Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S263345AbTK1S0s (ORCPT ); Fri, 28 Nov 2003 13:26:48 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S263357AbTK1S0s (ORCPT ); Fri, 28 Nov 2003 13:26:48 -0500 Received: from fed1mtao04.cox.net ([68.6.19.241]:17131 "EHLO fed1mtao04.cox.net") by vger.kernel.org with ESMTP id S263345AbTK1S0h (ORCPT ); Fri, 28 Nov 2003 13:26:37 -0500 Date: Fri, 28 Nov 2003 11:26:25 -0700 From: Tom Rini To: Linus Torvalds , henning@meier-geinitz.de, greg@kroah.com Cc: Kernel Mailing List , linux-usb-users@lists.sourceforge.net Subject: USB scanner issue (Was: Re: Beaver in Detox!) Message-ID: <20031128182625.GP2541@stop.crashing.org> References: Mime-Version: 1.0 Content-Type: text/plain; charset=unknown-8bit Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.5.4i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12857 Lines: 270 On Wed, Nov 26, 2003 at 12:55:00PM -0800, Linus Torvalds wrote: [snip] > I give you "Beaver in Detox", aka linux-2.6.0-test11. This is mainly > brought on by the fact that the old aic7xxx driver was broken in -test10, > and Ingo found this really evil test program that showed an error case in > do_fork() that we had never handled right. Well, duh! I've found an odd problem that's in at least 2.6.0-test11. I've reproduced this twice now with an Epson 1240 USB scanner (0x04b8/0x010b). What happens is if I run xsane from gimp, acquire a preview, start to scan and then cancel, the scanner becomes unresponsive. If I try and quit xsane, it gets stuck. Unplugging / replugging and then trying to kill xsane locked the machine up hard. Here's ver_linux, dmesg and the versions of gimp/xsane I'm running (I've used the scanner during this boot, without trying to lock it up): --- If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux Bill-The-Cat 2.6.0-test11 #1 Wed Nov 26 15:09:13 MST 2003 i686 GNU/Linux Gnu C 3.3.2 Gnu make 3.80 util-linux 2.12 mount 2.12 module-init-tools 0.9.15-pre3 e2fsprogs 1.35-WIP nfs-utils 1.0.6 Linux C Library 2.3.2 Dynamic linker (ldd) 2.3.2 Procps 3.1.14 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 5.0 Modules Loaded mousedev hid scanner snd_usb_audio nfsd exportfs lockd sunrpc snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore sis900 crc32 af_packet ohci_hcd usbcore rtc --- Linux version 2.6.0-test11 (root@Bill-The-Cat) (gcc version 3.3.2 (Debian)) #1 Wed Nov 26 15:09:13 MST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ee000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data) BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa340 ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0000 ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x1fff0030 ACPI: DSDT (v001 SiS 735 0x00000100 MSFT 0x0100000d) @ 0x00000000 Building zonelist for node : 0 Kernel command line: root=/dev/hda1 ro video=1280x1024-8@85 hdc=scsi hdd=scsi ide_setup: hdc=scsi ide_setup: hdd=scsi Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1526.853 MHz processor. Console: colour dummy device 80x25 Memory: 515884k/524224k available (1451k kernel code, 7592k reserved, 641k data, 136k init, 0k highmem) Calibrating delay loop... 3022.84 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0183fbff c1c3fbff 00000000 00000000 CPU: After vendor identify, caps: 0183fbff c1c3fbff 00000000 00000000 Enabling disabled K7/SSE Support. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1800+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1526.0579 MHz. ..... host bus clock speed is 265.0492 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 ACPI: IRQ 9 was Edge Triggered, setting to Level Triggerd spurious 8259A interrupt: IRQ7. ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' matroxfb: Matrox G450 detected matroxfb: MTRR's turned on matroxfb: 1280x1024x8bpp (virtual: 1280x65536) matroxfb: framebuffer at 0xCC000000, mapped to 0xe080c000, size 33554432 fb0: MATROX frame buffer device fb0: initializing hardware ikconfig 0.7 with /proc/config* ACPI: Processor [CPU1] (supports C1) Console: switching to colour frame buffer device 160x64 pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS735 ATA 100 (2nd gen) controller ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD1200JB-00DUA3, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: ASUS DRW-0402P/D, ATAPI CD/DVD-ROM drive hdd: MATSHITADVD-ROM SR-8583, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 > Console: switching to colour frame buffer device 160x64 matroxfb_crtc2: secondary head of fb0 was registered as fb1 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 BIOS EDD facility v0.10 2003-Oct-11, 1 devices found Please report your BIOS at http://domsch.com/linux/edd30/results.html kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 136k freed Adding 498004k swap on /dev/hda3. Priority:-1 extents:1 EXT3 FS on hda1, internal journal Real Time Clock Driver v1.12 kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:02.2: OHCI Host Controller ohci_hcd 0000:00:02.2: irq 12, pci mem e2856000 ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ohci_hcd 0000:00:02.3: OHCI Host Controller ohci_hcd 0000:00:02.3: irq 5, pci mem e2858000 ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: new USB device on port 2, assigned address 2 hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected NET: Registered protocol family 17 sis900.c: v1.08.06 9/24/2002 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:0a:e6:14:a9:a5. hub 2-2:1.0: new USB device on port 1, assigned address 3 hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 3 ports detected hub 2-2:1.0: new USB device on port 2, assigned address 4 hub 2-2:1.0: new USB device on port 3, assigned address 5 hub 2-2:1.0: new USB device on port 4, assigned address 6 hub 2-2.1:1.0: new USB device on port 1, assigned address 7 eth0: Media Link On 100mbps full-duplex eth0: Media Link On 100mbps full-duplex intel8x0: clocking to 48000 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). drivers/usb/core/usb.c: registered new driver snd-usb-audio drivers/usb/image/scanner.c: USB scanner device (0x04b8/0x010b) now attached to usb/scanner0 drivers/usb/core/usb.c: registered new driver usbscanner drivers/usb/image/scanner.c: 0.4.15:USB Scanner Driver input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Optical] on usb-0000:00:02.3-2.4 drivers/usb/input/hid-core.c: ctrl urb status -2 received drivers/usb/input/hid-core.c: timeout initializing reports input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:02.3-2.1.1 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:02.3-2.1.1 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice [drm:drm_init] *ERROR* Cannot initialize the agpgart module. usb 2-2: USB disconnect, address 2 usb 2-2.1: USB disconnect, address 3 usb 2-2.1.1: USB disconnect, address 7 usb 2-2.2: USB disconnect, address 4 usb 2-2.3: USB disconnect, address 5 usb 2-2.4: USB disconnect, address 6 hub 2-0:1.0: new USB device on port 2, assigned address 8 hub 2-2:1.0: USB hub found hub 2-2:1.0: 4 ports detected hub 2-2:1.0: new USB device on port 1, assigned address 9 hub 2-2.1:1.0: USB hub found hub 2-2.1:1.0: 3 ports detected hub 2-2:1.0: new USB device on port 2, assigned address 10 hub 2-2:1.0: new USB device on port 3, assigned address 11 drivers/usb/image/scanner.c: USB scanner device (0x04b8/0x010b) now attached to usb/scanner0 hub 2-2:1.0: new USB device on port 4, assigned address 12 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Optical] on usb-0000:00:02.3-2.4 hub 2-2.1:1.0: new USB device on port 1, assigned address 13 drivers/usb/input/hid-core.c: ctrl urb status -2 received drivers/usb/input/hid-core.c: timeout initializing reports input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:02.3-2.1.1 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0000:00:02.3-2.1.1 usb 2-2: USB disconnect, address 8 usb 2-2.1: USB disconnect, address 9 usb 2-2.1.1: USB disconnect, address 13 usb 2-2.2: USB disconnect, address 10 usb 2-2.3: USB disconnect, address 11 usb 2-2.4: USB disconnect, address 12 -- ii gimp1.2 1.2.3-2.4 The GNU Image Manipulation Program, stable ver ii gimpprint-loca 4.2.5-6 Locale data files for Gimp-Print ii libgimp1.2 1.2.3-2.4 Libraries necessary to run the GIMP, version 1 ii libgimpprint1 4.2.5-6 The Gimp-Print printer driver library ii xsane 0.91-6 A gtk-based X11 frontend for SANE (Scanner Acc -- Tom Rini http://gate.crashing.org/~trini/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/