Received: by 2002:ac0:a582:0:0:0:0:0 with SMTP id m2-v6csp3790928imm; Mon, 8 Oct 2018 09:32:54 -0700 (PDT) X-Google-Smtp-Source: ACcGV629LIg8SVK2bhX8kd2gw6r5zC14uCAVFUpvzYKYH81jcM3rJaMzrmtjJ8CVCRRyllN6Skur X-Received: by 2002:aa7:814f:: with SMTP id d15-v6mr26110307pfn.78.1539016374789; Mon, 08 Oct 2018 09:32:54 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1539016374; cv=none; d=google.com; s=arc-20160816; b=suzOmmDBloVcZ2YBOOd2bZTiwZ89VG58swwYjsC8+H1drYRMD19T2qnYU0kXbRDlnY N6GZxFbfWxvgIsQ3eiJZp2QMZUieMyH3LQJkI7pdRPT9ZXFIdpggWu+dl7tIxxVdks8A 5f5OWYVhI7tp6hUSn+AyTKpd7i9ovKPEPe97D3/6Lzk+/vVLbdwg5JJB7x7few9MUIfZ SEB5DbEQ3Iz/Bo+tdIDUHrgDX3x+YNMRDONDSIgFRWFlKImhza+/2eaCM65PH9/pSqlO tKyuAjOgKTh/0/7ZQuAfwToCQ46w9T5bGG9bSmENKtwuBUE5XzuoKdJh0kvwqx0DfkH0 Swfw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:mime-version:content-transfer-encoding :content-language:accept-language:in-reply-to:references:message-id :date:thread-index:thread-topic:subject:cc:to:from; bh=xFSvYxQS/GQErsvXOc30Pf10Zh3dJXQ929ICU4RvvMI=; b=cyiuC2zYjZN+VsvyBo0Mmd7Z2dnJhNhgaQrMRWUHRvhpaFuS6mNxsR3i/gkhj++sTc qwgCPtosSFex+L9oxmoFnZQSSfoeKUck3Y0b1sSsumOKBAPvJdBL3LPfgBMDPDktgrjd mL6kkLm5PDuwK5tqVpNN+XtdL7roCvgT8CekkzbHn9g3Mw17nlR0QzbXZPZ7w8iuhaQd FGkMWdNhlKYPp3yEjyD40dM/1y3txQZYzu1hjxe0RNVQhIkFeFD5+sozzr8dfiy8pY5v caFCUH87ycELI2bqVqwYmW7L54miwx/g8N+PJsHx1Ari0wNxwD81JfzbkSSQFX13320i CYFw== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id o8-v6si18053590pgk.43.2018.10.08.09.32.39; Mon, 08 Oct 2018 09:32:54 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726902AbeJHXmp convert rfc822-to-8bit (ORCPT + 99 others); Mon, 8 Oct 2018 19:42:45 -0400 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:22099 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726731AbeJHXmn (ORCPT ); Mon, 8 Oct 2018 19:42:43 -0400 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-.pphosted.com (8.16.0.21/8.16.0.21) with SMTP id w98GJavn002935; Mon, 8 Oct 2018 18:29:41 +0200 Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2mxjgxm25j-1 (version=TLSv1 cipher=ECDHE-RSA-AES256-SHA bits=256 verify=NOT); Mon, 08 Oct 2018 18:29:41 +0200 Received: from zeta.dmz-eu.st.com (zeta.dmz-eu.st.com [164.129.230.9]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id A84D03A; Mon, 8 Oct 2018 16:29:40 +0000 (GMT) Received: from Webmail-eu.st.com (sfhdag6node2.st.com [10.75.127.17]) by zeta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6BF9757D6; Mon, 8 Oct 2018 16:29:40 +0000 (GMT) Received: from SFHDAG6NODE2.st.com (10.75.127.17) by SFHDAG6NODE2.st.com (10.75.127.17) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Mon, 8 Oct 2018 18:29:39 +0200 Received: from SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6]) by SFHDAG6NODE2.st.com ([fe80::a56f:c186:bab7:13d6%20]) with mapi id 15.00.1347.000; Mon, 8 Oct 2018 18:29:39 +0200 From: Pascal PAILLET-LME To: "dmitry.torokhov@gmail.com" , "robh+dt@kernel.org" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" CC: Pascal