Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-version: 1.0
Content-transfer-encoding: 8BIT
Content-type: text/plain; charset="UTF-8"
Message-id: <5BC6C201.70508@samsung.com>
Date:   Wed, 17 Oct 2018 14:00:49 +0900
From:   Chanwoo Choi <cw00.choi@samsung.com>
Organization: Samsung Electronics
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101
        Thunderbird/31.6.0
To:     Marek Szyprowski <m.szyprowski@samsung.com>,
        linux-samsung-soc@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Will Deacon <will.deacon@arm.com>,
        Catalin Marinas <catalin.marinas@arm.com>,
        Marc Zyngier <marc.zyngier@arm.com>,
        Thomas Gleixner <tglx@linutronix.de>,
        Daniel Lezcano <daniel.lezcano@linaro.org>,
        Krzysztof Kozlowski <krzk@kernel.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
        Inki Dae <inki.dae@samsung.com>
Subject: Re: [PATCH v2 3/6] clocksource: exynos_mct: Add arch_timer
 cooperation mode for ARM64
In-reply-to: <20181015123112.9379-4-m.szyprowski@samsung.com>
CMS-TYPE: 102P
DLP-Filter: Pass
References: <20181015123112.9379-1-m.szyprowski@samsung.com>
        <CGME20181015123135eucas1p16a10ed68040141a714ab2977e2ad5e2d@eucas1p1.samsung.com>
        <20181015123112.9379-4-m.szyprowski@samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Hi Marek,

I tested it about kernel booting and CPU hotplug through sysfs path 
on ARM64 Exynos5433-based TM2 board. It is well working.

Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>

But,
I have a minor comment for code clean-up.
On exynos4_mct_starting_cpu() function, the initialization of 'evt' instance
are not mandatory because 'evt' instance is not registered
by clockevents_config_and_register(). 


On 2018년 10월 15일 21:31, Marek Szyprowski wrote:
> To get ARM Architected Timers working on Samsung Exynos SoCs, one has to
> first configure and enable Exynos Multi-Core Timer, because they both
> share some common hardware blocks. This patch adds a mode of cooperation
> with arch_timer driver, so kernel can use CP15 based timer interface via
> arch_timer driver, which is mandatory on ARM64. In such mode driver only
> configures MCT registers and starts the timer but don't register any
> clocksource or events in the system. Those are left to be handled by
> arch_timer driver.
> 
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
>  drivers/clocksource/exynos_mct.c | 52 +++++++++++++++++++++-----------
>  1 file changed, 35 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c
> index a379f11fad2d..06cd30a6d59a 100644
> --- a/drivers/clocksource/exynos_mct.c
> +++ b/drivers/clocksource/exynos_mct.c
> @@ -57,6 +57,7 @@
>  #define TICK_BASE_CNT	1
>  
>  enum {
> +	MCT_INT_NONE = 0,
>  	MCT_INT_SPI,
>  	MCT_INT_PPI
>  };
> @@ -238,6 +239,9 @@ static int __init exynos4_clocksource_init(void)
>  {
>  	exynos4_mct_frc_start();
>  
> +	if (!mct_int_type)
> +		return 0;
> +
>  #if defined(CONFIG_ARM)
>  	exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
>  	exynos4_delay_timer.freq = clk_rate;
> @@ -343,6 +347,9 @@ static struct irqaction mct_comp_event_irq = {
>  
>  static int exynos4_clockevent_init(void)
>  {
> +	if (!mct_int_type)
> +		return 0;
> +
>  	mct_comp_device.cpumask = cpumask_of(0);
>  	clockevents_config_and_register(&mct_comp_device, clk_rate,
>  					0xf, 0xffffffff);
> @@ -476,12 +483,12 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
>  
>  		irq_force_affinity(evt->irq, cpumask_of(cpu));
>  		enable_irq(evt->irq);
> -	} else {
> +	} else if (mct_int_type == MCT_INT_PPI) {
>  		enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
>  	}
> -	clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
> -					0xf, 0x7fffffff);
> -
> +	if (mct_int_type)
> +		clockevents_config_and_register(evt,
> +			       clk_rate / (TICK_BASE_CNT + 1), 0xf, 0x7fffffff);
>  	return 0;
>  }
>  
> @@ -496,7 +503,7 @@ static int exynos4_mct_dying_cpu(unsigned int cpu)
>  		if (evt->irq != -1)
>  			disable_irq_nosync(evt->irq);
>  		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
> -	} else {
> +	} else if (mct_int_type == MCT_INT_PPI) {
>  		disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
>  	}
>  	return 0;
> @@ -529,7 +536,7 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
>  					 &percpu_mct_tick);
>  		WARN(err, "MCT: can't request IRQ %d (%d)\n",
>  		     mct_irqs[MCT_L0_IRQ], err);
> -	} else {
> +	} else if (mct_int_type == MCT_INT_SPI) {
>  		for_each_possible_cpu(cpu) {
>  			int mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
>  			struct mct_clock_event_device *pcpu_mevt =
> @@ -564,7 +571,7 @@ static int __init exynos4_timer_resources(struct device_node *np, void __iomem *
>  out_irq:
>  	if (mct_int_type == MCT_INT_PPI) {
>  		free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
> -	} else {
> +	} else if (mct_int_type == MCT_INT_SPI) {
>  		for_each_possible_cpu(cpu) {
>  			struct mct_clock_event_device *pcpu_mevt =
>  				per_cpu_ptr(&percpu_mct_tick, cpu);
> @@ -585,17 +592,28 @@ static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
>  
>  	mct_int_type = int_type;
>  
> -	/* This driver uses only one global timer interrupt */
> -	mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
> +	if (IS_ENABLED(CONFIG_ARM64) && IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
> +		struct device_node *np = of_find_compatible_node(NULL, NULL,
> +							     "arm,armv8-timer");
> +		if (np) {
> +			mct_int_type = MCT_INT_NONE;
> +			of_node_put(np);
> +		}
> +	}
>  
> -	/*
> -	 * Find out the number of local irqs specified. The local
> -	 * timer irqs are specified after the four global timer
> -	 * irqs are specified.
> -	 */
> -	nr_irqs = of_irq_count(np);
> -	for (i = MCT_L0_IRQ; i < nr_irqs; i++)
> -		mct_irqs[i] = irq_of_parse_and_map(np, i);
> +	if (mct_int_type) {
> +		/* This driver uses only one global timer interrupt */
> +		mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
> +
> +		/*
> +		 * Find out the number of local irqs specified. The local
> +		 * timer irqs are specified after the four global timer
> +		 * irqs are specified.
> +		 */
> +		nr_irqs = of_irq_count(np);
> +		for (i = MCT_L0_IRQ; i < nr_irqs; i++)
> +			mct_irqs[i] = irq_of_parse_and_map(np, i);
> +	}
>  
>  	ret = exynos4_timer_resources(np, of_iomap(np, 0));
>  	if (ret)
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics