Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
To:     Boris Brezillon <boris.brezillon@bootlin.com>
CC:     "Cristian.Birsan@microchip.com" <Cristian.Birsan@microchip.com>,
        Tudor Ambarus <tudor.ambarus@microchip.com>,
        "richard@nod.at" <richard@nod.at>, Mark Brown <broonie@kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        "nicolas.ferre@microchip.com" <nicolas.ferre@microchip.com>,
        "marek.vasut@gmail.com" <marek.vasut@gmail.com>,
        "cyrille.pitchen@microchip.com" <cyrille.pitchen@microchip.com>,
        "linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
        Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>,
        "computersforpeace@gmail.com" <computersforpeace@gmail.com>,
        "dwmw2@infradead.org" <dwmw2@infradead.org>,
        "linux-arm-kernel@lists.infradead.org" 
        <linux-arm-kernel@lists.infradead.org>
Subject: RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
 NOR flash memories
Thread-Topic: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
 NOR flash memories
Thread-Index: AQHUSeYwGQ074lVuqESxUXlBIHGe8qUh1lUwgABb2gCAABY6gIAAnHVQgABXcQCAAADvgIAABUuAgAACP9CAACWwgIAHmPMggAA4ZoCAAAyv0IAABzqAgAAC3GCAAAKVgIAAAdOAgAACLYCAAAvpAIAAAL7QgAABtoCAARoEIIAAEEQAgAAqy8CAAAnsgIAAA5wAgAAAe9A=
Date:   Tue, 23 Oct 2018 09:05:23 +0000
Message-ID: <VI1PR04MB103882359E835334D19177E299F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
References: <20180911154007.17195-1-tudor.ambarus@microchip.com>
        <20181017115237.07310b74@bbrezillon>
        <VI1PR04MB1038BD6103DD8BD6B6DEC2B899F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022111543.2a607efc@bbrezillon>
        <VI1PR04MB1038EF892921194D1BFDE6FC99F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022122659.0675942e@bbrezillon>
        <VI1PR04MB1038E92FFAB03E07048FD8B499F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022124627.2c6c3b93@bbrezillon>    <20181022125259.42df83ea@bbrezillon>
        <VI1PR04MB1038C9C889185F2A700220F299F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022134324.2c1bd248@bbrezillon>
        <VI1PR04MB1038E072BFFD09C7C19AD2F899F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181022135211.1978c25d@bbrezillon>
        <VI1PR04MB1038B9A5A8C59E6CB0863FF599F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181023073946.138b287e@bbrezillon>
        <VI1PR04MB10381C2DC4052E636BA26ADA99F50@VI1PR04MB1038.eurprd04.prod.outlook.com>
        <20181023104827.77e7775b@bbrezillon> <20181023110122.27f73100@bbrezillon>
In-Reply-To: <20181023110122.27f73100@bbrezillon>
Accept-Language: en-US
Content-Language: en-US
received-spf: None (protection.outlook.com: nxp.com does not designate
 permitted sender hosts)
spamdiagnosticoutput: 1:99
spamdiagnosticmetadata: NSPM
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-MS-Exchange-CrossTenant-Network-Message-Id: 5537213a-2436-486b-42cc-08d638c6aab9
X-MS-Exchange-CrossTenant-originalarrivaltime: 23 Oct 2018 09:05:23.6190
 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Hosted
X-MS-Exchange-CrossTenant-id: 686ea1d3-bc2b-4c6f-a92c-d99c5c301635
X-MS-Exchange-Transport-CrossTenantHeadersStamped: VI1PR04MB0925
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