PAILLET-LME Subject: [PATCH v3 2/8] mfd: stpmic1: add stpmic1 driver Thread-Topic: [PATCH v3 2/8] mfd: stpmic1: add stpmic1 driver Thread-Index: AQHUXyQc3msRlofngE695082k4Ztlw== Date: Mon, 8 Oct 2018 16:29:39 +0000 Message-ID: <1539016176-4072-3-git-send-email-p.paillet@st.com> References: <1539016176-4072-1-git-send-email-p.paillet@st.com> In-Reply-To: <1539016176-4072-1-git-send-email-p.paillet@st.com> Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-ms-exchange-messagesentrepresentingtype: 1 x-ms-exchange-transport-fromentityheader: Hosted x-originating-ip: [10.75.127.49] Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8BIT MIME-Version: 1.0 X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:,, definitions=2018-10-08_07:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: pascal paillet stpmic1 is a pmic from STMicroelectronics. The STPMIC1 integrates 10 regulators ,3 switches, a watchdog and an input for a power on key. Signed-off-by: pascal paillet --- changes in v3: * Rename struct stpmic1_dev by struct stpmic1. * Rework i2c client data. * Clean device data structure content. The device data is used by MFD childs to access regmap. * Remove wakeup interrupt. * Reorder functions in order to remove prototypes. * Suppress static functions called from probe. * Cosmetics. drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 1 + drivers/mfd/stpmic1.c | 401 ++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/stpmic1.h | 212 +++++++++++++++++++++++ 4 files changed, 627 insertions(+) create mode 100644 drivers/mfd/stpmic1.c create mode 100644 include/linux/mfd/stpmic1.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 11841f4..b8dabc7 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1855,6 +1855,19 @@ config MFD_STM32_TIMERS for PWM and IIO Timer. This driver allow to share the registers between the others drivers. +config MFD_STPMIC1 + tristate "Support for STPMIC1 PMIC" + depends on (I2C=y && OF) + select REGMAP_I2C + select REGMAP_IRQ + select MFD_CORE + help + Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 MFD driver is + the core driver for STPMIC1 component that mainly handles interrupts. + + To compile this driver as a module, choose M here: the + module will be called stpmic1. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 5856a94..76fff14 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -232,6 +232,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o obj-$(CONFIG_MFD_MT6397) += mt6397-core.o obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o +obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c new file mode 100644 index 0000000..90dfee4 --- /dev/null +++ b/drivers/mfd/stpmic1.