Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [PATCH v3 3/3] iio: magnetometer: Add driver support for PNI
 RM3100
To:     Song Qiang <songqiang1304521@gmail.com>, jic23@kernel.org,
        knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
        robh+dt@kernel.org, mark.rutland@arm.com,
        himanshujha199640@gmail.com
Cc:     linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
References: <20180925031724.21399-1-songqiang1304521@gmail.com>
 <20181002143812.3661-1-songqiang1304521@gmail.com>
 <20181002143812.3661-4-songqiang1304521@gmail.com>
From:   Phil Reid <preid@electromag.com.au>
Message-ID: <b73d2ff2-f93a-1268-67f9-08620f05770d@electromag.com.au>
Date:   Wed, 3 Oct 2018 09:42:14 +0800
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:52.0) Gecko/20100101
 Thunderbird/52.9.1
MIME-Version: 1.0
In-Reply-To: <20181002143812.3661-4-songqiang1304521@gmail.com>
Content-Type: text/plain; charset=utf-8; format=flowed
Content-Language: en-AU
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

G'day Song,

Noticed a one more thing below

On 2/10/2018 10:38 PM, Song Qiang wrote:
> PNI RM3100 is a high resolution, large signal immunity magnetometer,
> composed of 3 single sensors and a processing chip with a MagI2C
> interface.
> 
> Following functions are available:
>   - Single-shot measurement from
>     /sys/bus/iio/devices/iio:deviceX/in_magn_{axis}_raw
>   - Triggerd buffer measurement.
>   - Both i2c and spi interface are supported.
>   - Both interrupt and polling measurement is supported, depends on if
>     the 'interrupts' in DT is declared.
> 
> Signed-off-by: Song Qiang <songqiang1304521@gmail.com>


> ---
>   MAINTAINERS                            |   7 +
>   drivers/iio/magnetometer/Kconfig       |  29 ++
>   drivers/iio/magnetometer/Makefile      |   4 +
>   drivers/iio/magnetometer/rm3100-core.c | 539 +++++++++++++++++++++++++
>   drivers/iio/magnetometer/rm3100-i2c.c  |  58 +++
>   drivers/iio/magnetometer/rm3100-spi.c  |  64 +++
>   drivers/iio/magnetometer/rm3100.h      |  17 +
>   7 files changed, 718 insertions(+)
>   create mode 100644 drivers/iio/magnetometer/rm3100-core.c
>   create mode 100644 drivers/iio/magnetometer/rm3100-i2c.c
>   create mode 100644 drivers/iio/magnetometer/rm3100-spi.c
>   create mode 100644 drivers/iio/magnetometer/rm3100.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 967ce8cdd1cc..14eeeb072403 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11393,6 +11393,13 @@ M:	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
>   S:	Maintained
>   F:	drivers/pnp/
>   
> +PNI RM3100 IIO DRIVER
> +M:	Song Qiang <songqiang1304521@gmail.com>
> +L:	linux-iio@vger.kernel.org
> +S:	Maintained
> +F:	drivers/iio/magnetometer/rm3100*
> +F:	Documentation/devicetree/bindings/iio/magnetometer/pni,rm3100.txt
> +
>   POSIX CLOCKS and TIMERS
>   M:	Thomas Gleixner <tglx@linutronix.de>
>   L:	linux-kernel@vger.kernel.org
> diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
> index ed9d776d01af..8a63cbbca4b7 100644
> --- a/drivers/iio/magnetometer/Kconfig
> +++ b/drivers/iio/magnetometer/Kconfig
> @@ -175,4 +175,33 @@ config SENSORS_HMC5843_SPI
>   	  - hmc5843_core (core functions)
>   	  - hmc5843_spi (support for HMC5983)
>   
> +config SENSORS_RM3100
> +	tristate
> +	select IIO_BUFFER
> +	select IIO_TRIGGERED_BUFFER
> +
> +config SENSORS_RM3100_I2C
> +	tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
> +	depends on I2C
> +	select SENSORS_RM3100
> +	select REGMAP_I2C
> +	help
> +	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
> +
> +	  This driver can also be compiled as a module.
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called rm3100-i2c.
