Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263775AbTKXPxz (ORCPT ); Mon, 24 Nov 2003 10:53:55 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263769AbTKXPxz (ORCPT ); Mon, 24 Nov 2003 10:53:55 -0500 Received: from e34.co.us.ibm.com ([32.97.110.132]:52433 "EHLO e34.co.us.ibm.com") by vger.kernel.org with ESMTP id S263800AbTKXPv7 (ORCPT ); Mon, 24 Nov 2003 10:51:59 -0500 Date: Mon, 24 Nov 2003 07:56:11 -0800 From: Mike Anderson To: Jean-Yves Simon Cc: linux-kernel@vger.kernel.org Subject: Re: Error message when aic7xxx is probing devices "Badness in kobject_get" on 2.6.0-test10 Message-ID: <20031124155611.GB7715@beaverton.ibm.com> Mail-Followup-To: Jean-Yves Simon , linux-kernel@vger.kernel.org References: <1069686284.2444.14.camel@little.lethalwp> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1069686284.2444.14.camel@little.lethalwp> X-Operating-System: Linux 2.0.32 on an i486 User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18833 Lines: 464 I sent a response last night to the list for another mail on this same badness output. You can find the mail here. http://marc.theaimsgroup.com/?l=linux-kernel&m=106966122108719&w=2 The mail points to a patch sent to the linux-scsi list. You can find the archive of this patch here. http://marc.theaimsgroup.com/?l=linux-scsi&m=106940008217622&w=2 Let me know if this does not stop the badness message. Jean-Yves Simon [lethalwp@tiscali.be] wrote: > Hello, > > [1.] One line summary of the problem: > on boot, an error appear while the aic7xxx module loads on a > 2.6.0-test10. > > > [2.] Full description of the problem/report: > device used: > 00:11.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) > > dmesg output: > --- > RAMDISK: Compressed image found at block 0 > VFS: Mounted root (ext2 filesystem). > SCSI subsystem initialized > PCI: Found IRQ 5 for device 0000:00:11.0 > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.35 > > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs > > (scsi0:A:0): 20.000MB/s transfers (20.000MHz, offset 15) > (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15) > (scsi0:A:4): 20.000MB/s transfers (20.000MHz, offset 16) > (scsi0:A:6): 160.000MB/s transfers (80.000MHz DT, offset 63, 16bit) > Badness in kobject_get at lib/kobject.c:439 > Call Trace: > [] kobject_get+0x4f/0x60 > [] get_device+0x18/0x20 > [] scsi_device_get+0x2c/0xa0 [scsi_mod] > [] __scsi_iterate_devices+0x4b/0x90 [scsi_mod] > [] scsi_run_host_queues+0x17/0x50 [scsi_mod] > [] ahc_linux_release_simq+0x94/0xe0 [aic7xxx] > [] ahc_linux_dv_thread+0x1fd/0x2c0 [aic7xxx] > [] ahc_linux_dv_thread+0x0/0x2c0 [aic7xxx] > [] kernel_thread_helper+0x5/0x10 > > Vendor: WDIGTL Model: ENTERPRISE Rev: 1.61 > Type: Direct-Access ANSI SCSI revision: 02 > scsi0:A:0:0: Tagged Queuing enabled. Depth 253 > SCSI device sda: 8515173 512-byte hdwr sectors (4360 MB) > SCSI device sda: drive cache: write back > sda: sda1 sda2 < sda5 > sda3 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00 > Type: CD-ROM ANSI SCSI revision: 02 > Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 > Type: CD-ROM ANSI SCSI revision: 02 > Vendor: IBM Model: DDYS-T36950N Rev: S96H > Type: Direct-Access ANSI SCSI revision: 03 > scsi0:A:6:0: Tagged Queuing enabled. Depth 253 > SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB) > SCSI device sdb: drive cache: write back > sdb: sdb1 sdb2 sdb3 < sdb5 > > Attached scsi disk sdb at scsi0, channel 0, id 6, lun 0 > kjournald starting. Commit interval 5 seconds > --- > > [3.] Keywords (i.e., modules, networking, kernel): > kernel > > [4.] Kernel version (from /proc/version): > Linux version 2.6.0-test10 (root@little.lethalwp) (gcc version 3.3.2 > 20031022 (Red Hat Linux 3.3.2-1)) #1 Mon Nov 24 13:00:22 CET 2003 > > > [5.] Output of Oops.. message (if applicable) with symbolic information > resolved (see Documentation/oops-tracing.txt) > It's not an Oops, but an error, see [2.] > > [6.] A small shell script or example program which triggers the > problem (if possible) > Just boot with the aic7xxx.ko module in the initrd, i suppose it will do > this too if you load it manually with modprobe > > > [7.] Environment > [7.1.] Software (add the output of the ver_linux script here) > If some fields are empty or look unusual you may have an old version. > Compare to the current minimal requirements in Documentation/Changes. > > Linux little.lethalwp 2.6.0-test10 #1 Mon Nov 24 13:00:22 CET 2003 i686 > i686 i386 GNU/Linux > > Gnu C 3.3.2 > Gnu make 3.79.1 > util-linux 2.11y > mount 2.11y > module-init-tools 2.4.25 > e2fsprogs 1.34 > reiserfsprogs 3.6.8 > quota-tools 3.06. > PPP 2.4.1 > nfs-utils 1.0.6 > Linux C Library 2.3.2 > Dynamic linker (ldd) 2.3.2 > Procps 2.0.17 > Net-tools 1.60 > Kbd 1.08 > Sh-utils 5.0 > Modules Loaded snd_pcm_oss agpgart nvidia vmnet vmmon nfs ide_cd > cdrom snd_mixer_oss uhci_hcd eeprom i2c_sensor usb_storage i2c_viapro > i2c_core binfmt_misc parport_pc lp parport nfsd exportfs lockd sunrpc > capability commoncap iptable_filter ip_tables 8139too mii crc32 ipv6 > microcode reiserfs nls_iso8859_1 nls_cp437 vfat fat snd_seq_midi > snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul > snd_seq_oss snd_seq_midi_event snd_seq snd_emu10k1 snd_rawmidi snd_pcm > snd_timer snd_seq_device snd_ac97_codec snd_page_alloc snd_util_mem > snd_hwdep snd soundcore hid usbcore aic7xxx sd_mod scsi_mod > > > [7.2.] Processor information (from /proc/cpuinfo): > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 8 > model name : Pentium III (Coppermine) > stepping : 10 > cpu MHz : 999.661 > cache size : 256 KB > fdiv_bug : no > hlt_bug : no > f00f_bug : no > coma_bug : no > fpu : yes > fpu_exception : yes > cpuid level : 2 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge > mca cmov pat pse36 mmx fxsr sse > bogomips : 1970.17 > > > [7.3.] Module information (from /proc/modules): > snd_pcm_oss 53700 0 - Live 0xe0d30000 > agpgart 32328 0 - Live 0xe0cd1000 > nvidia 1706124 10 - Live 0xe0e98000 > vmnet 28016 4 - Live 0xe0c79000 > vmmon 70105 0 - Live 0xe0c88000 > nfs 159328 1 - Live 0xe0c9e000 > ide_cd 40836 0 - Live 0xe0c48000 > cdrom 35360 1 ide_cd, Live 0xe0c54000 > snd_mixer_oss 19264 1 snd_pcm_oss, Live 0xe0b6e000 > uhci_hcd 32624 0 - Live 0xe0c09000 > eeprom 7048 0 - Live 0xe0a8f000 > i2c_sensor 2880 1 eeprom, Live 0xe0a92000 > usb_storage 66816 0 - Live 0xe0c5e000 > i2c_viapro 5964 0 - Live 0xe0a85000 > i2c_core 25352 3 eeprom,i2c_sensor,i2c_viapro, Live 0xe0c01000 > binfmt_misc 10504 1 - Live 0xe0b63000 > parport_pc 28940 1 - Live 0xe0bf8000 > lp 10688 0 - Live 0xe0a6b000 > parport 44264 2 parport_pc,lp, Live 0xe0bec000 > nfsd 184832 8 - Live 0xe0c19000 > exportfs 6464 1 nfsd, Live 0xe0a7b000 > lockd 64560 3 nfs,nfsd, Live 0xe0b77000 > sunrpc 134184 6 nfs,nfsd,lockd, Live 0xe0b8a000 > capability 3748 0 - Live 0xe0860000 > commoncap 6464 1 capability, Live 0xe0a78000 > iptable_filter 2688 0 - Live 0xe0811000 > ip_tables 17888 1 iptable_filter, Live 0xe0a7f000 > 8139too 20928 0 - Live 0xe0a88000 > mii 5120 1 8139too, Live 0xe0a75000 > crc32 4320 1 8139too, Live 0xe0a72000 > ipv6 255136 16 - Live 0xe0bac000 > microcode 