Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S262960AbTKVX4X (ORCPT ); Sat, 22 Nov 2003 18:56:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263002AbTKVX4X (ORCPT ); Sat, 22 Nov 2003 18:56:23 -0500 Received: from attila.bofh.it ([213.92.8.2]:36054 "EHLO attila.bofh.it") by vger.kernel.org with ESMTP id S262960AbTKVX4M (ORCPT ); Sat, 22 Nov 2003 18:56:12 -0500 Date: Sun, 23 Nov 2003 00:55:39 +0100 From: "Marco d'Itri" To: linux-kernel@vger.kernel.org Subject: irq 15: nobody cared! with KT600 chipset and 2.6.0-test9 Message-ID: <20031122235539.GA14576@wonderland.linux.it> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8838 Lines: 206 This is an ASUS A7V600 motherboard, and the second IDE channel does not work at all. I verified that it works fine with a 2.4.x kernel. At boot time: kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 kernel: ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3 kernel: ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 7 kernel: ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5 kernel: ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 15 kernel: PCI: Using ACPI for IRQ routing [...] kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0 kernel: VIA8237SATA: chipset revision 128 kernel: VIA8237SATA: 100%% native mode on irq 3 kernel: ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio kernel: ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio kernel: VP_IDE: IDE controller at PCI slot 0000:00:0f.1 kernel: VP_IDE: chipset revision 6 kernel: VP_IDE: not 100%% native mode: will probe irqs later kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 kernel: ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA kernel: ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:DMA kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 kernel: hdc: IRQ probe failed (0x3cfa) kernel: hdc: CD-ROM 50X, ATAPI CD/DVD-ROM drive kernel: hdd: 32X10, ATAPI CD/DVD-ROM drive kernel: irq 15: nobody cared! kernel: Call Trace: kernel: [] __report_bad_irq+0x2b/0x90 kernel: [] note_interrupt+0x64/0xa0 kernel: [] do_IRQ+0xea/0xf0 kernel: [] common_interrupt+0x18/0x20 kernel: [] do_softirq+0x44/0xa0 kernel: [] do_IRQ+0xd1/0xf0 kernel: [] common_interrupt+0x18/0x20 kernel: [] setup_irq+0x64/0xb0 kernel: [] ide_intr+0x0/0x130 kernel: [] request_irq+0x7f/0xc0 kernel: [] init_irq+0x156/0x400 kernel: [] ide_intr+0x0/0x130 kernel: [] hwif_init+0xb8/0x250 kernel: [] probe_hwif_init+0x2c/0x80 kernel: [] ide_setup_pci_device+0x7a/0x80 kernel: [] via_init_one+0x3d/0x50 kernel: [] ide_scan_pcidev+0x5d/0x70 kernel: [] ide_scan_pcibus+0x46/0xd0 kernel: [] probe_for_hwifs+0x13/0x20 kernel: [] ide_init_builtin_drivers+0x8/0x20 kernel: [] ide_init+0x48/0x70 kernel: [] do_initcalls+0x2b/0xa0 kernel: [] init_workqueues+0x12/0x60 kernel: [] init+0x27/0x110 kernel: [] init+0x0/0x110 kernel: [] kernel_thread_helper+0x5/0xc kernel: kernel: handlers: kernel: [] (ide_intr+0x0/0x130) kernel: Disabling IRQ #15 kernel: ide1 at 0x170-0x177,0x376 on irq 15 And trying to mount a cdrom fails: kernel: hdc: lost interrupt kernel: hdc: lost interrupt kernel: irq 15: nobody cared! kernel: Call Trace: kernel: [] __report_bad_irq+0x2b/0x90 kernel: [] note_interrupt+0x64/0xa0 kernel: [] do_IRQ+0xea/0xf0 kernel: [] common_interrupt+0x18/0x20 kernel: [] ide_timer_expiry+0xdf/0x1b0 kernel: [] ide_timer_expiry+0x0/0x1b0 kernel: [] run_timer_softirq+0xb0/0x170 kernel: [] do_softirq+0x96/0xa0 kernel: [] do_IRQ+0xd1/0xf0 kernel: [] rest_init+0x0/0x30 kernel: [] common_interrupt+0x18/0x20 kernel: [] rest_init+0x0/0x30 kernel: [] default_idle+0x26/0x30 kernel: [] cpu_idle+0x34/0x40 kernel: [] start_kernel+0x140/0x150 kernel: [] unknown_bootoption+0x0/0x100 kernel: kernel: handlers: kernel: [] (ide_intr+0x0/0x130) kernel: Disabling IRQ #15 kernel: hdc: ATAPI 50X CD-ROM drive, 128kB Cache, UDMA(33) kernel: Uniform CD-ROM driver Revision: 3.12 kernel: hdc: lost interrupt last message repeated 2 times kernel: irq 15: nobody cared! kernel: Call Trace: kernel: [] __report_bad_irq+0x2b/0x90 kernel: [] note_interrupt+0x64/0xa0 kernel: [] do_IRQ+0xea/0xf0 kernel: [] common_interrupt+0x18/0x20 kernel: [] handle_IRQ_event+0x20/0x70 kernel: [] do_IRQ+0x7c/0xf0 kernel: [] common_interrupt+0x18/0x20 kernel: [] ide_timer_expiry+0xdf/0x1b0 kernel: [] ide_timer_expiry+0x0/0x1b0 kernel: [] run_timer_softirq+0xb0/0x170 kernel: [] do_softirq+0x96/0xa0 kernel: [] do_IRQ+0xd1/0xf0 kernel: [] rest_init+0x0/0x30 kernel: [] common_interrupt+0x18/0x20 kernel: [] rest_init+0x0/0x30 kernel: [] default_idle+0x26/0x30 kernel: [] cpu_idle+0x34/0x40 kernel: [] start_kernel+0x140/0x150 kernel: [] unknown_bootoption+0x0/0x100 kernel: kernel: handlers: kernel: [] (ide_intr+0x0/0x130) kernel: Disabling IRQ #15 [...] This also breaks a bit the mouse: kernel: psmouse.c: Wheel Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. CPU0 0: 3167529 XT-PIC timer 1: 8602 XT-PIC i8042 2: 0 XT-PIC cascade 3: 0 XT-PIC uhci_hcd, uhci_hcd 5: 0 XT-PIC ehci_hcd, VIA8233 7: 1 XT-PIC uhci_hcd, uhci_hcd 8: 5 XT-PIC rtc 9: 0 XT-PIC acpi 10: 12024 XT-PIC SysKonnect SK-98xx 11: 0 XT-PIC saa7134[0] 12: 50940 XT-PIC i8042 14: 31247 XT-PIC ide0 15: 1000005 XT-PIC ide1 NMI: 0 ERR: 0 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge (rev 80) 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge 00:09.0 Ethernet controller: 3Com Corporation 3c940 1000Base? (rev 12) 00:0a.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) 00:0f.0 RAID bus controller: VIA Technologies, Inc.: Unknown device 3149 (rev 80) 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) 00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 81) 00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 81) 00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 81) 00:10.3 USB Controller: VIA Technologies, Inc. USB (rev 81) 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) 00:10.5 Network controller: VIA Technologies, Inc.: Unknown device d104 00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3227 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 60) 01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5964 (rev 01) 01:00.1 Display controller: ATI Technologies Inc: Unknown device 5d44 (rev 01) ----------VIA BusMastering IDE Configuration---------------- Driver Version: 3.38 South Bridge: VIA vt8237 Revision: ISA 0x0 IDE 0x6 Highest DMA rate: UDMA133 BM-DMA base: 0x9400 PCI clock: 33.3MHz Master Read Cycle IRDY: 0ws Master Write Cycle IRDY: 0ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: yes no Post Write Buffer: yes no Enabled: yes yes Simplex only: no no Cable Type: 80w 80w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: UDMA UDMA UDMA DMA Address Setup: 120ns 120ns 120ns 120ns Cmd Active: 90ns 90ns 90ns 90ns Cmd Recovery: 30ns 30ns 30ns 30ns Data Active: 90ns 90ns 90ns 90ns Data Recovery: 30ns 30ns 30ns 30ns Cycle Time: 15ns 15ns 60ns 120ns Transfer Rate: 133.3MB/s 133.3MB/s 33.3MB/s 16.6MB/s -- ciao, | Marco | [3229 stHRfBoYMcR9Y] - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/