> +
> +config SENSORS_RM3100_SPI
> +	tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
> +	depends on SPI_MASTER
> +	select SENSORS_RM3100
> +	select REGMAP_SPI
> +	help
> +	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
> +
> +	  This driver can also be compiled as a module.
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called rm3100-spi.
> +
>   endmenu
> diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
> index 664b2f866472..ba1bc34b82fa 100644
> --- a/drivers/iio/magnetometer/Makefile
> +++ b/drivers/iio/magnetometer/Makefile
> @@ -24,3 +24,7 @@ obj-$(CONFIG_IIO_ST_MAGN_SPI_3AXIS) += st_magn_spi.o
>   obj-$(CONFIG_SENSORS_HMC5843)		+= hmc5843_core.o
>   obj-$(CONFIG_SENSORS_HMC5843_I2C)	+= hmc5843_i2c.o
>   obj-$(CONFIG_SENSORS_HMC5843_SPI)	+= hmc5843_spi.o
> +
> +obj-$(CONFIG_SENSORS_RM3100)		+= rm3100-core.o
> +obj-$(CONFIG_SENSORS_RM3100_I2C)	+= rm3100-i2c.o
> +obj-$(CONFIG_SENSORS_RM3100_SPI)	+= rm3100-spi.o
> diff --git a/drivers/iio/magnetometer/rm3100-core.c b/drivers/iio/magnetometer/rm3100-core.c
> new file mode 100644
> index 000000000000..cacdaee28ae3
> --- /dev/null
> +++ b/drivers/iio/magnetometer/rm3100-core.c
> @@ -0,0 +1,539 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PNI RM3100 3-axis geomagnetic sensor driver core.
> + *
> + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
> + *
> + * User Manual available at
> + * <https://www.pnicorp.com/download/rm3100-user-manual/>
> + *
> + * TODO: event generation, pm.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +
> +#include <linux/iio/buffer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/triggered_buffer.h>
> +#include <linux/iio/trigger_consumer.h>
> +
> +#include "rm3100.h"
> +
> +/* Cycle Count Registers. */
> +#define RM3100_REG_CC_X			0x05
> +#define RM3100_REG_CC_Y			0x07
> +#define RM3100_REG_CC_Z			0x09
> +
> +/* Continuous Measurement Mode register. */
> +#define RM3100_REG_CMM			0x01
> +#define		RM3100_CMM_START	BIT(0)
> +#define		RM3100_CMM_X		BIT(4)
> +#define		RM3100_CMM_Y		BIT(5)
> +#define		RM3100_CMM_Z		BIT(6)
> +
> +/* TiMe Rate Configuration register. */
> +#define RM3100_REG_TMRC			0x0B
> +#define RM3100_TMRC_OFFSET		0x92
> +
> +/* Result Status register. */
> +#define RM3100_REG_STATUS		0x34
> +#define		RM3100_STATUS_DRDY	BIT(7)
> +
> +/* Measurement result registers. */
> +#define RM3100_REG_MX2			0x24
> +#define RM3100_REG_MY2			0x27
> +#define RM3100_REG_MZ2			0x2a
> +
> +#define RM3100_W_REG_START		RM3100_REG_CMM
> +#define RM3100_W_REG_END		RM3100_REG_STATUS
> +#define RM3100_R_REG_START		RM3100_REG_CMM
> +#define RM3100_R_REG_END		RM3100_REG_STATUS
> +#define RM3100_V_REG_START		RM3100_REG_MX2
> +#define RM3100_V_REG_END		RM3100_REG_STATUS
> +
> +/*
> + * This is computed by hand, is the sum of channel storage bits and padding
> + * bits, which is 4+4+4+12=24 in here.
> + */
> +#define RM3100_SCAN_BYTES		24
> +
> +struct rm3100_data {
> +	struct regmap *regmap;
> +	struct completion measuring_done;
> +	bool use_interrupt;
> +
> +	int conversion_time;
> +	int cycle_count_index;
> +
> +	u8 buffer[RM3100_SCAN_BYTES];
> +
> +	/*
> +	 * This lock is for protecting the consistency of series of i2c
> +	 * operations, that is, to make sure a measurement process will
> +	 * not be interrupted by a set frequency operation, which should
> +	 * be taken where a series of i2c operation starts, released where
> +	 * the operation ends.
