Date: Mon, 24 Nov 2003 09:42:06 -0500
From: Greg Berenfield <gberenfield@handhelds.org>
To: linux-kernel@vger.kernel.org
Subject: Re: test10, hangs at aic79xx probing
Message-ID: <20031124144206.GB9487@mutt.org>
References: <1069679516.4862.27.camel@lomin>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <1069679516.4862.27.camel@lomin>
User-Agent: Mutt/1.5.4i
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 49407
Lines: 1963

On Mon, Nov 24, 2003 at 02:11:57PM +0100, Birger T?dtmann wrote:
> maple@maple wrote on Mon, 24 Nov 2003, at 12:08:26 +0200:
> > machine hangs just after
> >
> > hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63,
> UDMA(100)
> > hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
> [...]
> 
> 
> Hello,
> 
> this seems to be unrelated to the SCSI code because my system hangs as
> well at the same point without having SCSI devices initialized.  I
> attached a ring buffer output of my test9 (which works perfectly apart
> from some APM related hickups) where the "-->" indicates the points
> where test10 simply stops - no no oops, no panic, nothing more to see. 
> I waited some minutes at the first boot and restarted several times,
> with the same result every time.
> 
> My system is a Dell Inspiron 8100, with 1G main memory and an Intel
> 1.60GHz CPU.  The attached .config is for test10, but gotten from test9
> and pushed through a "make oldconfig".  The diff shows that the ATA 
> tagged command qeueing disappeared, which might be the cause of the
> problems:
> 

I have an inspiron 8200 and see the same problem.
First had boot lockups at ide device detection since 2.6.0-test9-mm5.

Just another datapoint,
Greg

> 
>   $ diff -u linux-2.6.0-test9/.config linux-2.6.0-test10/.config
>   --- linux-2.6.0-test9/.config   2003-11-10 07:17:56.000000000 +0100
>   +++ linux-2.6.0-test10/.config  2003-11-24 11:32:40.000000000 +0100
>   @@ -353,9 +353,6 @@
>    # CONFIG_BLK_DEV_OPTI621 is not set
>    CONFIG_BLK_DEV_RZ1000=y
>    CONFIG_BLK_DEV_IDEDMA_PCI=y
>   -CONFIG_BLK_DEV_IDE_TCQ=y
>   -CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
>   -CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8
>    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
>    CONFIG_IDEDMA_PCI_AUTO=y
>    # CONFIG_IDEDMA_ONLYDISK is not set
>  
> 
> Where did it go?  The Changelog is somewhat obscure on this:
> 
>   [...]
>   akpm@osdl.org>
>   [PATCH] Disable IDE Tagged Command Queueing
> 
>   It's not ready for prime time yet, so hide it until the additional 
>   work has been done.
>   [...]
> 
> 
> Regards,
> 
> Birger
> 
> 
> 
> ######## dmesg output ########
> Linux version 2.6.0-test9 (root@lomin.exp-math.uni-essen.de) (gcc
> version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r2, propolice)) #4 Mon
> Nov 10 07:18:59 CET 2003
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000003ffe2800 (usable)
>  BIOS-e820: 000000003ffe2800 - 0000000040000000 (reserved)
>  BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
>  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
> Warning only 896MB will be used.
> Use a HIGHMEM enabled kernel.
> 896MB LOWMEM available.
> On node 0 totalpages: 229376
>   DMA zone: 4096 pages, LIFO batch:1
>   Normal zone: 225280 pages, LIFO batch:16
>   HighMem zone: 0 pages, LIFO batch:1
> DMI 2.3 present.
> Dell Inspiron with broken BIOS detected. Refusing to enable the local
> APIC.
> Building zonelist for node : 0
> Kernel command line: vga=0x346 hdb=ide-scsi root=/dev/hda10
> ide_setup: hdb=ide-scsi
> Initializing CPU#0
> PID hash table entries: 4096 (order 12: 32768 bytes)
> Detected 1595.333 MHz processor.
> Console: colour dummy device 80x25
> Memory: 903280k/917504k available (2627k kernel code, 13444k reserved,
> 1088k data, 204k init, 0k highmem)
> Calibrating delay loop... 3145.72 BogoMIPS
> Security Scaffold v1.0.0 initialized
> Capability LSM initialized
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU:     After generic identify, caps: 3febf9ff 00000000 00000000
> 00000000
> CPU:     After vendor identify, caps: 3febf9ff 00000000 00000000
> 00000000
> CPU: Trace cache: 12K uops, L1 D cache: 8K
> CPU: L2 cache: 512K
> CPU:     After all inits, caps: 3febf9ff 00000000 00000000 00000080
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU#0: Thermal monitoring enabled
> CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz stepping 04
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> PnPBIOS: Scanning system for PnP BIOS support...
> PnPBIOS: Found PnP BIOS installation structure at 0xc00fe2d0
> PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xe2f4, dseg 0x40
> PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
> SCSI subsystem initialized
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> Transparent bridge - 0000:00:1e.0
> PCI: Discovered primary peer bus 08 [IRQ]
> PCI: Using IRQ router PIIX [8086/248c] at 0000:00:1f.0
> PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try
> pci=usepirqmask
> PCI: Found IRQ 11 for device 0000:00:1f.1
> PCI: Sharing IRQ 11 with 0000:00:1d.2
> PCI: Sharing IRQ 11 with 0000:02:00.0
> vesafb: framebuffer at 0xe0000000, mapped to 0xf8800000, size 16384k
> vesafb: mode is 1600x1200x16, linelength=3200, pages=1
> vesafb: protected mode interface info at c000:e140
> vesafb: scrolling: redraw
> vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
> fb0: VESA VGA frame buffer device
> Machine check exception polling timer started.
> IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> ikconfig 0.7 with /proc/config*
> devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
> devfs: boot_options: 0x0
> NTFS driver 2.1.4 [Flags: R/O].
> Initializing Cryptographic API
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Console: switching to colour frame buffer device 200x75
> pty: 256 Unix98 ptys configured
> request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16
> lp: driver loaded but no devices found
> Real Time Clock Driver v1.12
> Non-volatile memory driver v1.2
> hw_random hardware driver 1.0.0 loaded
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected an Intel i845 Chipset.
> agpgart: Maximum main memory to use for agp memory: 816M
> agpgart: AGP aperture is 64M @ 0xe8000000
> [drm] Initialized tdfx 1.0.0 20010216 on minor 0
> [drm] Initialized r128 2.5.0 20030725 on minor 1
> [drm] Initialized radeon 1.9.0 20020828 on minor 2
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
> PCI: Found IRQ 11 for device 0000:00:1f.6
> PCI: Sharing IRQ 11 with 0000:00:1f.5
> Using anticipatory io scheduler
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> loop: loaded (max 8 devices)
> nbd: registered device at major 43
> Linux video capture interface: v1.00
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> ICH3M: IDE controller at PCI slot 0000:00:1f.1
> PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
> PCI: Found IRQ 11 for device 0000:00:1f.1
> PCI: Sharing IRQ 11 with 0000:00:1d.2
> PCI: Sharing IRQ 11 with 0000:02:00.0
> ICH3M: chipset revision 2
> ICH3M: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xbfa0-0xbfa7, BIOS settings: hda:DMA, hdb:DMA
> 
> ----> just once, test10 even stopped here <----
> 
> hda: IC25N040ATCS04-0, ATA DISK drive
> 
> ---->  here test10 always stopps <----
> 
> hdb: SONY CD-RW/DVD-ROM CRX810E, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide2: I/O resource 0x3EE-0x3EE not free.
> ide2: ports already in use, skipping probe
> hda: max request size: 128KiB
> hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63,
> UDMA(100)
> hda: only one drive on a channel supported for tcq
>  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 >
> ide-floppy driver 0.99.newide
> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
>   Vendor: SONY      Model: CD-RW  CRX810E    Rev: 1.4c
>   Type:   CD-ROM                             ANSI SCSI revision: 02
> st: Version 20030811, fixed bufsize 32768, s/g segs 256
> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.12
> [...]
> ######## end dmesg output ##########
> 
> ######## .config of test10 #########
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_MMU=y
> CONFIG_UID16=y
> CONFIG_GENERIC_ISA_DMA=y
>  
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
> CONFIG_BROKEN_ON_SMP=y
>  
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> CONFIG_SYSCTL=y
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_IKCONFIG=y
> CONFIG_IKCONFIG_PROC=y
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
>  
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> CONFIG_MODULE_FORCE_UNLOAD=y
> CONFIG_OBSOLETE_MODPARM=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>  
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VOYAGER is not set
> # CONFIG_X86_NUMAQ is not set
> # CONFIG_X86_SUMMIT is not set
> # CONFIG_X86_BIGSMP is not set
> # CONFIG_X86_VISWS is not set
> # CONFIG_X86_GENERICARCH is not set
> # CONFIG_X86_ES7000 is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_X86_GENERIC is not set
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_INTEL_USERCOPY=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> # CONFIG_SMP is not set
> CONFIG_PREEMPT=y
> CONFIG_X86_UP_APIC=y
> CONFIG_X86_UP_IOAPIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_TSC=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_NONFATAL=y
> CONFIG_X86_MCE_P4THERMAL=y
> # CONFIG_TOSHIBA is not set
> CONFIG_I8K=m
> CONFIG_MICROCODE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_EDD is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> CONFIG_HAVE_DEC_LOCK=y
>  
> #
> # Power management options (ACPI, APM)
> #
> CONFIG_PM=y
> # CONFIG_SOFTWARE_SUSPEND is not set
> # CONFIG_PM_DISK is not set
>  
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> # CONFIG_ACPI is not set
>  
> #
> # APM (Advanced Power Management) BIOS Support
> #
> CONFIG_APM=y
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> CONFIG_APM_DO_ENABLE=y
> CONFIG_APM_CPU_IDLE=y
> CONFIG_APM_DISPLAY_BLANK=y
> CONFIG_APM_RTC_IS_GMT=y
> CONFIG_APM_ALLOW_INTS=y
> # CONFIG_APM_REAL_MODE_POWER_OFF is not set
>  
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> # CONFIG_CPU_FREQ_PROC_INTF is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=m
