Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Fri, 28 Sep 2018 15:41:09 -0700
From:   Tony Lindgren <tony@atomide.com>
To:     Dmitry Osipenko <digetx@gmail.com>
Cc:     Maciej Purski <m.purski@samsung.com>,
        Mark Brown <broonie@kernel.org>, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
        Carlos Hernandez <ceh@ti.com>,
        Marek Szyprowski <m.szyprowski@samsung.com>
Subject: Re: [PATCH] regulator: core: Pass max_uV value to
 regulator_set_voltage_rdev
Message-ID: <20180928224109.GS5662@atomide.com>
References: <20180615112916.GK112168@atomide.com>
 <CGME20180618140856eucas1p281619f9bf003655a3c2eac356216ab25@eucas1p2.samsung.com>
 <1529330913-11152-1-git-send-email-m.purski@samsung.com>
 <20180702080505.GN112168@atomide.com>
 <95655644-ef41-f5bd-7e8e-a257d48cd020@gmail.com>
 <20180928202251.GM5662@atomide.com>
 <2c0132ff-ea0f-f19e-ebfb-a0d077565d2c@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <2c0132ff-ea0f-f19e-ebfb-a0d077565d2c@gmail.com>
User-Agent: Mutt/1.10.1 (2018-07-13)
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

* Dmitry Osipenko <digetx@gmail.com> [180928 22:31]:
> On 9/28/18 11:22 PM, Tony Lindgren wrote:
> > * Dmitry Osipenko <digetx@gmail.com> [180928 20:13]:
> >> Tony, could you please give a try to the patch below?
> >>
> >> Do the following:
> >>
> >> 1) git cherry-pick 696861761a58d8c93605b5663824929fb6540f16
> >> 2) git cherry-pick 456e7cdf3b1a14e2606b8b687385ab2e3f23a49a
> >> 3) Apply this patch:
> > 
> > Seems to be getting closer, system boots up and starts
> > init, but then I start getting tons of this on beagle-x15:
> 
> Tony, could you please try this one? Fixed couple more bugs, should be good now.

I'm still getting these errors after init:

[   29.008665] cpu cpu0: vbb failed for 1210000uV[min 950000uV max 1500000uV]
[   29.015987] cpu cpu0: vbb failed for 1060000uV[min 850000uV max 1500000uV]
[   29.022967] cpufreq: __target_index: Failed to change cpu frequency: -22
[   29.031993] cpu cpu0: vbb failed for 1210000uV[min 950000uV max 1500000uV]
[   29.038932] cpu cpu0: vbb failed for 1060000uV[min 850000uV max 1500000uV]
[   29.045962] cpufreq: __target_index: Failed to change cpu frequency: -22
[   29.055588] cpu cpu0: vbb failed for 1210000uV[min 950000uV max 1500000uV]
[   29.062639] cpu cpu0: vbb failed for 1060000uV[min 850000uV max 1500000uV]
[   29.069569] cpufreq: __target_index: Failed to change cpu frequency: -22
[   29.086215] cpu cpu0: vbb failed for 1210000uV[min 950000uV max 1500000uV]
[   29.093366] cpu cpu0: vbb failed for 1060000uV[min 850000uV max 1500000uV]
[   29.100295] cpufreq: __target_index: Failed to change cpu frequency: -22
[   29.110370] cpu cpu0: vbb failed for 1210000uV[min 950000uV max 1500000uV]
[   29.118402] cpu cpu0: vbb failed for 1060000uV[min 850000uV max 1500000uV]
[   29.125450] cpufreq: __target_index: Failed to change cpu frequency: -22
[   29.127884] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: GPIO lookup for consumer id
[   29.136112] cpu cpu0: vbb failed for 1210000uV[min 950000uV max 1500000uV]
[   29.140658] palmas-usb 48070000.i2c:tps659038@58:tps659038_usb: using device tree for GPIO lookup
[   29.147728] cpu cpu0: vbb failed for 1060000uV[min 850000uV max 1500000uV]
...

Regards,

Tony