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (C) STMicroelectronics 2018 +// Author: Pascal Paillet + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define STPMIC1_MAIN_IRQ 0 +#define STPMIC1_WAKEUP_IRQ 1 + +static bool stpmic1_reg_readable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TURN_ON_SR: + case TURN_OFF_SR: + case ICC_LDO_TURN_OFF_SR: + case ICC_BUCK_TURN_OFF_SR: + case RREQ_STATE_SR: + case VERSION_SR: + case SWOFF_PWRCTRL_CR: + case PADS_PULL_CR: + case BUCKS_PD_CR: + case LDO14_PD_CR: + case LDO56_VREF_PD_CR: + case VBUS_DET_VIN_CR: + case PKEY_TURNOFF_CR: + case BUCKS_MASK_RANK_CR: + case BUCKS_MASK_RESET_CR: + case LDOS_MASK_RANK_CR: + case LDOS_MASK_RESET_CR: + case WCHDG_CR: + case WCHDG_TIMER_CR: + case BUCKS_ICCTO_CR: + case LDOS_ICCTO_CR: + case BUCK1_ACTIVE_CR: + case BUCK2_ACTIVE_CR: + case BUCK3_ACTIVE_CR: + case BUCK4_ACTIVE_CR: + case VREF_DDR_ACTIVE_CR: + case LDO1_ACTIVE_CR: + case LDO2_ACTIVE_CR: + case LDO3_ACTIVE_CR: + case LDO4_ACTIVE_CR: + case LDO5_ACTIVE_CR: + case LDO6_ACTIVE_CR: + case BUCK1_STDBY_CR: + case BUCK2_STDBY_CR: + case BUCK3_STDBY_CR: + case BUCK4_STDBY_CR: + case VREF_DDR_STDBY_CR: + case LDO1_STDBY_CR: + case LDO2_STDBY_CR: + case LDO3_STDBY_CR: + case LDO4_STDBY_CR: + case LDO5_STDBY_CR: + case LDO6_STDBY_CR: + case BST_SW_CR: + case INT_PENDING_R1: + case INT_PENDING_R2: + case INT_PENDING_R3: + case INT_PENDING_R4: + case INT_DBG_LATCH_R1: + case INT_DBG_LATCH_R2: + case INT_DBG_LATCH_R3: + case INT_DBG_LATCH_R4: + case INT_CLEAR_R1: + case INT_CLEAR_R2: + case INT_CLEAR_R3: + case INT_CLEAR_R4: + case INT_MASK_R1: + case INT_MASK_R2: + case INT_MASK_R3: + case INT_MASK_R4: + case INT_SET_MASK_R1: + case INT_SET_MASK_R2: + case INT_SET_MASK_R3: + case INT_SET_MASK_R4: + case INT_CLEAR_MASK_R1: + case INT_CLEAR_MASK_R2: + case INT_CLEAR_MASK_R3: + case INT_CLEAR_MASK_R4: + case INT_SRC_R1: + case INT_SRC_R2: + case INT_SRC_R3: + case INT_SRC_R4: + return true; + default: + return false; + } +} + +static bool stpmic1_reg_writeable(struct device *dev, unsigned int reg) +{ + switch (reg) { + case SWOFF_PWRCTRL_CR: + case PADS_PULL_CR: + case BUCKS_PD_CR: + case LDO14_PD_CR: + case LDO56_VREF_PD_CR: + case VBUS_DET_VIN_CR: + case PKEY_TURNOFF_CR: + case BUCKS_MASK_RANK_CR: + case BUCKS_MASK_RESET_CR: + case LDOS_MASK_RANK_CR: + case LDOS_MASK_RESET_CR: + case WCHDG_CR: + case WCHDG_TIMER_CR: + case BUCKS_ICCTO_CR: + case LDOS_ICCTO_CR: + case BUCK1_ACTIVE_CR: + case BUCK2_ACTIVE_CR: + case BUCK3_ACTIVE_CR: + case BUCK4_ACTIVE_CR: + case VREF_DDR_ACTIVE_CR: + case LDO1_ACTIVE_CR: + case LDO2_ACTIVE_CR: + case LDO3_ACTIVE_CR: + case LDO4_ACTIVE_CR: + case LDO5_ACTIVE_CR: + case LDO6_ACTIVE_CR: + case BUCK1_STDBY_CR: + case BUCK2_STDBY_CR: + case BUCK3_STDBY_CR: + case BUCK4_STDBY_CR: + case VREF_DDR_STDBY_CR: + case LDO1_STDBY_CR: + case LDO2_STDBY_CR: + case LDO3_STDBY_CR: + case LDO4_STDBY_CR: + case LDO5_STDBY_CR: + case LDO6_STDBY_CR: + case BST_SW_CR: + case INT_DBG_LATCH_R1: + case INT_DBG_LATCH_R2: + case INT_DBG_LATCH_R3: + case INT_DBG_LATCH_R4: + case INT_CLEAR_R1: + case INT_CLEAR_R2: + case INT_CLEAR_R3: + case INT_CLEAR_R4: + case INT_SET_MASK_R1: + case INT_SET_MASK_R2: + case INT_SET_MASK_R3: + case INT_SET_MASK_R4: + case INT_CLEAR_MASK_R1: + case INT_CLEAR_MASK_R2: + case INT_CLEAR_MASK_R3: + case INT_CLEAR_MASK_R4: + return true; + default: + return false; + } +} + +static bool stpmic1_reg_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TURN_ON_SR: + case TURN_OFF_SR: + case ICC_LDO_TURN_OFF_SR: + case ICC_BUCK_TURN_OFF_SR: + case RREQ_STATE_SR: + case INT_PENDING_R1: + case INT_PENDING_R2: + case INT_PENDING_R3: + case INT_PENDING_R4: + case INT_SRC_R1: + case INT_SRC_R2: + case INT_SRC_R3: + case INT_SRC_R4: + case WCHDG_CR: + return true; + default: + return false; + } +} + +const struct regmap_config stpmic1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .cache_type = REGCACHE_RBTREE, + .max_register = PMIC_MAX_REGISTER_ADDRESS, + .readable_reg = stpmic1_reg_readable, + .writeable_reg = stpmic1_reg_writeable, + .volatile_reg = stpmic1_reg_volatile, +}; + +static const struct regmap_irq stpmic1_irqs[] = { + [IT_PONKEY_F] = { .mask = 0x01 }, + [IT_PONKEY_R] = { .mask = 0x02 }, + [IT_WAKEUP_F] = { .mask = 0x04 }, + [IT_WAKEUP_R] = { .mask = 0x08 }, + [IT_VBUS_OTG_F] = { .mask = 0x10 }, + [IT_VBUS_OTG_R] = { .mask = 0x20 }, + [IT_SWOUT_F] = { .mask = 0x40 }, + [IT_SWOUT_R] = { .mask = 0x80 }, + + [IT_CURLIM_BUCK1] = { .reg_offset = 1, .mask = 0x01 }, + [IT_CURLIM_BUCK2] = { .reg_offset = 1, .mask = 0x02 }, + [IT_CURLIM_BUCK3] = { .reg_offset = 1, .mask = 0x04 }, + [IT_CURLIM_BUCK4] = { .reg_offset = 1, .mask = 0x08 }, + [IT_OCP_OTG] = { .reg_offset = 1, .mask = 0x10 }, + [IT_OCP_SWOUT] = { .reg_offset = 1, .mask = 0x20 }, + [IT_OCP_BOOST] = { .reg_offset = 1, .mask = 0x40 }, + [IT_OVP_BOOST] = { .reg_offset = 1, .mask = 0x80 }, + + [IT_CURLIM_LDO1] = { .reg_offset = 2, .mask = 0x01 }, + [IT_CURLIM_LDO2] = { .reg_offset = 2, .mask = 0x02 }, + [IT_CURLIM_LDO3] = { .reg_offset = 2, .mask = 0x04 }, + [IT_CURLIM_LDO4] = { .reg_offset = 2, .mask = 0x08 }, + [IT_CURLIM_LDO5] = { .reg_offset = 2, .mask = 0x10 }, + [IT_CURLIM_LDO6] = { .reg_offset = 2, .mask = 0x20 }, + [IT_SHORT_SWOTG] = { .reg_offset = 2, .mask = 0x40 }, + [IT_SHORT_SWOUT] = { .reg_offset = 2, .mask = 0x80 }, + + [IT_TWARN_F] = { .reg_offset = 3, .mask = 0x01 }, + [IT_TWARN_R] = { .reg_offset = 3, .mask = 0x02 }, + [IT_VINLOW_F] = { .reg_offset = 3, .mask = 0x04 }, + [IT_VINLOW_R] = { .reg_offset = 3, .mask = 0x08 }, + [IT_SWIN_F] = { .reg_offset = 3, .mask = 0x40 }, + [IT_SWIN_R] = { .reg_offset = 3, .mask = 0x80 }, +}; + +static const struct regmap_irq_chip stpmic1_regmap_irq_chip = { + .name = "pmic_irq", + .status_base = INT_PENDING_R1, + .mask_base = INT_CLEAR_MASK_R1, + .unmask_base = INT_SET_MASK_R1, + .ack_base = INT_CLEAR_R1, + .