6688 0 - Live 0xe0a6f000 > reiserfs 240116 1 - Live 0xe0a96000 > nls_iso8859_1 3904 4 - Live 0xe080d000 > nls_cp437 5568 4 - Live 0xe0a05000 > vfat 15744 4 - Live 0xe0a3a000 > fat 45568 1 vfat, Live 0xe0a48000 > snd_seq_midi 8416 0 - Live 0xe0a01000 > snd_emu10k1_synth 7776 0 - Live 0xe09fe000 > snd_emux_synth 37856 1 snd_emu10k1_synth, Live 0xe0a25000 > snd_seq_virmidi 7488 1 snd_emux_synth, Live 0xe09fb000 > snd_seq_midi_emul 7968 1 snd_emux_synth, Live 0xe0958000 > snd_seq_oss 34816 0 - Live 0xe0a1b000 > snd_seq_midi_event 7680 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss, Live > 0xe0930000 > snd_seq 55792 8 > snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event, Live 0xe0a0c000 > snd_emu10k1 70340 1 snd_emu10k1_synth, Live 0xe0945000 > snd_rawmidi 24864 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live > 0xe093d000 > snd_pcm 100612 2 snd_pcm_oss,snd_emu10k1, Live 0xe095b000 > snd_timer 25572 2 snd_seq,snd_pcm, Live 0xe0935000 > snd_seq_device 8040 7 > snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi, Live 0xe088e000 > snd_ac97_codec 54884 1 snd_emu10k1, Live 0xe0851000 > snd_page_alloc 11812 2 snd_emu10k1,snd_pcm, Live 0xe0818000 > snd_util_mem 4448 2 snd_emux_synth,snd_emu10k1, Live 0xe0820000 > snd_hwdep 9440 1 snd_emu10k1, Live 0xe082d000 > snd 51876 16 > snd_pcm_oss,snd_mixer_oss,snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_emu10k1,snd_rawmidi,snd_pcm,snd_timer,snd_seq_device,snd_ac97_codec,snd_util_mem,snd_hwdep, Live 0xe0862000 > soundcore 9088 1 snd, Live 0xe081c000 > hid 32960 0 - Live 0xe0823000 > usbcore 110428 5 uhci_hcd,usb_storage,hid, Live 0xe0872000 > aic7xxx 211116 6 - Live 0xe0891000 > sd_mod 15232 8 - Live 0xe0813000 > scsi_mod 118808 3 usb_storage,aic7xxx,sd_mod, Live 0xe0832000 > > > [7.4.] Loaded driver and hardware information (/proc/ioports, > /proc/iomem) > ioports: > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-005f : timer > 0060-006f : keyboard > 0070-0077 : rtc > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : ide1 > 01f0-01f7 : ide0 > 0376-0376 : ide1 > 0378-037a : parport0 > 037b-037f : parport0 > 03c0-03df : vga+ > 03f6-03f6 : ide0 > 0cf8-0cff : PCI conf1 > 5000-5007 : viapro-smbus > d000-d00f : 0000:00:07.1 > d000-d007 : ide0 > d008-d00f : ide1 > d400-d41f : 0000:00:07.2 > d400-d41f : uhci_hcd > d800-d8ff : 0000:00:11.0 > dc00-dcff : 0000:00:12.0 > dc00-dcff : 8139too > e000-e01f : 0000:00:13.0 > e000-e01f : EMU10K1 > e400-e407 : 0000:00:13.1 > > iomem: > 00000000-0009fbff : System RAM > 0009fc00-0009ffff : reserved > 000a0000-000bffff : Video RAM area > 000d4000-000d93ff : Extension ROM > 000f0000-000fffff : System ROM > 00100000-1fffffff : System RAM > 00100000-002ade57 : Kernel code > 002ade58-00337eff : Kernel data > d0000000-dfffffff : PCI Bus #01 > d0000000-d7ffffff : 0000:01:00.0 > d8000000-d807ffff : 0000:01:00.0 > e0000000-e7ffffff : 0000:00:00.0 > e8000000-e9ffffff : PCI Bus #01 > e8000000-e8ffffff : 0000:01:00.0 > eb000000-eb000fff : 0000:00:11.0 > eb000000-eb000fff : aic7xxx > eb001000-eb0010ff : 0000:00:12.0 > eb001000-eb0010ff : 8139too > ffff0000-ffffffff : reserved > > > > > [7.5.] PCI information ('lspci -vvv' as root) > 00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo > PRO133x] (rev 82) > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2 > > 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo > MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000f000-00000fff > Memory behind bridge: e8000000-e9ffffff > Prefetchable memory behind bridge: d0000000-dfffffff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] > (rev 12) > Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping+ SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > > 00:07.1 IDE interface: VIA Technologies, Inc. > VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) > (prog-if 8a [Master SecP PriP]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 > Region 4: I/O ports at d000 [size=16] > > 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 08) (prog-if 00 > [UHCI]) > Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32, cache line size 08 > Interrupt: pin D routed to IRQ 10 > Region 4: I/O ports at d400 [size=32] > > 00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management > (rev 20) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- > 00:11.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02) > Subsystem: Adaptec 29160 Ultra160 SCSI Controller > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (10000ns min, 6250ns max), cache line size 08 > Interrupt: pin A routed to IRQ 5 > BIST result: 00 > Region 0: I/O ports at d800 [disabled] [size=256] > Region 1: Memory at eb000000 (64-bit, non-prefetchable) > [size=4K] > Expansion ROM at [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:12.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX > (rev 10) > Subsystem: Accton Technology Corporation: Unknown device 9211 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (8000ns min, 16000ns max) > Interrupt: pin A routed to IRQ 9 > Region 0: I/O ports at dc00 [size=256] > Region 1: Memory at eb001000 (32-bit, non-prefetchable) > [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA > PME(D0-,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable+ DSel=0 DScale=0 PME- > > 00:13.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev > 07) > Subsystem: Creative Labs SB Live! 5.1 Model SB0100 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 (500ns min, 5000ns max) > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at e000 [size=32] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:13.1 Input device controller: Creative Labs SB Live! MIDI/Game Port > (rev 07) > Subsystem: Creative Labs Gameport Joystick > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 32 > Region 0: I/O ports at e400 [size=8] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti > 4200] (rev a3) (prog-if 00 [VGA]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 248 (1250ns min, 250ns max) > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e8000000 (32-bit, non-prefetchable) > [size=16M] > Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] > Region 2: Memory at d8000000 (32-bit, prefetchable) [size=512K] > Expansion ROM at [disabled] [size=128K] > Capabilities: [60] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [44] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4 > Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x2 > > > > [7.6.] SCSI information (from /proc/scsi/scsi) > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: WDIGTL Model: ENTERPRISE Rev: 1.61 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00 > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 04 Lun: 00 > Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.06 > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 06 Lun: 00 > Vendor: IBM Model: DDYS-T36950N Rev: S96H > Type: Direct-Access ANSI SCSI revision: 03 > > > > > > -- > Jean-Yves Simon > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -andmike -- Michael Anderson andmike@us.ibm.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/