> # CONFIG_CPU_FREQ_24_API is not set
> CONFIG_CPU_FREQ_TABLE=m
>  
> #
> # CPUFreq processor drivers
> #
> # CONFIG_X86_POWERNOW_K6 is not set
> # CONFIG_X86_POWERNOW_K7 is not set
> # CONFIG_X86_POWERNOW_K8 is not set
> # CONFIG_X86_GX_SUSPMOD is not set
> # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
> CONFIG_X86_SPEEDSTEP_ICH=m
> CONFIG_X86_SPEEDSTEP_SMI=m
> CONFIG_X86_SPEEDSTEP_LIB=m
> CONFIG_X86_P4_CLOCKMOD=m
> # CONFIG_X86_LONGRUN is not set
> # CONFIG_X86_LONGHAUL is not set
>  
> #
> # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
> #
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> # CONFIG_PCI_LEGACY_PROC is not set
> CONFIG_PCI_NAMES=y
> # CONFIG_ISA is not set
> # CONFIG_MCA is not set
> # CONFIG_SCx200 is not set
> CONFIG_HOTPLUG=y
>  
> #
> # PCMCIA/CardBus support
> #
> CONFIG_PCMCIA=m
> CONFIG_YENTA=m
> CONFIG_CARDBUS=y
> CONFIG_I82092=m
> # CONFIG_TCIC is not set
>  
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
>  
> #
> # Executable file formats
> #
> CONFIG_BINFMT_ELF=y
> # CONFIG_BINFMT_AOUT is not set
> CONFIG_BINFMT_MISC=m
>  
> #
> # Device Drivers
> #
>  
> #
> # Generic Driver Options
> #
> # CONFIG_FW_LOADER is not set
>  
> #
> # Memory Technology Devices (MTD)
> #
> CONFIG_MTD=m
> # CONFIG_MTD_DEBUG is not set
> # CONFIG_MTD_PARTITIONS is not set
> # CONFIG_MTD_CONCAT is not set
>  
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> # CONFIG_NFTL is not set
> # CONFIG_INFTL is not set
>  
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> # CONFIG_MTD_CFI_STAA is not set
> CONFIG_MTD_RAM=m
> CONFIG_MTD_ROM=m
> CONFIG_MTD_ABSENT=m
> CONFIG_MTD_OBSOLETE_CHIPS=y
> CONFIG_MTD_AMDSTD=m
> CONFIG_MTD_SHARP=m
> CONFIG_MTD_JEDEC=m
>  
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> CONFIG_MTD_PHYSMAP=m
> CONFIG_MTD_PHYSMAP_START=0x8000000
> CONFIG_MTD_PHYSMAP_LEN=0x4000000
> CONFIG_MTD_PHYSMAP_BUSWIDTH=2
> # CONFIG_MTD_SC520CDP is not set
> # CONFIG_MTD_SCx200_DOCFLASH is not set
> # CONFIG_MTD_AMD76XROM is not set
> # CONFIG_MTD_SCB2_FLASH is not set
> # CONFIG_MTD_L440GX is not set
>                                                                                                     
> #
> # Self-contained MTD device drivers
> #
> # CONFIG_MTD_PMC551 is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_MTDRAM is not set
> # CONFIG_MTD_BLKMTD is not set
>                                                                                                     
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
>                                                                                                     
> #
> # NAND Flash Device Drivers
> #
> # CONFIG_MTD_NAND is not set
>                                                                                                     
> #
> # Parallel port support
> #
> CONFIG_PARPORT=y
> CONFIG_PARPORT_PC=y
> CONFIG_PARPORT_PC_CML1=y
> # CONFIG_PARPORT_SERIAL is not set
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_PC_PCMCIA is not set
> # CONFIG_PARPORT_OTHER is not set
> # CONFIG_PARPORT_1284 is not set
>                                                                                                     
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>                                                                                                     
> #
> # Protocols
> #
> CONFIG_ISAPNP=y
> CONFIG_PNPBIOS=y
>                                                                                                     
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> CONFIG_BLK_DEV_LOOP=y
> CONFIG_BLK_DEV_CRYPTOLOOP=y
> CONFIG_BLK_DEV_NBD=y
> CONFIG_BLK_DEV_RAM=m
> CONFIG_BLK_DEV_RAM_SIZE=4096
> # CONFIG_BLK_DEV_INITRD is not set
> # CONFIG_LBD is not set
>                                                                                                     
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>                                                                                                     
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> # CONFIG_IDEDISK_STROKE is not set
> # CONFIG_BLK_DEV_IDECS is not set
> CONFIG_BLK_DEV_IDECD=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> CONFIG_BLK_DEV_IDEFLOPPY=y
> CONFIG_BLK_DEV_IDESCSI=y
> # CONFIG_IDE_TASK_IOCTL is not set
> CONFIG_IDE_TASKFILE_IO=y
>  
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_BLK_DEV_CMD640=y
> # CONFIG_BLK_DEV_CMD640_ENHANCED is not set
> # CONFIG_BLK_DEV_IDEPNP is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> CONFIG_BLK_DEV_RZ1000=y
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> # CONFIG_IDEDMA_PCI_WIP is not set
> CONFIG_BLK_DEV_ADMA=y
> # CONFIG_BLK_DEV_AEC62XX is not set
> # CONFIG_BLK_DEV_ALI15X3 is not set
