Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264016AbTKSLVl (ORCPT ); Wed, 19 Nov 2003 06:21:41 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264018AbTKSLVl (ORCPT ); Wed, 19 Nov 2003 06:21:41 -0500 Received: from vana.vc.cvut.cz ([147.32.240.58]:12161 "EHLO vana.vc.cvut.cz") by vger.kernel.org with ESMTP id S264016AbTKSLVY (ORCPT ); Wed, 19 Nov 2003 06:21:24 -0500 Date: Wed, 19 Nov 2003 12:21:22 +0100 From: Petr Vandrovec To: linux-kernel@vger.kernel.org Subject: Losing too many ticks! TSC cannot be used as time source... Message-ID: <20031119112122.GA31451@vana.vc.cvut.cz> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18962 Lines: 471 Hi, today morning my kernel (2.6.0-test9-something) said that TSC became unusable. There are no other messages around this time in the log. It could be thermal throttling, but it should print some message when X86_MCE_P4THERMAL is enabled, yes? It happened after 17hrs 56min of uptime. System never produced this message before. Are there some more information I could supply, or should I simple live with fact that TSC stopped working on my P4 today morning? Thanks, Petr Vandrovec Nov 18 14:44:49 vana ntpdate[1055]: step time server 195.113.144.201 offset -0.499475 sec Nov 18 14:44:49 vana ntpd[1058]: ntpd 4.1.2a@1:4.1.2a-2 Tue Nov 11 11:33:28 UTC 2003 (2) Nov 18 14:44:49 vana ntpd[1058]: precision = 13 usec Nov 18 14:44:49 vana ntpd[1058]: kernel time discipline status 0040 Nov 18 14:44:49 vana ntpd[1058]: frequency initialized 4.967 from /var/lib/ntp/ntp.drift Nov 18 14:48:13 vana ntpd[1058]: kernel time discipline status change 41 Nov 18 17:37:18 vana ntpd[1058]: synchronisation lost Nov 19 08:40:27 vana kernel: Losing too many ticks! Nov 19 08:40:27 vana kernel: TSC cannot be used as a timesource. (Are you running with SpeedStep?) Nov 19 08:40:27 vana kernel: Falling back to a sane timesource. Nov 19 09:03:40 vana ntpd[1058]: time reset 0.348040 s Nov 19 09:03:40 vana ntpd[1058]: synchronisation lost Nov 19 09:54:11 vana ntpd[1058]: time reset -0.261271 s Nov 19 09:54:11 vana ntpd[1058]: synchronisation lost x86info v1.12b. Dave Jones 2001-2003 Feedback to . Found 1 CPU -------------------------------------------------------------------------- eax in: 0x00000000, eax = 00000002 ebx = 756e6547 ecx = 6c65746e edx = 49656e69 eax in: 0x00000001, eax = 00000f12 ebx = 00010808 ecx = 00000000 edx = 3febfbff eax in: 0x00000002, eax = 665b5001 ebx = 00000000 ecx = 00000000 edx = 007a7040 eax in: 0x80000000, eax = 80000004 ebx = 00000000 ecx = 00000000 edx = 00000000 eax in: 0x80000001, eax = 00000000 ebx = 00000000 ecx = 00000000 edx = 00000000 eax in: 0x80000002, eax = 20202020 ebx = 20202020 ecx = 20202020 edx = 6e492020 eax in: 0x80000003, eax = 286c6574 ebx = 50202952 ecx = 69746e65 edx = 52286d75 eax in: 0x80000004, eax = 20342029 ebx = 20555043 ecx = 30362e31 edx = 007a4847 Family: 15 Model: 1 Stepping: 2 Type: 0 Brand: 8 CPU Model: Pentium 4 (Willamette) [D0] Original OEM Processor name string: Intel(R) Pentium(R) 4 CPU 1.60GHz Feature flags: Onboard FPU Virtual Mode Extensions Debugging Extensions Page Size Extensions Time Stamp Counter Model-Specific Registers Physical Address Extensions Machine Check Architecture CMPXCHG8 instruction Onboard APIC SYSENTER/SYSEXIT Memory Type Range Registers Page Global Enable Machine Check Architecture CMOV instruction Page Attribute Table 36-bit PSEs CLFLUSH instruction Debug Trace Store ACPI via MSR MMX support FXSAVE and FXRESTORE instructions SSE support SSE2 support CPU self snoop Hyper-Threading Automatic clock Control Extended feature flags: Pentium 4 specific MSRs: IA32_PLATFORM_ID=0008000000000000 System bus in order queue depth=12 MSR_EBC_FREQUENCY_ID=000000008201ff00 IA32_BIOS_SIGN_ID=0000002800000000 Processor serial number is enabled Fast strings are enabled x87 FPU Fopcode compatability mode is disabled Thermal monitor is enabled Split lock is enabled Instruction TLB: 4K, 