Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265619AbUABTtX (ORCPT ); Fri, 2 Jan 2004 14:49:23 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265624AbUABTtX (ORCPT ); Fri, 2 Jan 2004 14:49:23 -0500 Received: from main.gmane.org ([80.91.224.249]:41152 "EHLO main.gmane.org") by vger.kernel.org with ESMTP id S265619AbUABTs4 (ORCPT ); Fri, 2 Jan 2004 14:48:56 -0500 X-Injected-Via-Gmane: http://gmane.org/ To: linux-kernel@vger.kernel.org From: Jens Benecke Subject: 2.6.0-mjb2 useage report (K7-2400/1G/IDE/ASUS-nForce2) Date: Fri, 02 Jan 2004 20:48:54 +0100 Message-ID: <3554040.5Ujn9dJA3e@spamfreemail.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7Bit X-Complaints-To: usenet@sea.gmane.org User-Agent: KNode/0.7.6 X-No-Archive: Yes Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12576 Lines: 292 Hi, this is a simple user's report on switching to 2.6.0 from 2.4.22. so far, 2.6.0 hasn't made things worse here. I can use my scanner (epson USB), I can use mouse (USB) XFree86 4.3 and NVIDIA driver (with the patches from minion.de). I can use MPlayer to play movie files and listen to music with the new ALSA drivers (I used ALSA before though). Good work! 2.4.1 (the first 2.4 I used) was much worse. Not to speak of the later 2.4 kernel versions ... ;) I don't notice any real preformance improvement over 2.4.2x, though. Most everything works, although there are a few tidbits: - LOCAL_APIC and PNPBIOS made my laptop crash before it could even write any boot messages on the screen. (I posted about this earlier). - Not putting the X server to -10 nice level (as told in the 2.6 HOWTO I dug up somewhere, that also mentioned module-init-tools etc) makes my mouse jitter whenever a process eats 100% CPU. That is not nice. XMMS also skips a second then. The X server also freezes for a seond from time to time for no apparent reason (other than the CPU useage going up). I have Folding@Home clients running on this machine (nice=19) and usually don't notice them at all though. - Inserting my external IDE->USB/Firewire harddisk into the internal USB slot (nForce2 mainboard) made Linux go into an endless loop: lockd: failed to monitor 192.168.1.100 ehci_hcd 0000:00:02.2: GetStatus port 4 status 003402 POWER OWNER sig=k CSC hub 1-0:1.0: port 4, status 0, change 1, 12 Mb/s ehci_hcd 0000:00:02.2: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s hub 1-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501 ehci_hcd 0000:00:02.2: port 5 high speed ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT hub 1-0:1.0: new USB device on port 5, assigned address 3 usb 1-5: new device strings: Mfr=1, Product=2, SerialNumber=0 message.c: USB device number 3 default language ID 0x409 usb 1-5: Product: Mass Storage Device usb 1-5: Manufacturer: Prolific Technology Inc. usb.c: usb_hotplug usb 1-5: registering 1-5:1.0 (config #1, interface 0) usb.c: usb_hotplug usbscanner 1-5:1.0: usb_probe_interface usbscanner 1-5:1.0: usb_probe_interface - got id Initializing USB Mass Storage driver... usb-storage 1-5:1.0: usb_probe_interface usb-storage 1-5:1.0: usb_probe_interface - got id usb-storage: USB Mass Storage device detected usb-storage: act_altsetting is 0, id_index is 103 usb-storage: -- associate_dev usb-storage: Transport: Bulk usb-storage: Protocol: Transparent SCSI usb-storage: Endpoints: In: 0xed5e9c60 Out: 0xed5e9c4c Int: 0x00000000 (Period 0) usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 usb-storage: GetMaxLUN command result is 1, data is 0 usb-storage: *** thread sleeping. scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 24 00 usb-storage: Bulk Command S 0x43425355 T 0x1b L 36 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes usb-storage: Status code 0; transferred 36/36 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x0 usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. Vendor: Maxtor 6 Model: Y200P0 Rev: YAR4 Type: Direct-Access ANSI SCSI revision: 02 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad LUN (0:1) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (1:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (2:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (3:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (4:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (5:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (6:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (7:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 3 usb.c: registered new driver usb-storage USB Mass Storage support registered. nt[13470]: bogus sysfs DEVPATH=/devices/pci0000:00/0000:00:02.2 usb1/1-5/1-5:1.0/hos usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x24 L 0 F 0 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x24 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 usb-storage: Bulk Command S 0x43425355 T 0x25 L 8 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x25 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 398297089 512-byte hdwr sectors (203928 MB) sda: assuming drive cache: write through /dev/scsi/host2/bus0/target0/lun0:<7>usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: Bulk Command S 0x43425355 T 0x26 L 4096 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries usb-storage: Status code 0; transferred 4096/4096 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x26 R 0 Stat 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 17 bd 88 00 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x27 L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code -32; transferred 0/512 usb-storage: clearing endpoint halt for pipe 0xc0010380 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Bulk data transfer result 0x2 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x27 R 512 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: -- unexpectedly short transfer usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000027 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x80000027 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0 usb-storage: Unit Attention: Power on, reset, or bus device reset occurred usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 17 bd 88 00 00 00 01 00 usb-storage: Bulk Command S 0x43425355 T 0x28 L 512 F 128 Trg 0 LUN 0 CL 10 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code -32; transferred 0/512 usb-storage: clearing endpoint halt for pipe 0xc0010380 usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 usb-storage: usb_stor_clear_halt: result = 0 usb-storage: Bulk data transfer result 0x2 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 usb-storage: -- transfer complete usb-storage: Bulk status result = 0 usb-storage: Bulk Status S 0x53425355 T 0x28 R 512 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: -- unexpectedly short transfer usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk Command S 0x43425355 T 0x80000028 L 18 F 128 Trg 0 LUN 0 CL 6 usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes usb-storage: Status code 0; transferred 31/31 usb-storage: -- transfer complete usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes usb-storage: Status code 0; transferred 13/13 -- Jens Benecke - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/