> +	 */
> +	struct mutex lock;
> +};
> +
> +static const struct regmap_range rm3100_readable_ranges[] = {
> +	regmap_reg_range(RM3100_W_REG_START, RM3100_W_REG_END),
> +};
> +
> +const struct regmap_access_table rm3100_readable_table = {
> +	.yes_ranges = rm3100_readable_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(rm3100_readable_ranges),
> +};
> +EXPORT_SYMBOL_GPL(rm3100_readable_table);
> +
> +static const struct regmap_range rm3100_writable_ranges[] = {
> +	regmap_reg_range(RM3100_R_REG_START, RM3100_R_REG_END),
> +};
> +
> +const struct regmap_access_table rm3100_writable_table = {
> +	.yes_ranges = rm3100_writable_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(rm3100_writable_ranges),
> +};
> +EXPORT_SYMBOL_GPL(rm3100_writable_table);
> +
> +static const struct regmap_range rm3100_volatile_ranges[] = {
> +	regmap_reg_range(RM3100_V_REG_START, RM3100_V_REG_END),
> +};
> +
> +const struct regmap_access_table rm3100_volatile_table = {
> +	.yes_ranges = rm3100_volatile_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(rm3100_volatile_ranges),
> +};
> +EXPORT_SYMBOL_GPL(rm3100_volatile_table);
> +
> +static irqreturn_t rm3100_irq_handler(int irq, void *d)
> +{
> +	struct rm3100_data *data = d;
> +
> +	complete(&data->measuring_done);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int rm3100_wait_measurement(struct rm3100_data *data)
> +{
> +	struct regmap *regmap = data->regmap;
> +	unsigned int val;
> +	int tries = 20;
> +	int ret;
> +
> +	/*
> +	 * A read cycle of 400kbits i2c bus is about 20us, plus the time
> +	 * used for scheduling, a read cycle of fast mode of this device
> +	 * can reach 1.7ms, it may be possible for data to arrive just
> +	 * after we check the RM3100_REG_STATUS. In this case, irq_handler is
> +	 * called before measuring_done is reinitialized, it will wait
> +	 * forever for data that has already been ready.
> +	 * Reinitialize measuring_done before looking up makes sure we
> +	 * will always capture interrupt no matter when it happens.
> +	 */
> +	if (data->use_interrupt)
> +		reinit_completion(&data->measuring_done);
> +
> +	ret = regmap_read(regmap, RM3100_REG_STATUS, &val);
> +	if (ret < 0)
> +		return ret;
> +
> +	if ((val & RM3100_STATUS_DRDY) != RM3100_STATUS_DRDY) {
> +		if (data->use_interrupt) {
> +			ret = wait_for_completion_timeout(&data->measuring_done,
> +				msecs_to_jiffies(data->conversion_time));
> +			if (ret < 0)
> +				return -ETIMEDOUT;
> +		} else {
> +			do {
> +				usleep_range(1000, 5000);
> +
> +				ret = regmap_read(regmap, RM3100_REG_STATUS,
> +						  &val);
> +				if (ret < 0)
> +					return ret;
> +
> +				if (val & RM3100_STATUS_DRDY)
> +					break;
> +			} while (--tries);
> +			if (!tries)
> +				return -ETIMEDOUT;
> +		}
> +	}
> +	return 0;
> +}
> +
> +static int rm3100_read_mag(struct rm3100_data *data, int idx, int *val)
> +{
> +	struct regmap *regmap = data->regmap;
> +	u8 buffer[3];
> +	int ret;
> +
> +	mutex_lock(&data->lock);