2MB or 4MB pages, fully associative, 64 entries. Data TLB: 4KB or 4MB pages, fully associative, 64 entries. L1 Data cache: Size: 8KB Sectored, 4-way associative. line size=64 bytes. No level 2 cache or no level 3 cache if valid 2nd level cache. Instruction trace cache: Size: 12K uOps 8-way associative. L2 unified cache: Size: 256KB Sectored, 8-way associative. line size=64 bytes. Number of reporting banks : 4 Number of extended MC registers : 12 Bank: 0 (0x400) MC0CTL: 00000000 00000000 00000000 00000000 00000000 00000000 11111111 11111111 MC0STATUS: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 MC0ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Bank: 1 (0x404) MC1CTL: 00000000 00000000 00000000 00000000 00000000 00000011 10000000 00000000 MC1STATUS: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 MC1ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Bank: 2 (0x408) MC2CTL: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 10000000 MC2STATUS: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 MC2ADDR: Couldn't read MSR 0x40a Bank: 3 (0x40c) MC3CTL: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 01111110 MC3STATUS: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 MC3ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Number of logical processors supported within the physical package: 0 Microcode version: 0x0000000000000028 Connector type: Socket423 (PGA423 Socket) Datasheet: http://developer.intel.com/design/pentium4/datashts/24919805.pdf Errata: http://developer.intel.com/design/pentium4/specupdt/24919928.pdf MTRR registers: MTRRcap (0xfe): 0x0000000000000508 MTRRphysBase0 (0x200): 0x0000000000000006 MTRRphysMask0 (0x201): 0x0000000fe0000800 MTRRphysBase1 (0x202): 0x00000000da000001 MTRRphysMask1 (0x203): 0x0000000ffe000800 MTRRphysBase2 (0x204): 0x00000000e0000001 MTRRphysMask2 (0x205): 0x0000000ff0000800 MTRRphysBase3 (0x206): 0x0000000000000000 MTRRphysMask3 (0x207): 0x0000000000000000 MTRRphysBase4 (0x208): 0x0000000000000000 MTRRphysMask4 (0x209): 0x0000000000000000 MTRRphysBase5 (0x20a): 0x0000000000000000 MTRRphysMask5 (0x20b): 0x0000000000000000 MTRRphysBase6 (0x20c): 0x0000000000000000 MTRRphysMask6 (0x20d): 0x0000000000000000 MTRRphysBase7 (0x20e): 0x0000000000000000 MTRRphysMask7 (0x20f): 0x0000000000000000 MTRRfix64K_00000 (0x250): 0x0606060606060606 MTRRfix16K_80000 (0x258): 0x0606060606060606 MTRRfix16K_A0000 (0x259): 0x0000000000000000 MTRRfix4K_C8000 (0x269): 0x0505050505050505 MTRRfix4K_D0000 0x26a: 0x0000000000000000 MTRRfix4K_D8000 0x26b: 0x0000000000000000 MTRRfix4K_E0000 0x26c: 0x0505050505050505 MTRRfix4K_E8000 0x26d: 0x0505050505050505 MTRRfix4K_F0000 0x26e: 0x0505050505050505 MTRRfix4K_F8000 0x26f: 0x0505050505050505 MTRRdefType (0x2ff): 0x0000000000000c00 1.6Ghz processor (estimate). Linux version 2.6.0-test9-c1431 (root@vana) (gcc version 3.3.2 (Debian)) #2 Wed Nov 12 16:45:51 CET 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable) BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131008 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126912 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000ff980 ACPI: RSDT (v001 D845PT BG84510A 0x20020717 MSFT 0x00001011) @ 0x1fff0000 ACPI: FADT (v001 D845PT PT84510A 0x20020717 MSFT 0x00001011) @ 0x1fff1000 ACPI: MADT (v001 D845PT PT84510A 0x20020717 MSFT 0x00001011) @ 0x1ffe36fd ACPI: DSDT (v001 D845PT PT84510A 0x00000003 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x0] trigger[0x0] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=Linux ro root=301 ramdisk=0 video=matrox:vesa:0x117,fv:100,lower:1 video=matroxfb:vesa:0x117,fv:100,lower:1 video=scrollback:0 nmi_watchdog=2 psmouse_noext=1 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1595.660 MHz processor. Console: colour VGA+ 80x25 Memory: 513560k/524032k available (2523k kernel code, 9736k reserved, 952k data, 168k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3145.72 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K CPU: After all inits, caps: 3febfbf7 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available CPU#0: Thermal monitoring enabled CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 testing NMI watchdog ... OK. ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1594.0663 MHz. ..... host bus clock speed is 99.0666 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:0) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) SCSI subsystem initialized IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17 Mode:1 Active:1) 00:00:1f[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xb1 -> IRQ 23 Mode:1 Active:1) 00:00:1f[C] -> 2-23 -> IRQ 23 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19 Mode:1 Active:1) 00:00:1f[D] -> 2-19 -> IRQ 19 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16 Mode:1 Active:1) 00:00:01[A] -> 2-16 -> IRQ 16 Pin 2-17 already programmed Pin 2-17 already programmed IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc9 -> IRQ 20 Mode:1 Active:1) 00:02:08[A] -> 2-20 -> IRQ 20 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xd1 -> IRQ 21 Mode:1 Active:1) 00:02:09[A] -> 2-21 -> IRQ 21 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1) 00:02:09[B] -> 2-22 -> IRQ 22 Pin 2-23 already programmed Pin 2-17 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-17 already programmed Pin 2-21 already programmed Pin 2-23 already programmed Pin 2-17 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-17 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed Pin 2-17 already programmed Pin 2-17 already programmed Pin 2-21 already programmed Pin 2-22 already programmed Pin 2-23 already programmed IOAPIC[0]: Set PCI routing entry (2-18 -> 0xe1 -> IRQ 18 Mode:1 Active:1) 00:02:01[A] -> 2-18 -> IRQ 18 Pin 2-21 already programmed Pin 2-22 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' matroxfb: Matrox G550 detected matroxfb: MTRR's turned on matroxfb: 1024x768x16bpp (virtual: 1024x8190) matroxfb: framebuffer at 0xDA000000, mapped to 0xe0810000, size 33554432 Console: switching to colour frame buffer device 128x48 fb0: MATROX frame buffer device Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.13 ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU1] (supports C1) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 hw_random hardware driver 1.0.0 loaded i810 TCO timer init: failed to reset NO_REBOOT flag, reboot disabled by hardware Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel i845 Chipset. agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 256M @ 0xe0000000 [drm] Initialized mga 3.1.0 20021029 on minor 0 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Intel(R) PRO/100 Network Driver - version 2.3.30-k1 Copyright (c) 2003 Intel Corporation e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 5 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: WDC WD1200JB-00CRA0, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA MK6409MAV, ATA DISK drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdc: max request size: 128KiB hdc: 12685680 sectors (6495 MB), CHS=13424/15/63, UDMA(33) /dev/ide/host0/bus1/target0/lun0: p1 matroxfb_crtc2: secondary head of fb0 was registered as fb1 mice: PS/2 mouse device common for all mice input: PC Speaker input: PS/2 Generic Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 i2c /dev entries driver oprofile: using NMI interrupt. NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 NET: Registered protocol family 4 BIOS EDD facility v0.10 2003-Oct-11, 2 devices found Please report your BIOS at http://domsch.com/linux/edd30/results.html VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 168k freed Adding 1024120k swap on /dev/ide/host0/bus0/target0/lun0/part2. Priority:-1 extents:1 quotaon: numerical sysctl 5 16 8 is obsolete. e100: eth0 NIC Link is Up 100 Mbps Full duplex - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/