_xfer[i].rx_buf = &st->rx_buf[i - 2];
-		st->ring_xfer[i].len = 2;
-		st->ring_xfer[i].cs_change = 1;
-	}
-	/* make sure last transfer's cs_change is not set */
-	st->ring_xfer[len - 1].cs_change = 0;
+	st->tx_buf[len++] = 0;
+	st->tx_buf[len++] = 0;
 
-	spi_message_init_with_transfers(&st->ring_msg, st->ring_xfer, len);
+	st->ring_xfer.len = len * 2;
 
 	return 0;
 }
@@ -281,7 +272,7 @@ static irqreturn_t ti_ads7950_trigger_handler(int irq, void *p)
 	if (ret < 0)
 		goto out;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->rx_buf[2],
 					   iio_get_time_ns(indio_dev));
 
 out:
@@ -298,13 +289,13 @@ static int ti_ads7950_scan_direct(struct iio_dev *indio_dev, unsigned int ch)
 	mutex_lock(&indio_dev->mlock);
 
 	cmd = TI_ADS7950_CR_WRITE | TI_ADS7950_CR_CHAN(ch) | st->settings;
-	st->single_tx = cpu_to_be16(cmd);
+	st->single_tx = cmd;
 
 	ret = spi_sync(st->spi, &st->scan_single_msg);
 	if (ret)
 		goto out;
 
-	ret = be16_to_cpu(st->single_rx);
+	ret = st->single_rx;
 
 out:
 	mutex_unlock(&indio_dev->mlock);
@@ -378,6 +369,14 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	const struct ti_ads7950_chip_info *info;
 	int ret;
 
+	spi->bits_per_word = 16;
+	spi->mode |= SPI_CS_WORD;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "Error in spi setup\n");
+		return ret;
+	}
+
 	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -398,6 +397,16 @@ static int ti_ads7950_probe(struct spi_device *spi)
 	indio_dev->num_channels = info->num_channels;
 	indio_dev->info = &ti_ads7950_info;
 
+	/* build spi ring message */
+	spi_message_init(&st->ring_msg);
+
+	st->ring_xfer.tx_buf = &st->tx_buf[0];
+	st->ring_xfer.rx_buf = &st->rx_buf[0];
+	/* len will be set later */
+	st->ring_xfer.cs_change = true;
+
+	spi_message_add_tail(&st->ring_xfer, &st->ring_msg);
+
 	/*
 	 * Setup default message. The sample is read at the end of the first
 	 * transfer, then it takes one full cycle to convert the sample and one
-- 
2.17.1