> +	ret = rm3100_wait_measurement(data);
> +	if (ret < 0) {
> +		mutex_unlock(&data->lock);
> +		return ret;
> +	}
> +
> +	ret = regmap_bulk_read(regmap, RM3100_REG_MX2 + 3 * idx, buffer, 3);
> +	mutex_unlock(&data->lock);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = sign_extend32((buffer[0] << 16) | (buffer[1] << 8) | buffer[2],
> +			     23);
> +
> +	return IIO_VAL_INT;
> +}
> +
> +#define RM3100_CHANNEL(axis, idx)					\
> +	{								\
> +		.type = IIO_MAGN,					\
> +		.modified = 1,						\
> +		.channel2 = IIO_MOD_##axis,				\
> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
> +		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |	\
> +			BIT(IIO_CHAN_INFO_SAMP_FREQ),			\
> +		.scan_index = idx,					\
> +		.scan_type = {						\
> +			.sign = 's',					\
> +			.realbits = 24,					\
> +			.storagebits = 32,				\
> +			.shift = 8,					\
> +			.endianness = IIO_BE,				\
> +		},							\
> +	}
> +
> +static const struct iio_chan_spec rm3100_channels[] = {
> +	RM3100_CHANNEL(X, 0),
> +	RM3100_CHANNEL(Y, 1),
> +	RM3100_CHANNEL(Z, 2),
> +	IIO_CHAN_SOFT_TIMESTAMP(3),
> +};
> +
> +static const unsigned long rm3100_scan_masks[] = {BIT(0) | BIT(1) | BIT(2), 0};
> +
> +static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
> +	"600 300 150 75 37 18 9 4.5 2.3 1.2 0.6 0.3 0.015 0.075"
> +);
> +
> +static struct attribute *rm3100_attributes[] = {
> +	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group rm3100_attribute_group = {
> +	.attrs = rm3100_attributes,
> +};
> +
> +#define RM3100_SAMP_NUM			14
> +
> +/*
> + * Frequency : rm3100_samp_rates[][0].rm3100_samp_rates[][1]Hz.
> + * Time between reading: rm3100_sam_rates[][2]ms.
> + * The first one is actually 1.7ms.
> + */
> +static const int rm3100_samp_rates[RM3100_SAMP_NUM][3] = {
> +	{600, 0, 2}, {300, 0, 3}, {150, 0, 7}, {75, 0, 13}, {37, 0, 27},
> +	{18, 0, 55}, {9, 0, 110}, {4, 500000, 220}, {2, 300000, 440},
> +	{1, 200000, 800}, {0, 600000, 1600}, {0, 300000, 3300},
> +	{0, 15000, 6700},  {0, 75000, 13000}
> +};
> +
> +static int rm3100_get_samp_freq(struct rm3100_data *data, int *val, int *val2)
> +{
> +	int ret;
> +	unsigned int tmp;
> +
> +	mutex_lock(&data->lock);
> +	ret = regmap_read(data->regmap, RM3100_REG_TMRC, &tmp);
> +	mutex_unlock(&data->lock);
> +	if (ret < 0)
> +		return ret;
> +	*val = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][0];
> +	*val2 = rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][1];
> +
> +	return IIO_VAL_INT_PLUS_MICRO;
> +}
> +
> +static int rm3100_set_cycle_count(struct rm3100_data *data, int val)
> +{
> +	int ret;
> +	u8 i;
> +
> +	for (i = 0; i < 3; i++) {
> +		ret = regmap_write(data->regmap, RM3100_REG_CC_X + 2 * i, val);
> +		if (ret < 0)
> +			return ret;
> +	}
> +
> +	switch (val) {
> +	case 50:
> +		data->cycle_count_index = 0;
> +		break;
> +	case 100:
> +		data->cycle_count_index = 1;
> +		break;
> +	/*
> +	 * This function will never be called by users' code, so here we
> +	 * assume that it will never get a wrong parameter.