> # CONFIG_BLK_DEV_AMD74XX is not set
> # CONFIG_BLK_DEV_CMD64X is not set
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> # CONFIG_BLK_DEV_HPT34X is not set
> # CONFIG_BLK_DEV_HPT366 is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_NS87415 is not set
> # CONFIG_BLK_DEV_PDC202XX_OLD is not set
> # CONFIG_BLK_DEV_PDC202XX_NEW is not set
> # CONFIG_BLK_DEV_SVWKS is not set
> # CONFIG_BLK_DEV_SIIMAGE is not set
> # CONFIG_BLK_DEV_SIS5513 is not set
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_HD is not set
>  
> #
> # SCSI device support
> #
> CONFIG_SCSI=y
> CONFIG_SCSI_PROC_FS=y
>  
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_CHR_DEV_ST=y
> # CONFIG_CHR_DEV_OSST is not set
> CONFIG_BLK_DEV_SR=y
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_CHR_DEV_SG=y
>  
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_REPORT_LUNS=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
>  
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AACRAID is not set
> 
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=253
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_PROBE_EISA_VL is not set
> # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> # CONFIG_SCSI_AIC7XXX_OLD is not set
> # CONFIG_SCSI_AIC79XX is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_SATA is not set
> CONFIG_SCSI_BUSLOGIC=y
> # CONFIG_SCSI_OMIT_FLASHPOINT is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> CONFIG_SCSI_SYM53C8XX_2=y
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_NSP32 is not set
> # CONFIG_SCSI_DEBUG is not set
>  
> #
> # PCMCIA SCSI adapter support
> #
> # CONFIG_PCMCIA_AHA152X is not set
> # CONFIG_PCMCIA_FDOMAIN is not set
> # CONFIG_PCMCIA_NINJA_SCSI is not set
> # CONFIG_PCMCIA_QLOGIC is not set
>  
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>  
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
>  
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> CONFIG_IEEE1394=m
>  
> #
> # Subsystem Options
> #
> # CONFIG_IEEE1394_VERBOSEDEBUG is not set
> # CONFIG_IEEE1394_OUI_DB is not set
>  
> #
> # Device Drivers
> #
>  
> #
> # Texas Instruments PCILynx requires I2C bit-banging
> #
> CONFIG_IEEE1394_OHCI1394=m
>  
> #
> # Protocol Drivers
> #
> CONFIG_IEEE1394_VIDEO1394=m
> CONFIG_IEEE1394_SBP2=m
> CONFIG_IEEE1394_SBP2_PHYS_DMA=y
> CONFIG_IEEE1394_ETH1394=m
> CONFIG_IEEE1394_DV1394=m
> CONFIG_IEEE1394_RAWIO=m
> CONFIG_IEEE1394_CMP=m
> CONFIG_IEEE1394_AMDTP=m
>  
> #
> # I2O device support
> #
> CONFIG_I2O=m
> CONFIG_I2O_PCI=m
> CONFIG_I2O_BLOCK=m
> CONFIG_I2O_SCSI=m
> CONFIG_I2O_PROC=m
>  
> #
> # Networking support
> #
> CONFIG_NET=y
>  
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_NETLINK_DEV=y
> CONFIG_UNIX=y
> CONFIG_NET_KEY=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_FWMARK=y
> CONFIG_IP_ROUTE_NAT=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_TOS=y
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> # CONFIG_NET_IPGRE_BROADCAST is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_ARPD is not set
> CONFIG_INET_ECN=y
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=y
> CONFIG_INET_ESP=y
> CONFIG_INET_IPCOMP=y
>  
> #
> # IP: Virtual Server Configuration
> #
> # CONFIG_IP_VS is not set
> CONFIG_IPV6=m
> CONFIG_IPV6_PRIVACY=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> CONFIG_IPV6_TUNNEL=m
> # CONFIG_DECNET is not set
> CONFIG_BRIDGE=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_BRIDGE_NETFILTER=y
>  
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=y
> CONFIG_IP_NF_FTP=y
> # CONFIG_IP_NF_IRC is not set
> CONFIG_IP_NF_TFTP=y
> # CONFIG_IP_NF_AMANDA is not set
> CONFIG_IP_NF_QUEUE=y
> CONFIG_IP_NF_IPTABLES=y
> CONFIG_IP_NF_MATCH_LIMIT=y
> CONFIG_IP_NF_MATCH_IPRANGE=y
> CONFIG_IP_NF_MATCH_MAC=y
> CONFIG_IP_NF_MATCH_PKTTYPE=y
> CONFIG_IP_NF_MATCH_MARK=y
> CONFIG_IP_NF_MATCH_MULTIPORT=y
> CONFIG_IP_NF_MATCH_TOS=y
> CONFIG_IP_NF_MATCH_RECENT=y
> CONFIG_IP_NF_MATCH_ECN=y
> CONFIG_IP_NF_MATCH_DSCP=y
> CONFIG_IP_NF_MATCH_AH_ESP=y
> CONFIG_IP_NF_MATCH_LENGTH=y
> CONFIG_IP_NF_MATCH_TTL=y
> CONFIG_IP_NF_MATCH_TCPMSS=y
> CONFIG_IP_NF_MATCH_HELPER=y
> CONFIG_IP_NF_MATCH_STATE=y
> CONFIG_IP_NF_MATCH_CONNTRACK=y
> CONFIG_IP_NF_MATCH_OWNER=y
> CONFIG_IP_NF_MATCH_PHYSDEV=y
> CONFIG_IP_NF_FILTER=y
> CONFIG_IP_NF_TARGET_REJECT=y
> CONFIG_IP_NF_NAT=y
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=y
> CONFIG_IP_NF_TARGET_REDIRECT=y
> CONFIG_IP_NF_TARGET_NETMAP=y
> CONFIG_IP_NF_TARGET_SAME=y
> CONFIG_IP_NF_NAT_LOCAL=y
> CONFIG_IP_NF_NAT_SNMP_BASIC=y
> CONFIG_IP_NF_NAT_FTP=y
> CONFIG_IP_NF_NAT_TFTP=y
> CONFIG_IP_NF_MANGLE=y
> CONFIG_IP_NF_TARGET_TOS=y
> CONFIG_IP_NF_TARGET_ECN=y
> CONFIG_IP_NF_TARGET_DSCP=y
> CONFIG_IP_NF_TARGET_MARK=y
> CONFIG_IP_NF_TARGET_CLASSIFY=y
> CONFIG_IP_NF_TARGET_LOG=y