Hi,

> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@bootlin.com]
> Sent: Tuesday, October 23, 2018 2:31 PM
> To: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com>
> Cc: Cristian.Birsan@microchip.com; Tudor Ambarus
> <tudor.ambarus@microchip.com>; richard@nod.at; Mark Brown
> <broonie@kernel.org>; linux-kernel@vger.kernel.org;
> nicolas.ferre@microchip.com; marek.vasut@gmail.com;
> cyrille.pitchen@microchip.com; linux-mtd@lists.infradead.org; Cyrille Pit=
chen
> <cyrille.pitchen@wedev4u.fr>; computersforpeace@gmail.com;
> dwmw2@infradead.org; linux-arm-kernel@lists.infradead.org
> Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP=
 SPI
> NOR flash memories
>=20
> On Tue, 23 Oct 2018 10:48:27 +0200
> Boris Brezillon <boris.brezillon@bootlin.com> wrote:
>=20
> > On Tue, 23 Oct 2018 08:18:35 +0000
> > Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> wrote:
> >
> > >
> > > I have added the prints in m25p80_read() and in flexspi controller pr=
epare_lut
> and read_rxfifo() func.
> > > In these have added prints for data variable of struct op and data wh=
ich
> being read by the controller from the flash.
> > >
> > > [    2.091467] smpt[0]=3D[addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065, data_mask:00000008]
> > > [    2.099113] m25p80_read, nor[op:00000065 addr_width:00000003,
> dummy:00000008, len:00000001
> > > [    2.107367] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbyte=
s:3,
> bwidth:1]
> > > [    2.114753] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,
> nbytes:1]
> > > [    2.121706] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:=
4,
> nbytes:3, bwidth:1]
> > > [    2.129786] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1=
]
> > > [    2.136132] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465
> 1:24003008      2:0     3:0]
> > > [    2.144223] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > > [    2.151004] smpt_read[1] addr[00000004], data_byte[00000000]
> err:00000000
> > >
> > >
> > > [    2.157782] smpt[2]=3D[addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065, data_mask:00000004]
> > > [    2.165429] m25p80_read, nor[op:00000065 addr_width:00000003,
> dummy:00000008, len:00000001
> > > [    2.173683] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:2, nbyte=
s:3,
> bwidth:1]
> > > [    2.181068] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,
> nbytes:1]
> > > [    2.188021] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:=
2,
> nbytes:3, bwidth:1]
> > > [    2.196101] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1=
]
> > > [    2.202447] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465
> 1:24003008      2:0     3:0]
> > > [    2.210539] nxp_fspi_read_rxfifo, ReadData op.buf[0x02]
> > > [    2.217319] smpt_read[3] addr[00000002], data_byte[00000002]
> err:00000000
> > >
> > >
> > > [    2.224098] smpt[4]=3D[addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065, data_mask:00000002]
> > > [    2.231744] m25p80_read, nor[op:00000065 addr_width:00000003,
> dummy:00000008, len:00000001
> > > [    2.239998] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbyte=
s:3,
> bwidth:1]
> > > [    2.247383] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,
> nbytes:1]
> > > [    2.254336] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:=
4,
> nbytes:3, bwidth:1]
> > > [    2.262416] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1=
]
> > > [    2.268762] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465
> 1:24003008      2:0     3:0]
> > > [    2.276854] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > > [    2.283634] smpt_read[5] addr[00000004], data_byte[00000000]
> err:00000000
> > >
> > >
> > > [    2.290412] spi_nor_get_map_in_use:2915 map_id=3D0 smpt_len:16 i=
=3D:6
> > > [    2.296496] End [addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065] ReturnVal:00000000
> > > [    2.305444] spi_nor_parse_smpt:3065
> > > [    2.308924] m25p80 spi0.0: failed to parse SMPT (err =3D -22)
> > >
> > >
> > > >
> > > > Next thing you can do is read the CR2NV reg (using the RDAR command=
)
> and
> > > > check the RL (Read Latency) and AL (Address Length) values.
> > >
> > > Please let me know how to read CR2NV register.
> >
> > Actually, RDAR is already what you use to read the map_id, and we need
> > to use it to read the register that contains the number of dummy
> > cycles and the number of address bytes to use for RDAR operations.
> > Looks like we have a chicken and egg situation here :-).
> >
> > Let's try something else:
> >
> > 1/ create an u8 array of 16 entries named data_bytes
> >
> > for each loop iteration (the first for loop):
> > 2/ set ->addr_width to 3 and ->read_dummy to 0 3/ call
> > spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes) 4/
> > dump the data_bytes buf 5/ set ->addr_width to 4 6/ call
> > spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes) 7/
> > dump the data_bytes buf
> >
> > If the SPI driver is working correctly, we should be able to figure
> > out the right value for ->addr_width and ->read_dummy.
>=20
> Also, can you add traces in nxp_fspi_read_rxfifo() to print the value ret=
urned by
> f->read(base + FSPI_RFDR + j * 4) (there are 2 of them).

I have added this and printing the data content, all 4 bytes, after each f-=
>read(base + FSPI_RFDR + j * 4);
This I have shown in the logs, only 1 byte i.e. as we are reading only 1 by=
te so I have deleted content of rest 3 bytes when sending the logs in mail.

--
Regards
Yogesh gaur