> +	 */
> +	default:
> +		data->cycle_count_index = 2;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rm3100_set_samp_freq(struct rm3100_data *data, int val, int val2)
> +{
> +	struct regmap *regmap = data->regmap;
> +	unsigned int cycle_count;
> +	int ret;
> +	int i;
> +
> +	mutex_lock(&data->lock);
> +	/* All cycle count registers use the same value. */
> +	ret = regmap_read(regmap, RM3100_REG_CC_X, &cycle_count);
> +	if (ret < 0)
> +		goto unlock_return;
> +
> +	for (i = 0; i < RM3100_SAMP_NUM; i++) {
> +		if (val == rm3100_samp_rates[i][0] &&
> +		    val2 == rm3100_samp_rates[i][1])
> +			break;
> +	}
> +	if (i == RM3100_SAMP_NUM) {
> +		ret = -EINVAL;
> +		goto unlock_return;
> +	}
> +
> +	ret = regmap_write(regmap, RM3100_REG_TMRC, i + RM3100_TMRC_OFFSET);
> +	if (ret < 0)
> +		goto unlock_return;
> +
> +	/* Checking if cycle count registers need changing. */
> +	if (val == 600 && cycle_count == 200) {
> +		ret = rm3100_set_cycle_count(data, 100);
> +		if (ret < 0)
> +			goto unlock_return;
> +	} else if (val != 600 && cycle_count == 100) {
> +		ret = rm3100_set_cycle_count(data, 200);
> +		if (ret < 0)
> +			goto unlock_return;
> +	}
> +
> +	/* Writing TMRC registers requires CMM reset. */
> +	ret = regmap_write(regmap, RM3100_REG_CMM, 0);
> +	if (ret < 0)
> +		goto unlock_return;
> +	ret = regmap_write(regmap, RM3100_REG_CMM,
> +		RM3100_CMM_X | RM3100_CMM_Y | RM3100_CMM_Z | RM3100_CMM_START);
> +	if (ret < 0)
> +		goto unlock_return;
> +	mutex_unlock(&data->lock);
> +
> +	data->conversion_time = rm3100_samp_rates[i][2] + 3000;
> +	return 0;
> +
> +unlock_return:
> +	mutex_unlock(&data->lock);
> +	return ret;
> +}
> +
> +/*
> + * The scale of this sensor depends on the cycle count value, these three
> + * values are corresponding to the cycle count value 50, 100, 200.
> + * scale = output / gain * 10^4.
> + */
> +const static int rm3100_scale[] = {500, 263, 133};
> +
> +static int rm3100_read_raw(struct iio_dev *indio_dev,
> +			   const struct iio_chan_spec *chan,
> +			   int *val, int *val2, long mask)
> +{
> +	struct rm3100_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_RAW:
> +		ret = iio_device_claim_direct_mode(indio_dev);
> +		if (ret < 0)
> +			return ret;
> +
> +		ret = rm3100_read_mag(data, chan->scan_index, val);
> +		iio_device_release_direct_mode(indio_dev);
> +
> +		return ret;
> +	case IIO_CHAN_INFO_SCALE:
> +		*val = 0;
> +		*val2 = rm3100_scale[data->cycle_count_index];
> +
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		return rm3100_get_samp_freq(data, val, val2);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int rm3100_write_raw(struct iio_dev *indio_dev,
> +			    struct iio_chan_spec const *chan,
> +			    int val, int val2, long mask)
> +{
> +	struct rm3100_data *data = iio_priv(indio_dev);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		return rm3100_set_samp_freq(data, val, val2);
> +	default:
> +		return -EINVAL;
> +	}
> +
> +}
> +
> +static const struct iio_info rm3100_info = {
> +	.attrs = &rm3100_attribute_group,
> +	.read_raw = rm3100_read_raw,
> +	.write_raw = rm3100_write_raw,
> +};
> +
> +static irqreturn_t rm3100_trigger_handler(int irq, void *p)
> +{
> +	struct iio_poll_func *pf = p;
> +	struct iio_dev *indio_dev = pf->indio_dev;
> +	struct rm3100_data *data = iio_priv(indio_dev);
> +	struct regmap *regmap = data->regmap;
> +	int ret;
> +	int i;
> +
> +	mutex_lock(&data->lock);
> +	ret = rm3100_wait_measurement(data);
> +	if (ret < 0) {
> +		mutex_unlock(&data->lock);
> +		goto done;
> +	}
> +
> +	ret = regmap_bulk_read(regmap, RM3100_REG_MX2, data->buffer, 9);
> +	mutex_unlock(&data->lock);
> +	if (ret < 0)
> +		goto done;
> +
> +	/* Convert XXXYYYZZZxxx to XXXxYYYxZZZx. x for paddings. */
> +	for (i = 0; i < 2; i++)
> +		memcpy(data->buffer + (2 - i) * 4, data->buffer + (2 - i) * 3,
> +		       3);
> +
> +	/*
> +	 * Always using the same buffer so that we wouldn't need to set the
> +	 * paddings to 0 in case of leaking any data.