> CONFIG_IP_NF_TARGET_ULOG=y
> CONFIG_IP_NF_TARGET_TCPMSS=y
> CONFIG_IP_NF_ARPTABLES=y
> CONFIG_IP_NF_ARPFILTER=y
> CONFIG_IP_NF_ARP_MANGLE=y
>  
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_IP6_NF_QUEUE=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_LIMIT=m
> CONFIG_IP6_NF_MATCH_MAC=m
> CONFIG_IP6_NF_MATCH_RT=m
> CONFIG_IP6_NF_MATCH_OPTS=m
> CONFIG_IP6_NF_MATCH_FRAG=m
> CONFIG_IP6_NF_MATCH_HL=m
> CONFIG_IP6_NF_MATCH_MULTIPORT=m
> CONFIG_IP6_NF_MATCH_OWNER=m
> CONFIG_IP6_NF_MATCH_MARK=m
> CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> CONFIG_IP6_NF_MATCH_AHESP=m
> CONFIG_IP6_NF_MATCH_LENGTH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_MARK=m
>  
> #
> # Bridge: Netfilter Configuration
> #
> # CONFIG_BRIDGE_NF_EBTABLES is not set
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=m
>  
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IPV6_SCTP__=m
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_ADLER32 is not set
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> CONFIG_SCTP_HMAC_NONE=y
> # CONFIG_SCTP_HMAC_SHA1 is not set
> # CONFIG_SCTP_HMAC_MD5 is not set
> # CONFIG_ATM is not set
> CONFIG_VLAN_8021Q=m
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>  
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_CSZ=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_INGRESS=m
> CONFIG_NET_QOS=y
> CONFIG_NET_ESTIMATOR=y
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_CLS_POLICE=y
>  
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=m
> CONFIG_NETDEVICES=y
>  
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> # CONFIG_BONDING is not set
> CONFIG_EQUALIZER=m
> CONFIG_TUN=m
> CONFIG_ETHERTAP=m
> # CONFIG_NET_SB1000 is not set
>  
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=m
> # CONFIG_TYPHOON is not set
>  
> #
> # Tulip family network device support
> #
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=m
> CONFIG_TULIP=m
> # CONFIG_TULIP_MWI is not set
> # CONFIG_TULIP_MMIO is not set
> CONFIG_DE4X5=m
> # CONFIG_WINBOND_840 is not set
> # CONFIG_DM9102 is not set
> CONFIG_PCMCIA_XIRCOM=m
> CONFIG_PCMCIA_XIRTULIP=m
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=m
> # CONFIG_AMD8111_ETH is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_B44 is not set
> # CONFIG_DGRS is not set
> CONFIG_EEPRO100=m
> # CONFIG_EEPRO100_PIO is not set
> CONFIG_E100=m
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> CONFIG_NE2K_PCI=m
> CONFIG_8139CP=m
> CONFIG_8139TOO=m
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_OLD_RX_RESET is not set
> # CONFIG_SIS900 is not set
> CONFIG_EPIC100=m
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
>  
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_E1000 is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_R8169 is not set
> # CONFIG_SIS190 is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
>  
> #
> # Ethernet (10000 Mbit)
> #
> # CONFIG_IXGB is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPPOE=m
> # CONFIG_SLIP is not set
>  
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
>  
> #
> # Obsolete Wireless cards support (pre-802.11)
> #
> # CONFIG_STRIP is not set
> # CONFIG_PCMCIA_WAVELAN is not set
> # CONFIG_PCMCIA_NETWAVE is not set
>  
> #
> # Wireless 802.11 Frequency Hopping cards support
> #
> # CONFIG_PCMCIA_RAYCS is not set
>  
> #
> # Wireless 802.11b ISA/PCI cards support
> #
> # CONFIG_AIRO is not set
> CONFIG_HERMES=m
> CONFIG_PLX_HERMES=m
> CONFIG_TMD_HERMES=m
> CONFIG_PCI_HERMES=m
>  
> #
> # Wireless 802.11b Pcmcia/Cardbus cards support
> #
> CONFIG_PCMCIA_HERMES=m
> CONFIG_AIRO_CS=m
> # CONFIG_PCMCIA_ATMEL is not set
> # CONFIG_PCMCIA_WL3501 is not set
> CONFIG_NET_WIRELESS=y
>  
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> CONFIG_SHAPER=m
>  
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>  
> #
> # PCMCIA network device support
> #
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=m
> CONFIG_PCMCIA_3C574=m
> # CONFIG_PCMCIA_FMVJ18X is not set
> CONFIG_PCMCIA_PCNET=m
> # CONFIG_PCMCIA_NMCLAN is not set
> # CONFIG_PCMCIA_SMC91C92 is not set
> CONFIG_PCMCIA_XIRC2PS=m
> # CONFIG_PCMCIA_AXNET is not set
>  
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>  
> #
> # IrDA (infrared) support
> #
> CONFIG_IRDA=m
>  
> #
> # IrDA protocols
> #
> CONFIG_IRLAN=m
> CONFIG_IRNET=m
> CONFIG_IRCOMM=m
> CONFIG_IRDA_ULTRA=y
>  
> #
> # IrDA options
> #
> CONFIG_IRDA_CACHE_LAST_LSAP=y
> CONFIG_IRDA_FAST_RR=y
> # CONFIG_IRDA_DEBUG is not set
>  
> #
> # Infrared-port device drivers
> #
>  
> #
> # SIR device drivers
> #
> CONFIG_IRTTY_SIR=m
>  
> #
> # Dongle support
> #
> # CONFIG_DONGLE is not set
>  
> #
> # Old SIR device drivers
> #
> CONFIG_IRPORT_SIR=m
>  
> #
> # Old Serial dongle support
> #
> # CONFIG_DONGLE_OLD is not set