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS, + .irqs = stpmic1_irqs, + .num_irqs = ARRAY_SIZE(stpmic1_irqs), +}; + +static int stpmic1_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct stpmic1 *ddata; + struct device *dev = &i2c->dev; + int ret; + struct device_node *np = dev->of_node; + u32 reg; + + ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + i2c_set_clientdata(i2c, ddata); + ddata->dev = dev; + + ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ); + if (ddata->irq < 0) { + dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq); + return ddata->irq; + } + + if (!of_property_read_u32(np, "st,main-control-register", ®)) { + ret = regmap_update_bits(ddata->regmap, + SWOFF_PWRCTRL_CR, + PWRCTRL_POLARITY_HIGH | + PWRCTRL_PIN_VALID | + RESTART_REQUEST_ENABLED, + reg); + if (ret) { + dev_err(dev, + "Failed to update main control register: %d\n", + ret); + return ret; + } + } + + /* Read Version ID */ + ret = regmap_read(ddata->regmap, VERSION_SR, ®); + if (ret) { + dev_err(dev, "Unable to read pmic version\n"); + return ret; + } + dev_info(dev, "PMIC Chip Version: 0x%x\n", reg); + + if (!of_property_read_u32(np, "st,pads-pull-register", ®)) { + ret = regmap_update_bits(ddata->regmap, + PADS_PULL_CR, + WAKEUP_DETECTOR_DISABLED | + PWRCTRL_PD_ACTIVE | + PWRCTRL_PU_ACTIVE | + WAKEUP_PD_ACTIVE, + reg); + if (ret) { + dev_err(dev, + "Failed to update pads control register: %d\n", + ret); + return ret; + } + } + + if (!of_property_read_u32(np, "st,vin-control-register", ®)) { + ret = regmap_update_bits(ddata->regmap, + VBUS_DET_VIN_CR, + VINLOW_CTRL_REG_MASK, + reg); + if (ret) { + dev_err(dev, + "Failed to update vin control register: %d\n", + ret); + return ret; + } + } + + if (!of_property_read_u32(np, "st,usb-control-register", ®)) { + ret = regmap_update_bits(ddata->regmap, BST_SW_CR, + BOOST_OVP_DISABLED | + VBUS_OTG_DETECTION_DISABLED | + SW_OUT_DISCHARGE | + VBUS_OTG_DISCHARGE | + OCP_LIMIT_HIGH, + reg); + if (ret) { + dev_err(dev, + "Failed to update usb control register: %d\n", + ret); + return ret; + } + } + + /* Initialize PMIC IRQ Chip & IRQ domains associated */ + ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq, + IRQF_ONESHOT | IRQF_SHARED, + 0, &stpmic1_regmap_irq_chip, + &ddata->irq_data); + if (ret) { + dev_err(dev, "IRQ Chip registration failed: %d\n", ret); + return ret; + } + + return devm_of_platform_populate(dev); +} + +static const struct i2c_device_id stpmic1_id[] = { + { "stpmic1"}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, stpmic1_id); + +#ifdef CONFIG_PM_SLEEP +static int stpmic1_suspend(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c); + + disable_irq(pmic_dev->irq); + + return 0; +} + +static int stpmic1_resume(struct device *dev) +{ + struct i2c_client *i2c = to_i2c_client(dev); + struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c); + int ret; + + ret = regcache_sync(pmic_dev->regmap); + if (ret) + return ret; + + enable_irq(pmic_dev->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume); + +static struct i2c_driver stpmic1_driver = { + .driver = { + .name = "stpmic1", + .pm = &stpmic1_pm, + }, + .probe = stpmic1_probe, + .id_table = stpmic1_id, +}; + +module_i2c_driver(stpmic1_driver); + +MODULE_DESCRIPTION("STPMIC1 PMIC Driver"); +MODULE_AUTHOR("Pascal Paillet "); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/stpmic1.h b/include/linux/mfd/stpmic1.h new file mode 100644 index 0000000..6bc1117 --- /dev/null +++ b/include/linux/mfd/stpmic1.h @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved + * Author: Philippe Peurichard , + * Pascal Paillet for STMicroelectronics. + */ + +#ifndef __LINUX_MFD_STPMIC1_H +#define __LINUX_MFD_STPMIC1_H + +#define TURN_ON_SR 0x1 +#define TURN_OFF_SR 0x2 +#define ICC_LDO_TURN_OFF_SR 0x3 +#define ICC_BUCK_TURN_OFF_SR 0x4 +#define RREQ_STATE_SR 0x5 +#define VERSION_SR 0x6 + +#define SWOFF_PWRCTRL_CR 0x10 +#define PADS_PULL_CR 0x11 +#define BUCKS_PD_CR 0x12 +#define LDO14_PD_CR 0x13 +#define LDO56_VREF_PD_CR 0x14 +#define VBUS_DET_VIN_CR 0x15 +#define PKEY_TURNOFF_CR 0x16 +#define BUCKS_MASK_RANK_CR 0x17 +#define BUCKS_MASK_RESET_CR 0x18 +#define LDOS_MASK_RANK_CR 0x19 +#define LDOS_MASK_RESET_CR 0x1A +#define WCHDG_CR 0x1B +#define WCHDG_TIMER_CR 0x1C +#define BUCKS_ICCTO_CR 0x1D +#define LDOS_ICCTO_CR 0x1E + +#define BUCK1_ACTIVE_CR 0x20 +#define BUCK2_ACTIVE_CR 0x21 +#define BUCK3_ACTIVE_CR 0x22 +#define BUCK4_ACTIVE_CR 0x23 +#define VREF_DDR_ACTIVE_CR 0x24 +#define LDO1_ACTIVE_CR 0x25 +#define LDO2_ACTIVE_CR 0x26 +#define LDO3_ACTIVE_CR 0x27 +#define LDO4_ACTIVE_CR 0x28 +#define LDO5_ACTIVE_CR 0x29 +#define LDO6_ACTIVE_CR 0x2A + +#define BUCK1_STDBY_CR 0x30 +#define BUCK2_STDBY_CR 0x31 +#define BUCK3_STDBY_CR 0x32 +#define BUCK4_STDBY_CR 0x33 +#define VREF_DDR_STDBY_CR 0x34 +#define LDO1_STDBY_CR 0x35 +#define LDO2_STDBY_CR 0x36 +#define LDO3_STDBY_CR 0x37 +#define LDO4_STDBY_CR 0x38 +#define LDO5_STDBY_CR 0x39 +#define LDO6_STDBY_CR 0x3A + +#define BST_SW_CR 0x40 + +#define INT_PENDING_R1 0x50 +#define INT_PENDING_R2 0x51 +#define INT_PENDING_R3 0x52 +#define INT_PENDING_R4 0x53 + +#define INT_DBG_LATCH_R1 0x60 +#define INT_DBG_LATCH_R2 0x61 +#define INT_DBG_LATCH_R3 0x62 +#define INT_DBG_LATCH_R4 0x63 + +#define INT_CLEAR_R1 0x70 +#define INT_CLEAR_R2 0x71 +#define INT_CLEAR_R3 0x72 +#define INT_CLEAR_R4 0x73 + +#define INT_MASK_R1 0x80 +#define INT_MASK_R2 0x81 +#define INT_MASK_R3 0x82 +#define INT_MASK_R4 0x83 + +#define INT_SET_MASK_R1 0x90 +#define INT_SET_MASK_R2 0x91 +#define INT_SET_MASK_R3 0x92 +#define INT_SET_MASK_R4 0x93 + +#define INT_CLEAR_MASK_R1 0xA0 +#define INT_CLEAR_MASK_R2 0xA1 +#define INT_CLEAR_MASK_R3 0xA2 +#define INT_CLEAR_MASK_R4 0xA3 + +#define INT_SRC_R1 0xB0 +#define INT_SRC_R2 0xB1 +#define INT_SRC_R3 0xB2 +#define INT_SRC_R4 0xB3 + +#define PMIC_MAX_REGISTER_ADDRESS INT_SRC_R4 + +#define STPMIC1_PMIC_NUM_IRQ_REGS 4 + +#define TURN_OFF_SR_ICC_EVENT 0x08 + +#define LDO_VOLTAGE_MASK GENMASK(6, 2) +#define BUCK_VOLTAGE_MASK GENMASK(7, 2) +#define LDO_BUCK_VOLTAGE_SHIFT 2 + +#define LDO_ENABLE_MASK BIT(0) +#define BUCK_ENABLE_MASK BIT(0) + +#define BUCK_HPLP_ENABLE_MASK BIT(1) +#define BUCK_HPLP_SHIFT 1 + +#define STDBY_ENABLE_MASK BIT(0) + +#define BUCKS_PD_CR_REG_MASK GENMASK(7, 0) +#define BUCK_MASK_RANK_REGISTER_MASK GENMASK(3, 0) +#define