> +	 */
> +	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
> +					   iio_get_time_ns(indio_dev));
> +
> +done:
> +	iio_trigger_notify_done(indio_dev->trig);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void rm3100_remove(void *pdata)
> +{
> +	struct rm3100_data *data = pdata;
> +	struct device *dev = regmap_get_device(data->regmap);
> +	int ret;
> +
> +	ret = regmap_write(data->regmap, RM3100_REG_CMM, 0x00);
> +	if (ret < 0)
> +		dev_err(dev, "failed to stop the device.\n");
> +}
> +
> +int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq)
> +{
> +	struct iio_dev *indio_dev;
> +	struct rm3100_data *data;
> +	unsigned int tmp;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	data->regmap = regmap;
> +
> +	mutex_init(&data->lock);
> +
> +	indio_dev->dev.parent = dev;
> +	indio_dev->name = "rm3100";
> +	indio_dev->info = &rm3100_info;
> +	indio_dev->channels = rm3100_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(rm3100_channels);
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +	indio_dev->available_scan_masks = rm3100_scan_masks;
> +
> +	if (!irq)
> +		data->use_interrupt = false;
> +	else {
> +		data->use_interrupt = true;
> +		ret = devm_request_irq(dev,
> +				       irq,
> +				       rm3100_irq_handler,
> +				       IRQF_TRIGGER_RISING,
> +				       indio_dev->name,
> +				       data);

Assuming the irq source is the DRDY pin, this pin is active high.
Which is automatically cleared when reading the measurement results register.

Perhaps when using interrupts the irq handler should do the read into data->buffer
to clear the irq. Would need to use devm_request_threaded_irq instead.

The SOC irq block I use doesn't support edge triggered irqs, so this currently wouldn't work if
DRDY was connected to that.


> +		if (ret < 0) {
> +			dev_err(dev, "request irq line failed.\n");
> +			return ret;
> +		}
> +		init_completion(&data->measuring_done);
> +	}
> +
> +	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
> +					      rm3100_trigger_handler, NULL);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_read(regmap, RM3100_REG_TMRC, &tmp);
> +	if (ret < 0)
> +		return ret;
> +	/* Initializing max wait time, 3sec more wait time for conversion. */
> +	data->conversion_time =
> +		rm3100_samp_rates[tmp - RM3100_TMRC_OFFSET][2] + 3000;
> +
> +	/* Cycle count values may not be what we want. */
> +	ret = regmap_read(data->regmap, RM3100_REG_TMRC, &tmp);
> +	if (ret < 0)
> +		return ret;
> +	if ((tmp - RM3100_TMRC_OFFSET) == 0)
> +		rm3100_set_cycle_count(data, 100);
> +	else
> +		rm3100_set_cycle_count(data, 200);
> +
> +	/* Starting all channels' conversion. */
> +	ret = regmap_write(regmap, RM3100_REG_CMM,
> +		RM3100_CMM_X | RM3100_CMM_Y | RM3100_CMM_Z | RM3100_CMM_START);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = devm_add_action(dev, rm3100_remove, data);
> +	if (ret < 0) {
> +		rm3100_remove(data);
> +		return ret;
> +	}
> +
> +	return devm_iio_device_register(dev, indio_dev);
> +}
> +EXPORT_SYMBOL_GPL(rm3100_common_probe);
> +
> +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
> +MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer i2c driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/magnetometer/rm3100-i2c.c b/drivers/iio/magnetometer/rm3100-i2c.c
> new file mode 100644
> index 000000000000..8f02e0366886
> --- /dev/null
> +++ b/drivers/iio/magnetometer/rm3100-i2c.c
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for PNI RM3100 3-axis geomagnetic sensor on a i2c bus.
