Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265506AbUABMoX (ORCPT ); Fri, 2 Jan 2004 07:44:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265526AbUABMoX (ORCPT ); Fri, 2 Jan 2004 07:44:23 -0500 Received: from witte.sonytel.be ([80.88.33.193]:49087 "EHLO witte.sonytel.be") by vger.kernel.org with ESMTP id S265506AbUABMoV (ORCPT ); Fri, 2 Jan 2004 07:44:21 -0500 Date: Fri, 2 Jan 2004 13:44:07 +0100 (MET) From: Geert Uytterhoeven To: Claas Langbehn cc: Linux Kernel Development , =?iso-8859-15?Q?Dani=EBl_Mantione?= Subject: Re: 2.6.0: atyfb broken In-Reply-To: <20040101215308.GA16921@rootdir.de> Message-ID: References: <20031230212609.GA4267@rootdir.de> <20040101215308.GA16921@rootdir.de> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2049 Lines: 54 On Thu, 1 Jan 2004, Claas Langbehn wrote: > > > I have got an HP omnibook 4150B. When booting with atyfb, > > > the kernel messages look great: > > > > > > atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 50 Mhz MCLK > > > fb0: ATY Mach64 frame buffer device on PCI > > > > > > But either the screen is black and I see only the cursor and Background > > > colors (CONFIG_FRAMEBUFFER_CONSOLE disabled), but X11 starts fine. > > > > Does your notebook work with the atyfb in 2.4.23? With the one in 2.4.22 and > > earlier? > > with 2.4.23 it does not work either. > > dmesg says: > > atyfb: using auxiliary register aperture > atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000. > atyfb: BIOS contains driver information table. > atyfb: colour active matrix monitor detected: CPT CLAA141XB01 > id=10, 1024x768 pixels, 262144 colours (LT mode) > supports 60 Hz refresh rates, default 60 Hz > LCD CRTC parameters: 15384 167 127 130 0 17 805 767 769 6 > atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SDRAM, 29.498928 MHz XTAL, > 230 MHz PLL, 83 Mhz MCLK, 125 Mhz XCLK > Console: switching to colour frame buffer device 80x25 > fb0: ATY Mach64 frame buffer device on PCI > > > When booting the screen gets slowly flooded with white. > X11 works anyway. > > dmesg's output shows different MCLK and XCLK with kernel 2.4.23 > (see above). Does it work with 2.4.22 and earlier? Mobility support was changed a lot in 2.4.23. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/