BUCK_MASK_RESET_REGISTER_MASK GENMASK(3, 0) +#define LDO1234_PULL_DOWN_REGISTER_MASK GENMASK(7, 0) +#define LDO56_VREF_PD_CR_REG_MASK GENMASK(5, 0) +#define LDO_MASK_RANK_REGISTER_MASK GENMASK(5, 0) +#define LDO_MASK_RESET_REGISTER_MASK GENMASK(5, 0) + +#define BUCK1_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK1_PULL_DOWN_MASK BIT(0) +#define BUCK2_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK2_PULL_DOWN_MASK BIT(2) +#define BUCK3_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK3_PULL_DOWN_MASK BIT(4) +#define BUCK4_PULL_DOWN_REG BUCKS_PD_CR +#define BUCK4_PULL_DOWN_MASK BIT(6) + +#define LDO1_PULL_DOWN_REG LDO14_PD_CR +#define LDO1_PULL_DOWN_MASK BIT(0) +#define LDO2_PULL_DOWN_REG LDO14_PD_CR +#define LDO2_PULL_DOWN_MASK BIT(2) +#define LDO3_PULL_DOWN_REG LDO14_PD_CR +#define LDO3_PULL_DOWN_MASK BIT(4) +#define LDO4_PULL_DOWN_REG LDO14_PD_CR +#define LDO4_PULL_DOWN_MASK BIT(6) +#define LDO5_PULL_DOWN_REG LDO56_VREF_PD_CR +#define LDO5_PULL_DOWN_MASK BIT(0) +#define LDO6_PULL_DOWN_REG LDO56_VREF_PD_CR +#define LDO6_PULL_DOWN_MASK BIT(2) +#define VREF_DDR_PULL_DOWN_REG LDO56_VREF_PD_CR +#define VREF_DDR_PULL_DOWN_MASK BIT(4) + +#define BUCKS_ICCTO_CR_REG_MASK GENMASK(6, 0) +#define LDOS_ICCTO_CR_REG_MASK GENMASK(5, 0) + +#define LDO_BYPASS_MASK BIT(7) + +/* Main PMIC Control Register + * SWOFF_PWRCTRL_CR + * Address : 0x10 + */ +#define ICC_EVENT_ENABLED BIT(4) +#define PWRCTRL_POLARITY_HIGH BIT(3) +#define PWRCTRL_PIN_VALID BIT(2) +#define RESTART_REQUEST_ENABLED BIT(1) +#define SOFTWARE_SWITCH_OFF_ENABLED BIT(0) + +/* Main PMIC PADS Control Register + * PADS_PULL_CR + * Address : 0x11 + */ +#define WAKEUP_DETECTOR_DISABLED BIT(4) +#define PWRCTRL_PD_ACTIVE BIT(3) +#define PWRCTRL_PU_ACTIVE BIT(2) +#define WAKEUP_PD_ACTIVE BIT(1) +#define PONKEY_PU_ACTIVE BIT(0) + +/* Main PMIC VINLOW Control Register + * VBUS_DET_VIN_CRC DMSC + * Address : 0x15 + */ +#define SWIN_DETECTOR_ENABLED BIT(7) +#define SWOUT_DETECTOR_ENABLED BIT(6) +#define VINLOW_ENABLED BIT(0) +#define VINLOW_CTRL_REG_MASK GENMASK(7, 0) + +/* USB Control Register + * Address : 0x40 + */ +#define BOOST_OVP_DISABLED BIT(7) +#define VBUS_OTG_DETECTION_DISABLED BIT(6) +#define SW_OUT_DISCHARGE BIT(5) +#define VBUS_OTG_DISCHARGE BIT(4) +#define OCP_LIMIT_HIGH BIT(3) +#define SWIN_SWOUT_ENABLED BIT(2) +#define USBSW_OTG_SWITCH_ENABLED BIT(1) +#define BOOST_ENABLED BIT(0) + +/* PKEY_TURNOFF_CR + * Address : 0x16 + */ +#define PONKEY_PWR_OFF BIT(7) +#define PONKEY_CC_FLAG_CLEAR BIT(6) +#define PONKEY_TURNOFF_TIMER_MASK GENMASK(3, 0) +#define PONKEY_TURNOFF_MASK GENMASK(7, 0) + +/* + * struct stpmic1 - stpmic1 master device for sub-drivers + * @dev: master device of the chip (can be used to access platform data) + * @irq: main IRQ number + * @regmap_irq_chip_data: irq chip data + */ +struct stpmic1 { + struct device *dev; + struct regmap *regmap; + int irq; + struct regmap_irq_chip_data *irq_data; +}; + +#endif /* __LINUX_MFD_STPMIC1_H */ -- 1.9.1