Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To:     Zhang Rui <rui.zhang@intel.com>,
        Eduardo Valentin <edubezval@gmail.com>
Cc:     Amit kucheria <amit.kucheria@linaro.org>,
        Eric Anholt <eric@anholt.net>,
        Stefan Wahren <stefan.wahren@i2se.com>,
        Markus Mayer <mmayer@broadcom.com>,
        bcm-kernel-feedback-list@broadcom.com,
        Heiko Stuebner <heiko@sntech.de>,
        Thierry Reding <thierry.reding@gmail.com>,
        Jonathan Hunter <jonathanh@nvidia.com>,
        Keerthy <j-keerthy@ti.com>,
        Masahiro Yamada <yamada.masahiro@socionext.com>,
        Jun Nie <jun.nie@linaro.org>,
        Baoyou Xie <baoyou.xie@linaro.org>,
        Shawn Guo <shawnguo@kernel.org>, linux-pm@vger.kernel.org,
        linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com
Subject: [PATCH v2 06/17] thermal: brcmstb: enable+check sensor after its
 setup is finished
Date:   Wed, 17 Oct 2018 17:52:32 +0200
Message-id: <1539791563-5959-7-git-send-email-b.zolnierkie@samsung.com>
In-reply-to: <1539791563-5959-1-git-send-email-b.zolnierkie@samsung.com>
CMS-TYPE: 101P
References: <1539791563-5959-1-git-send-email-b.zolnierkie@samsung.com>
        <CGME20181017155351epcas1p171637911ef29cdec96dda648cfac51a5@epcas1p1.samsung.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

Enable+check sensor after setting priv->thermal.

Cc: Markus Mayer <mmayer@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
 drivers/thermal/broadcom/brcmstb_thermal.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c
index 3511ce6..5650a6a 100644
--- a/drivers/thermal/broadcom/brcmstb_thermal.c
+++ b/drivers/thermal/broadcom/brcmstb_thermal.c
@@ -336,11 +336,11 @@ static int brcmstb_thermal_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	priv->thermal = thermal;
+
 	thermal_zone_set_mode(thermal, THERMAL_DEVICE_ENABLED);
 	thermal_zone_device_check(thermal);
 
-	priv->thermal = thermal;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "could not get IRQ\n");
-- 
1.9.1