Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261775AbUACMYo (ORCPT ); Sat, 3 Jan 2004 07:24:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S262015AbUACMYo (ORCPT ); Sat, 3 Jan 2004 07:24:44 -0500 Received: from pop.gmx.de ([213.165.64.20]:17071 "HELO mail.gmx.net") by vger.kernel.org with SMTP id S261775AbUACMXo (ORCPT ); Sat, 3 Jan 2004 07:23:44 -0500 X-Authenticated: #934491 Subject: Oops with 2.6.1_rc1-mm1 From: Benjamin Weber To: Linux Kernel Mailing List Content-Type: multipart/mixed; boundary="=-2X5ioJs6zdx81ub3AV9r" Message-Id: <1073132357.4889.10.camel@athxp.bwlinux.de> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.4.5 Date: Sat, 03 Jan 2004 13:19:17 +0100 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 51853 Lines: 1838 --=-2X5ioJs6zdx81ub3AV9r Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi all I just encountered this oops with 2.6.1_rc1-mm1. It did not lockup the machine though. It continued to boot and start x, though in a very small resolution. Maybe its related to the ati-driver for my Radeon 9600 card? I am not sure what might have triggered this oops. Any hints where to start looking? Also attached to this email is the full dmesg, .config, and ksymoops output. ------------------ Freeing unused kernel memory: 180k freed Adding 497972k swap on /dev/hda6. Priority:-1 extents:1 Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027bbae *pde = 00000000 Oops: 0000 [#1] PREEMPT CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 EIP is at vt_ioctl+0x1e/0x1f00 eax: 00000000 ebx: 00005401 ecx: 00000000 edx: bfff7188 esi: fffffff8 edi: c1757000 ebp: df5ddbc0 esp: df0b7eb8 ds: 007b es: 007b ss: 0068 Process mv (pid: 2707, threadinfo=df0b6000 task=df0dcd00) Stack: 00000150 00000000 00000000 dfad1118 00000001 df09c400 400fc850 df332700 00000000 c0148bfe df332700 df73aac0 400fc850 00000000 df34a3f0 df09c400 00000000 df332700 df332720 df0dcd00 400fc850 c011be72 df332700 df73aac0 Call Trace: [] handle_mm_fault+0xde/0x180 [] do_page_fault+0x312/0x512 [] do_brk+0x1ea/0x230 [] tty_ioctl+0x3b1/0x4d0 [] sys_ioctl+0xf3/0x280 [] do_page_fault+0x0/0x512 [] syscall_call+0x7/0xb Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 55 57 56 53 81 ec a4 00 00 00 8b bc 24 b8 00 00 00 8b 9c 24 c0 00 00 00 8b 87 64 09 00 00 <8b> 30 8b 04 b5 a0 fe 54 c0 89 34 24 89 44 24 44 e8 7d 6c 00 00 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027bbae *pde = 00000000 Oops: 0000 [#2] PREEMPT CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 EIP is at vt_ioctl+0x1e/0x1f00 eax: 00000000 ebx: 00005401 ecx: 00000000 edx: bffff260 esi: fffffff8 edi: c1757000 ebp: df5ddbc0 esp: df167eb8 ds: 007b es: 007b ss: 0068 Process rc (pid: 2674, threadinfo=df166000 task=df169940) Stack: c0147e88 c14e37c0 c010ad90 bffff858 bffff8b0 df4d9400 40153f5c df4dadc0 00000001 c0148c69 df4dadc0 df5e4dc0 df167f00 df167f60 c0160c58 bffff320 df167f00 00000060 0000000a 00000000 00000000 00000013 00002180 00000001 Call Trace: [] do_wp_page+0x298/0x320 [] setup_frame+0x110/0x1f0 [] handle_mm_fault+0x149/0x180 [] cp_new_stat64+0x118/0x140 [] tty_ioctl+0x3b1/0x4d0 [] sys_ioctl+0xf3/0x280 [] syscall_call+0x7/0xb Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 55 57 56 53 81 ec a4 00 00 00 8b bc 24 b8 00 00 00 8b 9c 24 c0 00 00 00 8b 87 64 09 00 00 <8b> 30 8b 04 b5 a0 fe 54 c0 89 34 24 89 44 24 44 e8 7d 6c 00 00 <7>eth0: no IPv6 routers present -------- Regards Benjamin Weber --=-2X5ioJs6zdx81ub3AV9r Content-Disposition: attachment; filename=dmesg.oops Content-Type: text/plain; name=dmesg.oops; charset=ISO-8859-15 Content-Transfer-Encoding: 8bit 0000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2700+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2157.0708 MHz. ..... host