>  
> #
> # FIR device drivers
> #
> # CONFIG_USB_IRDA is not set
> # CONFIG_TOSHIBA_FIR is not set
> # CONFIG_VLSI_FIR is not set
>  
> #
> # Bluetooth support
> #
> # CONFIG_BT is not set
>  
> #
> # ISDN subsystem
> #
> CONFIG_ISDN_BOOL=y
>  
> #
> # Old ISDN4Linux
> #
> CONFIG_ISDN=m
> # CONFIG_ISDN_NET_SIMPLE is not set
> # CONFIG_ISDN_NET_CISCO is not set
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> CONFIG_ISDN_PPP_BSDCOMP=m
> CONFIG_ISDN_AUDIO=y
> CONFIG_ISDN_TTY_FAX=y
>  
> #
> # ISDN feature submodules
> #
> # CONFIG_ISDN_DRV_LOOP is not set
>  
> #
> # CAPI subsystem
> #
> CONFIG_ISDN_CAPI=m
> CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
> CONFIG_ISDN_CAPI_MIDDLEWARE=y
> CONFIG_ISDN_CAPI_CAPI20=m
> CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
> CONFIG_ISDN_CAPI_CAPIFS=m
> CONFIG_ISDN_CAPI_CAPIDRV=m
>  
> #
> # CAPI hardware drivers
> #
>  
> #
> # Active AVM cards
> #
> # CONFIG_CAPI_AVM is not set
>  
> #
> # Active Eicon DIVA Server cards
> #
> # CONFIG_CAPI_EICON is not set
>  
> #
> # ISDN4Linux hardware drivers
> #
>  
> #
> # Passive cards
> #
> CONFIG_ISDN_DRV_HISAX=m
>  
> #
> # D-channel protocol features
> #
> CONFIG_HISAX_EURO=y
> CONFIG_DE_AOC=y
> CONFIG_HISAX_NO_SENDCOMPLETE=y
> # CONFIG_HISAX_NO_LLC is not set
> # CONFIG_HISAX_NO_KEYPAD is not set
> # CONFIG_HISAX_1TR6 is not set
> # CONFIG_HISAX_NI1 is not set
> CONFIG_HISAX_MAX_CARDS=8
>  
> #
> # HiSax supported cards
> #
> # CONFIG_HISAX_16_3 is not set
> # CONFIG_HISAX_TELESPCI is not set
> # CONFIG_HISAX_S0BOX is not set
> CONFIG_HISAX_FRITZPCI=y
> CONFIG_HISAX_AVM_A1_PCMCIA=y
> # CONFIG_HISAX_ELSA is not set
> # CONFIG_HISAX_DIEHLDIVA is not set
> # CONFIG_HISAX_SEDLBAUER is not set
> # CONFIG_HISAX_NETJET is not set
> # CONFIG_HISAX_NETJET_U is not set
> # CONFIG_HISAX_NICCY is not set
> # CONFIG_HISAX_BKM_A4T is not set
> # CONFIG_HISAX_SCT_QUADRO is not set
> # CONFIG_HISAX_GAZEL is not set
> # CONFIG_HISAX_HFC_PCI is not set
> # CONFIG_HISAX_W6692 is not set
> CONFIG_HISAX_HFC_SX=y
> # CONFIG_HISAX_ENTERNOW_PCI is not set
> # CONFIG_HISAX_DEBUG is not set
> CONFIG_HISAX_ELSA_CS=m
> CONFIG_HISAX_AVM_A1_CS=m
> # CONFIG_HISAX_ST5481 is not set
> CONFIG_HISAX_FRITZ_PCIPNP=m
> # CONFIG_HISAX_HFCPCI is not set
>  
> #
> # Active cards
> #
> # CONFIG_ISDN_DRV_EICON is not set
> # CONFIG_ISDN_DRV_TPAM is not set
> # CONFIG_HYSDN is not set
>  
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>  
> #
> # Input device support
> #
> CONFIG_INPUT=y
>  
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> CONFIG_INPUT_MOUSEDEV_PSAUX=y
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=m
> CONFIG_INPUT_EVBUG=m
>  
> #
> # Input I/O drivers
> #
> CONFIG_GAMEPORT=m
> CONFIG_SOUND_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> # CONFIG_GAMEPORT_L4 is not set
> # CONFIG_GAMEPORT_EMU10K1 is not set
> # CONFIG_GAMEPORT_VORTEX is not set
> # CONFIG_GAMEPORT_FM801 is not set
> # CONFIG_GAMEPORT_CS461x is not set
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> CONFIG_SERIO_PCIPS2=y
>  
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> # CONFIG_MOUSE_PS2_SYNAPTICS is not set
> # CONFIG_MOUSE_SERIAL is not set
> CONFIG_INPUT_JOYSTICK=y
> CONFIG_JOYSTICK_ANALOG=m
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> CONFIG_JOYSTICK_GUILLEMOT=m
> # CONFIG_JOYSTICK_INTERACT is not set
> CONFIG_JOYSTICK_SIDEWINDER=m
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> # CONFIG_JOYSTICK_TWIDDLER is not set
> # CONFIG_JOYSTICK_DB9 is not set
> # CONFIG_JOYSTICK_GAMECON is not set
> # CONFIG_JOYSTICK_TURBOGRAFX is not set
> # CONFIG_INPUT_JOYDUMP is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> CONFIG_INPUT_UINPUT=m
>  
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>  
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> # CONFIG_SERIAL_8250_CS is not set
> CONFIG_SERIAL_8250_NR_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> # CONFIG_SERIAL_8250_MANY_PORTS is not set
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> # CONFIG_SERIAL_8250_DETECT_IRQ is not set
> # CONFIG_SERIAL_8250_MULTIPORT is not set
> # CONFIG_SERIAL_8250_RSA is not set
>  
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
> CONFIG_PRINTER=y
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> # CONFIG_TIPAR is not set
>  
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_CHARDEV=m
>  
> #
> # I2C Algorithms
> #
> # CONFIG_I2C_ALGOBIT is not set
> # CONFIG_I2C_ALGOPCF is not set
>  
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI15X3 is not set
> # CONFIG_I2C_AMD756 is not set
> # CONFIG_I2C_AMD8111 is not set
> CONFIG_I2C_I801=m
> # CONFIG_I2C_NFORCE2 is not set
> CONFIG_I2C_PIIX4=m
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> # CONFIG_I2C_SIS96X is not set
> CONFIG_I2C_VIAPRO=m
>  
> #
> # I2C Hardware Sensors Chip support
> #
> CONFIG_I2C_SENSOR=m
> # CONFIG_SENSORS_ADM1021 is not set
> # CONFIG_SENSORS_EEPROM is not set
> CONFIG_SENSORS_IT87=m
> CONFIG_SENSORS_LM75=m
> CONFIG_SENSORS_LM78=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_VIA686A=m
> # CONFIG_SENSORS_W83781D is not set
>  
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_QIC02_TAPE is not set
> 
>                                                                                                     
> #
> # IPMI
> #
> # CONFIG_IPMI_HANDLER is not set
>  
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> CONFIG_HW_RANDOM=y
> CONFIG_NVRAM=y
> CONFIG_RTC=y
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
>  
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=y
> # CONFIG_AGP_ALI is not set
> # CONFIG_AGP_ATI is not set
> # CONFIG_AGP_AMD is not set
> # CONFIG_AGP_AMD64 is not set
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_NVIDIA=y
> # CONFIG_AGP_SIS is not set
> # CONFIG_AGP_SWORKS is not set
> CONFIG_AGP_VIA=y
> CONFIG_DRM=y
> CONFIG_DRM_TDFX=y
> # CONFIG_DRM_GAMMA is not set
> CONFIG_DRM_R128=y
> CONFIG_DRM_RADEON=y
> # CONFIG_DRM_I810 is not set
> # CONFIG_DRM_I830 is not set
> # CONFIG_DRM_MGA is not set
> # CONFIG_DRM_SIS is not set
>  
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> CONFIG_MWAVE=m
> CONFIG_RAW_DRIVER=m
> CONFIG_MAX_RAW_DEVS=256
> CONFIG_HANGCHECK_TIMER=m
>  
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=y
>  
> #
> # Video For Linux
> #
>  
> #
> # Video Adapters
> #
> CONFIG_VIDEO_BWQCAM=m
> CONFIG_VIDEO_CQCAM=m
> # CONFIG_VIDEO_CPIA is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_SAA7134 is not set
> # CONFIG_VIDEO_MXB is not set
> # CONFIG_VIDEO_DPC is not set
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
>  
> #
> # Radio Adapters
> #
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
>  
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> # CONFIG_VIDEO_BTCX is not set
>  
> #
> # Graphics support
> #
> CONFIG_FB=y
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_IMSTT is not set
> # CONFIG_FB_VGA16 is not set
> CONFIG_FB_VESA=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_RIVA is not set
> # CONFIG_FB_I810 is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_VIRTUAL is not set
>  
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> # CONFIG_MDA_CONSOLE is not set
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_PCI_CONSOLE=y
> CONFIG_FONTS=y
> # CONFIG_FONT_8x8 is not set
> CONFIG_FONT_8x16=y
> # CONFIG_FONT_6x11 is not set
> # CONFIG_FONT_PEARL_8x8 is not set
> # CONFIG_FONT_ACORN_8x8 is not set
> # CONFIG_FONT_MINI_4x6 is not set
> # CONFIG_FONT_SUN8x16 is not set
> # CONFIG_FONT_SUN12x22 is not set
>  
> #
> # Logo configuration
> #
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
>  
> #
> # Sound
> #
> CONFIG_SOUND=m
>  
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=m
> CONFIG_SND_VERBOSE_PRINTK=y
> # CONFIG_SND_DEBUG is not set
>  
> #
> # Generic devices
> #
> CONFIG_SND_DUMMY=m
> CONFIG_SND_VIRMIDI=m
> # CONFIG_SND_MTPAV is not set
> CONFIG_SND_SERIAL_U16550=m
> CONFIG_SND_MPU401=m
>  
> #
> # PCI devices
> #
> # CONFIG_SND_ALI5451 is not set
> # CONFIG_SND_AZT3328 is not set
> # CONFIG_SND_CS46XX is not set
> # CONFIG_SND_CS4281 is not set
> # CONFIG_SND_EMU10K1 is not set
> # CONFIG_SND_KORG1212 is not set
> # CONFIG_SND_NM256 is not set
> # CONFIG_SND_RME32 is not set
> # CONFIG_SND_RME96 is not set
> # CONFIG_SND_RME9652 is not set
> # CONFIG_SND_HDSP is not set
> # CONFIG_SND_TRIDENT is not set
> CONFIG_SND_YMFPCI=m
> # CONFIG_SND_ALS4000 is not set
> # CONFIG_SND_CMIPCI is not set
> # CONFIG_SND_ENS1370 is not set
> # CONFIG_SND_ENS1371 is not set
> # CONFIG_SND_ES1938 is not set
> # CONFIG_SND_ES1968 is not set
> # CONFIG_SND_MAESTRO3 is not set
> # CONFIG_SND_FM801 is not set
> # CONFIG_SND_ICE1712 is not set
> # CONFIG_SND_ICE1724 is not set
> CONFIG_SND_INTEL8X0=m
> # CONFIG_SND_SONICVIBES is not set
> CONFIG_SND_VIA82XX=m
> # CONFIG_SND_VX222 is not set
>  
> #
> # ALSA USB devices
> #
> # CONFIG_SND_USB_AUDIO is not set
>  
> #
> # PCMCIA devices
> #
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_VXP440 is not set
>  
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
>  
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
>  
> #
> # Miscellaneous USB options
> #
> # CONFIG_USB_DEVICEFS is not set
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
>  
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_OHCI_HCD=m
> CONFIG_USB_UHCI_HCD=m
>  
> #
> # USB Device Class drivers
> #
> CONFIG_USB_AUDIO=m
> CONFIG_USB_BLUETOOTH_TTY=m
> CONFIG_USB_MIDI=m
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
