Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Date:   Tue, 23 Oct 2018 11:10:27 +0200
From:   Boris Brezillon <boris.brezillon@bootlin.com>
To:     Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
Cc:     "Cristian.Birsan@microchip.com" <Cristian.Birsan@microchip.com>,
        Tudor Ambarus <tudor.ambarus@microchip.com>,
        "richard@nod.at" <richard@nod.at>, Mark Brown <broonie@kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "nicolas.ferre@microchip.com" <nicolas.ferre@microchip.com>,
        "marek.vasut@gmail.com" <marek.vasut@gmail.com>,
        "cyrille.pitchen@microchip.com" <cyrille.pitchen@microchip.com>,
        "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
        Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
        "computersforpeace@gmail.com" <computersforpeace@gmail.com>,
        "dwmw2@infradead.org" <dwmw2@infradead.org>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP
 SPI NOR flash memories
Message-ID: <20181023111027.54df8650@bbrezillon>
In-Reply-To: <VI1PR04MB103882359E835334D19177E299F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
References: <20180911154007.17195-1-tudor.ambarus@microchip.com>
        <20181022111543.2a607efc@bbrezillon>
        <VI1PR04MB1038EF892921194D1BFDE6FC99F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022122659.0675942e@bbrezillon>
        <VI1PR04MB1038E92FFAB03E07048FD8B499F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022124627.2c6c3b93@bbrezillon>
        <20181022125259.42df83ea@bbrezillon>
        <VI1PR04MB1038C9C889185F2A700220F299F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022134324.2c1bd248@bbrezillon>
        <VI1PR04MB1038E072BFFD09C7C19AD2F899F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022135211.1978c25d@bbrezillon>
        <VI1PR04MB1038B9A5A8C59E6CB0863FF599F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181023073946.138b287e@bbrezillon>
        <VI1PR04MB10381C2DC4052E636BA26ADA99F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181023104827.77e7775b@bbrezillon>
        <20181023110122.27f73100@bbrezillon>
        <VI1PR04MB103882359E835334D19177E299F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Tue, 23 Oct 2018 09:05:23 +0000
Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> wrote:

> Hi,
> 
> > -----Original Message-----
> > From: Boris Brezillon [mailto:boris.brezillon@bootlin.com]
> > Sent: Tuesday, October 23, 2018 2:31 PM
> > To: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
> > Cc: Cristian.Birsan@microchip.com; Tudor Ambarus
> > <tudor.ambarus@microchip.com>; richard@nod.at; Mark Brown
> > <broonie@kernel.org>; linux-kernel@vger.kernel.org;
> > nicolas.ferre@microchip.com; marek.vasut@gmail.com;
> > cyrille.pitchen@microchip.com; linux-mtd@lists.infradead.org; Cyrille Pitchen
> > <cyrille.pitchen@wedev4u.fr>; computersforpeace@gmail.com;
> > dwmw2@infradead.org; linux-arm-kernel@lists.infradead.org
> > Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
> > NOR flash memories
> > 
> > On Tue, 23 Oct 2018 10:48:27 +0200
> > Boris Brezillon <boris.brezillon@bootlin.com> wrote:
> >   
> > > On Tue, 23 Oct 2018 08:18:35 +0000
> > > Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> wrote:
> > >  
> > > >
> > > > I have added the prints in m25p80_read() and in flexspi controller prepare_lut  
> > and read_rxfifo() func.  
> > > > In these have added prints for data variable of struct op and data which  
> > being read by the controller from the flash.  