bus clock speed is 331.0955 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031203 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) ACPI: PCI Interrupt Link [ALKB] (IRQs 21) ACPI: PCI Interrupt Link [ALKC] (IRQs 22) ACPI: PCI Interrupt Link [ALKD] (IRQs 23) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) 00:00:08[A] -> 2-16 -> IRQ 16 IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) 00:00:08[B] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) 00:00:08[C] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) 00:00:08[D] -> 2-19 -> IRQ 19 Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed _CRS returns NULL! Using IRQ 21 fordevice (PCI Interrupt Link [ALKB]). ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21 Mode:1 Active:1) 00:00:10[A] -> 2-21 -> IRQ 21 Pin 2-21 already programmed Pin 2-21 already programmed Pin 2-21 already programmed _CRS returns NULL! Using IRQ 20 fordevice (PCI Interrupt Link [ALKA]). ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1) 00:00:11[A] -> 2-20 -> IRQ 20 Pin 2-21 already programmed _CRS returns NULL! Using IRQ 22 fordevice (PCI Interrupt Link [ALKC]). ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1) 00:00:11[C] -> 2-22 -> IRQ 22 _CRS returns NULL! Using IRQ 23 fordevice (PCI Interrupt Link [ALKD]). ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1) 00:00:11[D] -> 2-23 -> IRQ 23 Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-23 already programmed Pin 2-23 already programmed Pin 2-23 already programmed Pin 2-23 already programmed number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 A9 11 001 01 1 1 0 1 0 1 1 B1 12 001 01 1 1 0 1 0 1 1 B9 13 001 01 1 1 0 1 0 1 1 C1 14 001 01 1 1 0 1 0 1 1 D1 15 001 01 1 1 0 1 0 1 1 C9 16 001 01 1 1 0 1 0 1 1 D9 17 001 01 1 1 0 1 0 1 1 E1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9-> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' vesafb: framebuffer at 0xc0000000, mapped to 0xe080b000, size 16384k vesafb: mode is 1024x768x24, linelength=3072, pages=55 vesafb: protected mode interface info at c000:580b vesafb: scrolling: redraw vesafb: directcolor: size=0:8:8:8, shift=0:16:8:0 fb0: VESA VGA frame buffer device Machine check exception polling timer started. ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.5 [Flags: R/O]. udf: registering filesystem Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Fan [FAN] (on) ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (40 C) Console: switching to colour frame buffer device 128x48 pty: 256 Unix98 ptys configured request_module: failed /sbin/modprobe -- parport_lowlevel. error = -16 lp: driver loaded but no devices found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xe0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected lp0: using parport0 (polling). Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:D0:B7:F0:8C:B8, IRQ 18. Board assembly a04475-005, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD800BB-00CAA1, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: CD-W516EB, ATAPI CD/DVD-ROM drive hdd: DV-516E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 > p3 p4 hdc: ATAPI 40X CD-ROM CD-R/RW drive, 1456kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 cdrom: : unknown mrw mode page hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Console: switching to colour frame buffer device 128x48 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: irq 21, pci mem e1843000 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: irq 21, io base 0000dc00 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 21, io base 0000e000 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 21, io base 0000e400 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected drivers/usb/core/usb.c: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... drivers/usb/core/usb.c: registered new driver usb-storage USB Mass Storage support registered. drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003 UTC). request_module: failed /sbin/modprobe -- snd-card-0. error = -16 ALSA device list: #0: Sound Blaster Live! (rev.8) at 0xd400, irq 19 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 10 IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 ACPI: (supports S0 S1 S4 S5) found reiserfs format "3.6" with standard journal hub 2-0:1.0: new USB device on port 1, assigned address 2 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Optical] on usb-0000:00:10.0-1 Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda4) for (hda4) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 180k freed Adding 497972k swap on /dev/hda6. Priority:-1 extents:1 Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027bbae *pde = 00000000 Oops: 0000 [#1] PREEMPT CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 EIP is at vt_ioctl+0x1e/0x1f00 eax: 00000000 ebx: 00005401 ecx: 00000000 edx: bfff7188 esi: fffffff8 edi: c1757000 ebp: df5ddbc0 esp: df0b7eb8 ds: 007b es: 007b ss: 0068 Process mv (pid: 2707, threadinfo=df0b6000 task=df0dcd00) Stack: 00000150 00000000 00000000 dfad1118 00000001 df09c400 400fc850 df332700 00000000 c0148bfe df332700 df73aac0 400fc850 00000000 df34a3f0 df09c400 00000000 df332700 df332720 df0dcd00 400fc850 c011be72 df332700 df73aac0 Call Trace: [] handle_mm_fault+0xde/0x180 [] do_page_fault+0x312/0x512 [] do_brk+0x1ea/0x230 [] tty_ioctl+0x3b1/0x4d0 [] sys_ioctl+0xf3/0x280 [] do_page_fault+0x0/0x512 [] syscall_call+0x7/0xb Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 55 57 56 53 81 ec a4 00 00 00 8b bc 24 b8 00 00 00 8b 9c 24 c0 00 00 00 8b 87 64 09 00 00 <8b> 30 8b 04 b5 a0 fe 54 c0 89 34 24 89 44 24 44 e8 7d 6c 00 00 <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027bbae *pde = 00000000 Oops: 0000 [#2] PREEMPT CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 EIP is at vt_ioctl+0x1e/0x1f00 eax: 00000000 ebx: 00005401 ecx: 00000000 edx: bffff260 esi: fffffff8 edi: c1757000 ebp: df5ddbc0 esp: df167eb8 ds: 007b es: 007b ss: 0068 Process rc (pid: 2674, threadinfo=df166000 task=df169940) Stack: c0147e88 c14e37c0 c010ad90 bffff858 bffff8b0 df4d9400 40153f5c df4dadc0 00000001 c0148c69 df4dadc0 df5e4dc0 df167f00 df167f60 c0160c58 bffff320 df167f00 00000060 0000000a 00000000 00000000 00000013 00002180 00000001 Call Trace: [] do_wp_page+0x298/0x320 [] setup_frame+0x110/0x1f0 [] handle_mm_fault+0x149/0x180 [] cp_new_stat64+0x118/0x140 [] tty_ioctl+0x3b1/0x4d0 [] sys_ioctl+0xf3/0x280 [] syscall_call+0x7/0xb Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 55 57 56 53 81 ec a4 00 00 00 8b bc 24 b8 00 00 00 8b 9c 24 c0 00 00 00 8b 87 64 09 00 00 <8b> 30 8b 04 b5 a0 fe 54 c0 89 34 24 89 44 24 44 e8 7d 6c 00 00 <7>eth0: no IPv6 routers present request_module: failed /sbin/modprobe -- char-major-226-0. error = 256 mtrr: 0xc0000000,0x8000000 overlaps existing 0xc0000000,0x1000000 atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). --=-2X5ioJs6zdx81ub3AV9r Content-Disposition: attachment; filename=ksymoops.log Content-Type: text/plain; name=ksymoops.log; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit ksymoops 2.4.9 on i686 2.6.0. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.6.0/ (default) -m /usr/src/linux/System.map (default) Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options. Error (regular_file): read_ksyms stat /proc/ksyms failed No modules in ksyms, skipping objects No ksyms, skipping lsmod 0000000 Machine check exception polling timer started. Unable to handle kernel NULL pointer dereference at virtual address 00000000 c027bbae *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted VLI Using defaults from ksymoops -t elf32-i386 -a i386 EFLAGS: 00010286 eax: 00000000 ebx: 00005401 ecx: 00000000 edx: bfff7188 esi: fffffff8 edi: c1757000 ebp: df5ddbc0 esp: df0b7eb8 ds: 007b es: 007b ss: 0068 Stack: 00000150 00000000 00000000 dfad1118 00000001 df09c400 400fc850 df332700 00000000 c0148bfe df332700 df73aac0 400fc850 00000000 df34a3f0 df09c400 00000000 df332700 df332720 df0dcd00 400fc850 c011be72 df332700 df73aac0 Call Trace: [] handle_mm_fault+0xde/0x180 [] do_page_fault+0x312/0x512 [] do_brk+0x1ea/0x230 [] tty_ioctl+0x3b1/0x4d0 [] sys_ioctl+0xf3/0x280 [] do_page_fault+0x0/0x512 [] syscall_call+0x7/0xb Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 55 57 56 53 81 ec a4 00 00 00 8b bc 24 b8 00 00 00 8b 9c 24 c0 00 00 00 8b 87 64 09 00 00 <8b> 30 8b 04 b5 a0 fe 54 c0 89 34 24 89 44 24 44 e8 7d 6c 00 00 >>EIP; c027bbae <===== >>esi; fffffff8 <__kernel_rt_sigreturn+2bb8/????> >>edi; c1757000 <_end+11f919c/3fa9f19c> >>ebp; df5ddbc0 <_end+1f07fd5c/3fa9f19c> >>esp; df0b7eb8 <_end+1eb5a054/3fa9f19c> Trace; c0148bfe Trace; c011be72 Trace; c014b11a Trace; c0276b31 Trace; c0168f93 Trace; c011bb60 Trace; c03fa4fb This architecture has variable length instructions, decoding before eip is unreliable, take these instructions with a pinch of salt. Code; c027bb83 <.text.lock.misc+70/7d> 00000000 <_EIP>: Code; c027bb83 <.text.lock.misc+70/7d> 0: 90 nop Code; c027bb84 <.text.lock.misc+71/7d> 1: 90 nop Code; c027bb85 <.text.lock.misc+72/7d> 2: 90 nop Code; c027bb86 <.text.lock.misc+73/7d> 3: 90 nop Code; c027bb87 <.text.lock.misc+74/7d> 4: 90 nop Code; c027bb88 <.text.lock.misc+75/7d> 5: 90 nop Code; c027bb89 <.text.lock.misc+76/7d> 6: 90 nop Code; c027bb8a <.text.lock.misc+77/7d> 7: 90 nop Code; c027bb8b <.text.lock.misc+78/7d> 8: 90 nop Code; c027bb8c <.text.lock.misc+79/7d> 9: 90 nop Code; c027bb8d <.text.lock.misc+7a/7d> a: 90 nop Code; c027bb8e <.text.lock.misc+7b/7d> b: 90 nop Code; c027bb8f <.text.lock.misc+7c/7d> c: 90 nop Code; c027bb90 d: 55 push %ebp Code; c027bb91 e: 57 push %edi Code; c027bb92 f: 56 push %esi Code; c027bb93 10: 53 push %ebx Code; c027bb94 11: 81 ec a4 00 00 00 sub $0xa4,%esp Code; c027bb9a 17: 8b bc 24 b8 00 00 00 mov 0xb8(%esp,1),%edi Code; c027bba1 1e: 8b 9c 24 c0 00 00 00 mov 0xc0(%esp,1),%ebx Code; c027bba8 25: 8b 87 64 09 00 00 mov 0x964(%edi),%eax This decode from eip onwards should be reliable Code; c027bbae 00000000 <_EIP>: Code; c027bbae <===== 0: 8b 30 mov (%eax),%esi <===== Code; c027bbb0 2: 8b 04 b5 a0 fe 54 c0 mov 0xc054fea0(,%esi,4),%eax Code; c027bbb7 9: 89 34 24 mov %esi,(%esp,1) Code; c027bbba c: 89 44 24 44 mov %eax,0x44(%esp,1) Code; c027bbbe 10: e8 7d 6c 00 00 call 6c92 <_EIP+0x6c92> <1>Unable to handle kernel NULL pointer dereference at virtual address 00000000 c027bbae *pde = 00000000 Oops: 0000 [#2] CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010286 eax: 00000000 ebx: 00005401 ecx: 00000000 edx: bffff260 esi: fffffff8 edi: c1757000 ebp: df5ddbc0 esp: df167eb8 ds: 007b es: 007b ss: 0068 Stack: c0147e88 c14e37c0 c010ad90 bffff858 bffff8b0 df4d9400 40153f5c df4dadc0 00000001 c0148c69 df4dadc0 df5e4dc0 df167f00 df167f60 c0160c58 bffff320 df167f00 00000060 0000000a 00000000 00000000 00000013 00002180 00000001 Call Trace: [] do_wp_page+0x298/0x320 [] setup_frame+0x110/0x1f0 [] handle_mm_fault+0x149/0x180 [] cp_new_stat64+0x118/0x140 [] tty_ioctl+0x3b1/0x4d0 [] sys_ioctl+0xf3/0x280 [] syscall_call+0x7/0xb Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 55 57 56 53 81 ec a4 00 00 00 8b bc 24 b8 00 00 00 8b 9c 24 c0 00 00 00 8b 87 64 09 00 00 <8b> 30 8b 04 b5 a0 fe 54 c0 89 34 24 89 44 24 44 e8 7d 6c 00 00 >>EIP; c027bbae <===== >>esi; fffffff8 <__kernel_rt_sigreturn+2bb8/????