> + *
> + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
> + *
> + * i2c slave address: 0x20 + SA1 << 1 + SA0.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +
> +#include "rm3100.h"
> +
> +static const struct regmap_config rm3100_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.rd_table = &rm3100_readable_table,
> +	.wr_table = &rm3100_writable_table,
> +	.volatile_table = &rm3100_volatile_table,
> +
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int rm3100_probe(struct i2c_client *client)
> +{
> +	struct regmap *regmap;
> +
> +	if (!i2c_check_functionality(client->adapter,
> +		I2C_FUNC_SMBUS_READ_I2C_BLOCK | I2C_FUNC_SMBUS_BYTE_DATA))
> +		return -EOPNOTSUPP;
> +
> +	regmap =  devm_regmap_init_i2c(client, &rm3100_regmap_config);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	return rm3100_common_probe(&client->dev, regmap, client->irq);
> +}
> +
> +static const struct of_device_id rm3100_dt_match[] = {
> +	{ .compatible = "pni,rm3100", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, rm3100_dt_match);
> +
> +static struct i2c_driver rm3100_driver = {
> +	.driver = {
> +		.name = "rm3100-i2c",
> +		.of_match_table = rm3100_dt_match,
> +	},
> +	.probe_new = rm3100_probe,
> +};
> +module_i2c_driver(rm3100_driver);
> +
> +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
> +MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer i2c driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/magnetometer/rm3100-spi.c b/drivers/iio/magnetometer/rm3100-spi.c
> new file mode 100644
> index 000000000000..65d5eb9e4f5e
> --- /dev/null
> +++ b/drivers/iio/magnetometer/rm3100-spi.c
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Support for PNI RM3100 3-axis geomagnetic sensor on a spi bus.
> + *
> + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +
> +#include "rm3100.h"
> +
> +static const struct regmap_config rm3100_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.rd_table = &rm3100_readable_table,
> +	.wr_table = &rm3100_writable_table,
> +	.volatile_table = &rm3100_volatile_table,
> +
> +	.read_flag_mask = 0x80,
> +
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int rm3100_probe(struct spi_device *spi)
> +{
> +	struct regmap *regmap;
> +	int ret;
> +
> +	/* Actually this device supports both mode 0 and mode 3. */
> +	spi->mode = SPI_MODE_0;
> +	/* Data rates cannot exceed 1Mbits. */
> +	spi->max_speed_hz = 1000000;
> +	spi->bits_per_word = 8;
> +	ret = spi_setup(spi);
> +	if (ret)
> +		return ret;
> +
> +	regmap = devm_regmap_init_spi(spi, &rm3100_regmap_config);
> +	if (IS_ERR(regmap))
> +		return PTR_ERR(regmap);
> +
> +	return rm3100_common_probe(&spi->dev, regmap, spi->irq);
> +}
> +
> +static const struct of_device_id rm3100_dt_match[] = {
> +	{ .compatible = "pni,rm3100", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, rm3100_dt_match);
> +
> +static struct spi_driver rm3100_driver = {
> +	.driver = {
> +		.name = "rm3100-spi",
> +		.of_match_table = rm3100_dt_match,
> +	},
> +	.probe = rm3100_probe,
> +};
> +module_spi_driver(rm3100_driver);
> +
> +MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
> +MODULE_DESCRIPTION("PNI RM3100 3-axis magnetometer spi driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/magnetometer/rm3100.h b/drivers/iio/magnetometer/rm3100.h
> new file mode 100644
> index 000000000000..c3508218bc77
> --- /dev/null
> +++ b/drivers/iio/magnetometer/rm3100.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
> + */
> +
> +#ifndef RM3100_CORE_H
> +#define RM3100_CORE_H
> +
> +#include <linux/regmap.h>
> +
> +extern const struct regmap_access_table rm3100_readable_table;
> +extern const struct regmap_access_table rm3100_writable_table;
> +extern const struct regmap_access_table rm3100_volatile_table;
> +
> +int rm3100_common_probe(struct device *dev, struct regmap *regmap, int irq);
> +
> +#endif /* RM3100_CORE_H */
> 


-- 
Regards
Phil Reid

ElectroMagnetic Imaging Technology Pty Ltd
Development of Geophysical Instrumentation & Software
www.electromag.com.au

3 The Avenue, Midland WA 6056, AUSTRALIA
Ph: +61 8 9250 8100
Fax: +61 8 9250 7100
Email: preid@electromag.com.au