Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <20180920161912.17063-2-ricardo.ribalda@gmail.com>
 <20180920184552.4919-1-ricardo.ribalda@gmail.com> <20180920185405.GA26589@amd>
 <CAPybu_2hjrq=r+kpAHKxX59gOXfbqGf9CUPh9CNqv7WGqJsrQQ@mail.gmail.com> <20180920190855.GC26589@amd>
In-Reply-To: <20180920190855.GC26589@amd>
From:   Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Date:   Thu, 20 Sep 2018 21:12:44 +0200
Message-ID: <CAPybu_2mNE7Jmfm2n60Z9Hk_iO+-zLgtu4xn72pJUSXBitVg=g@mail.gmail.com>
Subject: Re: [PATCH v2 2/4] [media] ad5820: Add support for enable pin
To:     Pavel Machek <pavel@ucw.cz>
Cc:     Sakari Ailus <sakari.ailus@iki.fi>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        linux-media <linux-media@vger.kernel.org>,
        LKML <linux-kernel@vger.kernel.org>,
        Hans Verkuil <hans.verkuil@cisco.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Thu, Sep 20, 2018 at 9:08 PM Pavel Machek <pavel@ucw.cz> wrote:
>
> On Thu 2018-09-20 21:06:16, Ricardo Ribalda Delgado wrote:
> > Hi Pavel
> >
> > On Thu, Sep 20, 2018 at 8:54 PM Pavel Machek <pavel@ucw.cz> wrote:
> > >
> > > On Thu 2018-09-20 20:45:52, Ricardo Ribalda Delgado wrote:
> > > > This patch adds support for a programmable enable pin. It can be used in
> > > > situations where the ANA-vcc is not configurable (dummy-regulator), or
> > > > just to have a more fine control of the power saving.
> > > >
> > > > The use of the enable pin is optional.
> > > >
> > > > Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> > >
> > > Do we really want to do that?
> > >
> > > Would it make more sense to add gpio-regulator and connect ad5820 to
> > > it in such case?
> > >
> >
> > My board (based on db820c)  has both:
> >
> > ad5820: dac@0c {
> >    compatible = "adi,ad5820";
> >    reg = <0x0c>;
> >
> >    VANA-supply = <&pm8994_l23>;
> >    enable-gpios = <&msmgpio 26 GPIO_ACTIVE_HIGH>;
> > };
>
> Well, I'm sure you could have gpio-based regulator powered from
> pm8994_l23, and outputting to ad5820.
>
> Does ad5820 chip have a gpio input for enable?

xshutdown pin:
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5821.pdf

(AD5820,AD5821, and AD5823 are compatibles, or at least that is waht
the module manufacturer says :)


>                                                                         Pavel
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


--
Ricardo Ribalda