> CONFIG_USB_STORAGE=m
> CONFIG_USB_STORAGE_DEBUG=y
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_HP8200e=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
>  
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> CONFIG_USB_HIDINPUT=y
> CONFIG_HID_FF=y
> CONFIG_HID_PID=y
> # CONFIG_LOGITECH_FF is not set
> # CONFIG_THRUSTMASTER_FF is not set
> # CONFIG_USB_HIDDEV is not set
>  
> #
> # USB HID Boot Protocol drivers
> #
> CONFIG_USB_KBD=m
> CONFIG_USB_MOUSE=m
> # CONFIG_USB_AIPTEK is not set
> # CONFIG_USB_WACOM is not set
> # CONFIG_USB_KBTAB is not set
> # CONFIG_USB_POWERMATE is not set
> # CONFIG_USB_XPAD is not set
>  
> #
> # USB Imaging devices
> #
> CONFIG_USB_MDC800=m
> CONFIG_USB_SCANNER=m
> CONFIG_USB_MICROTEK=m
> CONFIG_USB_HPUSBSCSI=m
>  
> #
> # USB Multimedia devices
> #
> # CONFIG_USB_DABUSB is not set
> # CONFIG_USB_VICAM is not set
> # CONFIG_USB_DSBR is not set
> CONFIG_USB_IBMCAM=m
> # CONFIG_USB_KONICAWC is not set
> CONFIG_USB_OV511=m
> CONFIG_USB_PWC=m
> CONFIG_USB_SE401=m
> CONFIG_USB_STV680=m
>  
> #
> # USB Network adaptors
> #
> # CONFIG_USB_CATC is not set
> # CONFIG_USB_KAWETH is not set
> # CONFIG_USB_PEGASUS is not set
> # CONFIG_USB_RTL8150 is not set
> # CONFIG_USB_USBNET is not set
>  
> #
> # USB port drivers
> #
> # CONFIG_USB_USS720 is not set
>  
> #
> # USB Serial Converter support
> #
> # CONFIG_USB_SERIAL is not set
>  
> #
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_EMI26 is not set
> # CONFIG_USB_TIGL is not set
> # CONFIG_USB_AUERSWALD is not set
> # CONFIG_USB_RIO500 is not set
> # CONFIG_USB_BRLVGER is not set
> # CONFIG_USB_LCD is not set
> CONFIG_USB_GADGET=y
> # CONFIG_USB_NET2280 is not set
> # CONFIG_USB_ZERO is not set
> # CONFIG_USB_ETH is not set
> # CONFIG_USB_GADGETFS is not set
>  
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> # CONFIG_EXT2_FS_SECURITY is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
>  
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> # CONFIG_UDF_FS is not set
>  
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_NTFS_FS=y
> # CONFIG_NTFS_DEBUG is not set
> # CONFIG_NTFS_RW is not set
>  
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_DEVFS_FS=y
> # CONFIG_DEVFS_MOUNT is not set
> # CONFIG_DEVFS_DEBUG is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLBFS is not set
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>  
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> # CONFIG_JFFS2_FS is not set
> # CONFIG_CRAMFS is not set
> # CONFIG_VXFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> CONFIG_UFS_FS=y
> # CONFIG_UFS_FS_WRITE is not set
>  
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V4=y
> # CONFIG_NFS_DIRECTIO is not set
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_SUNRPC=m
> # CONFIG_SUNRPC_GSS is not set
> CONFIG_SMB_FS=m
> CONFIG_SMB_NLS_DEFAULT=y
> CONFIG_SMB_NLS_REMOTE="cp850"
> CONFIG_CIFS=m
> CONFIG_NCP_FS=m
> CONFIG_NCPFS_PACKET_SIGNING=y
> CONFIG_NCPFS_IOCTL_LOCKING=y
> CONFIG_NCPFS_STRONG=y
> CONFIG_NCPFS_NFS_NS=y
> CONFIG_NCPFS_OS2_NS=y
> CONFIG_NCPFS_SMALLDOS=y
> CONFIG_NCPFS_NLS=y
> CONFIG_NCPFS_EXTRAS=y
> CONFIG_CODA_FS=m
> # CONFIG_CODA_FS_OLD_API is not set
> CONFIG_INTERMEZZO_FS=m
> # CONFIG_AFS_FS is not set
>  
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
>  
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> CONFIG_NLS_ISO8859_15=y
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> CONFIG_NLS_UTF8=y
>  
> #
> # Profiling support
> #
> # CONFIG_PROFILING is not set
>  
> #
> # Kernel hacking
> #
> CONFIG_DEBUG_KERNEL=y
> CONFIG_DEBUG_STACKOVERFLOW=y
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_IOVIRT is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> # CONFIG_DEBUG_INFO is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_FRAME_POINTER is not set
> CONFIG_X86_EXTRA_IRQS=y
> CONFIG_X86_FIND_SMP_CONFIG=y
> CONFIG_X86_MPPARSE=y
>  
> #
> # Security options
> #
> CONFIG_SECURITY=y
> # CONFIG_SECURITY_NETWORK is not set
> CONFIG_SECURITY_CAPABILITIES=y
> # CONFIG_SECURITY_ROOTPLUG is not set
> # CONFIG_SECURITY_SELINUX is not set
>  
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_HMAC=y
> # CONFIG_CRYPTO_NULL is not set
> # CONFIG_CRYPTO_MD4 is not set
> CONFIG_CRYPTO_MD5=y
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> CONFIG_CRYPTO_DES=y
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_SERPENT=m
> CONFIG_CRYPTO_AES=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_DEFLATE=y
> # CONFIG_CRYPTO_TEST is not set
>  
> #
> # Library routines
> #
> CONFIG_CRC32=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=y
> CONFIG_X86_BIOS_REBOOT=y
> CONFIG_PC=y
> ######### end .config ######
> 
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/