> > > >
> > > > [    2.091467] smpt[0]=[addr_width:00000003, read_dumy:00000008,  
> > read_opcode:00000065, data_mask:00000008]  
> > > > [    2.099113] m25p80_read, nor[op:00000065 addr_width:00000003,  
> > dummy:00000008, len:00000001  
> > > > [    2.107367] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3,  
> > bwidth:1]  
> > > > [    2.114753] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,  
> > nbytes:1]  
> > > > [    2.121706] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:4,  
> > nbytes:3, bwidth:1]  
> > > > [    2.129786] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > > > [    2.136132] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465  
> > 1:24003008      2:0     3:0]  
> > > > [    2.144223] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > > > [    2.151004] smpt_read[1] addr[00000004], data_byte[00000000]  
> > err:00000000  
> > > >
> > > >
> > > > [    2.157782] smpt[2]=[addr_width:00000003, read_dumy:00000008,  
> > read_opcode:00000065, data_mask:00000004]  
> > > > [    2.165429] m25p80_read, nor[op:00000065 addr_width:00000003,  
> > dummy:00000008, len:00000001  
> > > > [    2.173683] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:2, nbytes:3,  
> > bwidth:1]  
> > > > [    2.181068] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,  
> > nbytes:1]  
> > > > [    2.188021] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:2,  
> > nbytes:3, bwidth:1]  
> > > > [    2.196101] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > > > [    2.202447] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465  
> > 1:24003008      2:0     3:0]  
> > > > [    2.210539] nxp_fspi_read_rxfifo, ReadData op.buf[0x02]
> > > > [    2.217319] smpt_read[3] addr[00000002], data_byte[00000002]  
> > err:00000000  
> > > >
> > > >
> > > > [    2.224098] smpt[4]=[addr_width:00000003, read_dumy:00000008,  
> > read_opcode:00000065, data_mask:00000002]  
> > > > [    2.231744] m25p80_read, nor[op:00000065 addr_width:00000003,  
> > dummy:00000008, len:00000001  
> > > > [    2.239998] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3,  
> > bwidth:1]  
> > > > [    2.247383] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,  
> > nbytes:1]  
> > > > [    2.254336] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:4,  
> > nbytes:3, bwidth:1]  
> > > > [    2.262416] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > > > [    2.268762] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465  
> > 1:24003008      2:0     3:0]  
> > > > [    2.276854] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > > > [    2.283634] smpt_read[5] addr[00000004], data_byte[00000000]  
> > err:00000000  
> > > >
> > > >
> > > > [    2.290412] spi_nor_get_map_in_use:2915 map_id=0 smpt_len:16 i=:6
> > > > [    2.296496] End [addr_width:00000003, read_dumy:00000008,  
> > read_opcode:00000065] ReturnVal:00000000  
> > > > [    2.305444] spi_nor_parse_smpt:3065
> > > > [    2.308924] m25p80 spi0.0: failed to parse SMPT (err = -22)
> > > >
> > > >  
> > > > >
> > > > > Next thing you can do is read the CR2NV reg (using the RDAR command)  
> > and  
> > > > > check the RL (Read Latency) and AL (Address Length) values.  
> > > >
> > > > Please let me know how to read CR2NV register.  
> > >
> > > Actually, RDAR is already what you use to read the map_id, and we need
> > > to use it to read the register that contains the number of dummy
> > > cycles and the number of address bytes to use for RDAR operations.
> > > Looks like we have a chicken and egg situation here :-).
> > >
> > > Let's try something else:
> > >
> > > 1/ create an u8 array of 16 entries named data_bytes
> > >
> > > for each loop iteration (the first for loop):
> > > 2/ set ->addr_width to 3 and ->read_dummy to 0 3/ call
> > > spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes) 4/
> > > dump the data_bytes buf 5/ set ->addr_width to 4 6/ call
> > > spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes) 7/
> > > dump the data_bytes buf
> > >
> > > If the SPI driver is working correctly, we should be able to figure
> > > out the right value for ->addr_width and ->read_dummy.  
> > 
> > Also, can you add traces in nxp_fspi_read_rxfifo() to print the value returned by
> > f->read(base + FSPI_RFDR + j * 4) (there are 2 of them).  
> 
> I have added this and printing the data content, all 4 bytes, after each f->read(base + FSPI_RFDR + j * 4);
> This I have shown in the logs, only 1 byte i.e. as we are reading only 1 byte so I have deleted content of rest 3 bytes when sending the logs in mail.

But I do care about the remaining 3 bytes, otherwise I wouldn't ask you
to print them. Please print the full reg content using %08x.