> >>edi; c1757000 <_end+11f919c/3fa9f19c> >>ebp; df5ddbc0 <_end+1f07fd5c/3fa9f19c> >>esp; df167eb8 <_end+1ec0a054/3fa9f19c> Trace; c0147e88 Trace; c010ad90 Trace; c0148c69 Trace; c0160c58 Trace; c0276b31 Trace; c0168f93 Trace; c03fa4fb This architecture has variable length instructions, decoding before eip is unreliable, take these instructions with a pinch of salt. Code; c027bb83 <.text.lock.misc+70/7d> 00000000 <_EIP>: Code; c027bb83 <.text.lock.misc+70/7d> 0: 90 nop Code; c027bb84 <.text.lock.misc+71/7d> 1: 90 nop Code; c027bb85 <.text.lock.misc+72/7d> 2: 90 nop Code; c027bb86 <.text.lock.misc+73/7d> 3: 90 nop Code; c027bb87 <.text.lock.misc+74/7d> 4: 90 nop Code; c027bb88 <.text.lock.misc+75/7d> 5: 90 nop Code; c027bb89 <.text.lock.misc+76/7d> 6: 90 nop Code; c027bb8a <.text.lock.misc+77/7d> 7: 90 nop Code; c027bb8b <.text.lock.misc+78/7d> 8: 90 nop Code; c027bb8c <.text.lock.misc+79/7d> 9: 90 nop Code; c027bb8d <.text.lock.misc+7a/7d> a: 90 nop Code; c027bb8e <.text.lock.misc+7b/7d> b: 90 nop Code; c027bb8f <.text.lock.misc+7c/7d> c: 90 nop Code; c027bb90 d: 55 push %ebp Code; c027bb91 e: 57 push %edi Code; c027bb92 f: 56 push %esi Code; c027bb93 10: 53 push %ebx Code; c027bb94 11: 81 ec a4 00 00 00 sub $0xa4,%esp Code; c027bb9a 17: 8b bc 24 b8 00 00 00 mov 0xb8(%esp,1),%edi Code; c027bba1 1e: 8b 9c 24 c0 00 00 00 mov 0xc0(%esp,1),%ebx Code; c027bba8 25: 8b 87 64 09 00 00 mov 0x964(%edi),%eax This decode from eip onwards should be reliable Code; c027bbae 00000000 <_EIP>: Code; c027bbae <===== 0: 8b 30 mov (%eax),%esi <===== Code; c027bbb0 2: 8b 04 b5 a0 fe 54 c0 mov 0xc054fea0(,%esi,4),%eax Code; c027bbb7 9: 89 34 24 mov %esi,(%esp,1) Code; c027bbba c: 89 44 24 44 mov %eax,0x44(%esp,1) Code; c027bbbe 10: e8 7d 6c 00 00 call 6c92 <_EIP+0x6c92> 1 warning and 1 error issued. Results may not be reliable. --=-2X5ioJs6zdx81ub3AV9r Content-Disposition: attachment; filename=.config Content-Type: text/plain; name=.config; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # CONFIG_CLEAN_COMPILE is not set # CONFIG_STANDALONE is not set CONFIG_BROKEN=y CONFIG_BROKEN_ON_SMP=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_EMBEDDED is not set CONFIG_KALLSYMS=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_X86_ES7000 is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set CONFIG_MK7=y # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_USE_3DNOW=y # CONFIG_X86_4G is not set # CONFIG_X86_SWITCH_PAGETABLES is not set # CONFIG_X86_4G_VM_LAYOUT is not set # CONFIG_X86_UACCESS_INDIRECT is not set # CONFIG_X86_HIGH_ENTRY is not set # CONFIG_HPET_TIMER is not set # CONFIG_HPET_EMULATE_RTC is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y CONFIG_X86_UP_APIC=y CONFIG_X86_UP_IOAPIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_TSC=y CONFIG_X86_MCE=y CONFIG_X86_MCE_NONFATAL=y # CONFIG_X86_MCE_P4THERMAL is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y # CONFIG_EFI is not set CONFIG_HAVE_DEC_LOCK=y # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_PM_DISK is not set # # ACPI (Advanced Configuration and Power Interface) Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_SLEEP_PROC_FS=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_ASUS is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_ACPI_RELAXED_AML is not set CONFIG_X86_PM_TIMER=y # # APM (Advanced Power Management) BIOS Support # # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_USE_VECTOR is not set CONFIG_PCI_LEGACY_PROC=y CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_MISC=y # # Device Drivers # # # Generic Driver Options # # CONFIG_FW_LOADER is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_CML1=y # CONFIG_PARPORT_SERIAL is not set # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_OTHER is not set # CONFIG_PARPORT_1284 is not set # # Plug and Play support # CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # # CONFIG_ISAPNP is not set # CONFIG_PNPBIOS is not set # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_LBD=y # # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_TASKFILE_IO=y # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_IDEPNP is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set CONFIG_BLK_DEV_VIA82CXXX=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set CONFIG_IDEDMA_AUTO=y # CONFIG_DMA_NONPCI is not set # CONFIG_BLK_DEV_HD is not set # # SCSI device support # CONFIG_SCSI=y CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_MAX_SD_DISKS=256 # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_MULTI_LUN is not set CONFIG_SCSI_REPORT_LUNS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_SATA is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_QLOGIC_ISP is not set # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set # CONFIG_NETLINK_DEV is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_IPV6=y # CONFIG_IPV6_PRIVACY is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_NETFILTER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_DGRS is not set CONFIG_EEPRO100=y # CONFIG_EEPRO100_PIO is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # Bluetooth support # # CONFIG_BT is not set # CONFIG_KGDBOE is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_RX is not set # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_CONSOLE is not set # CONFIG_SERIAL_8250_ACPI is not set CONFIG_SERIAL_8250_NR_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=y # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set # CONFIG_TIPAR is not set # # I2C support # # CONFIG_I2C is not set # # I2C Algorithms # # # I2C Hardware Bus support # # # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD64 is not set # CONFIG_AGP_INTEL is not set # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set CONFIG_AGP_VIA=y # CONFIG_DRM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # Graphics support # CONFIG_FB=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_PCI_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # # Logo configuration # CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y CONFIG_SND_SEQUENCER=y # CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set CONFIG_SND_EMU10K1=y # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VX222 is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # # USB Serial Converter support # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=y CONFIG_UDF_FS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y # CONFIG_NTFS_DEBUG is not set # CONFIG_NTFS_RW is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_SYSFS=y CONFIG_DEVFS_FS=y CONFIG_DEVFS_MOUNT=y # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_DEVPTS_FS_XATTR is not set CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set # CONFIG_ROOT_NFS is not set CONFIG_LOCKD=y CONFIG_EXPORTFS=y CONFIG_SUNRPC=y # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="iso8859-15" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-15" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_FRAME_POINTER is not set CONFIG_X86_EXTRA_IRQS=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # CONFIG_CRYPTO=y # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_TEST is not set # # Library routines # # CONFIG_CRC32 is not set CONFIG_ZLIB_INFLATE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_PC=y --=-2X5ioJs6zdx81ub3AV9r-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/