Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Douglas Anderson <dianders@chromium.org>
To:     Sean Paul <seanpaul@chromium.org>,
        Thierry Reding <thierry.reding@gmail.com>,
        Sandeep Panda <spanda@codeaurora.org>
Cc:     linux-arm-msm@vger.kernel.org,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        jsanka@codeaurora.org, ryandcase@chromium.org,
        Douglas Anderson <dianders@chromium.org>,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        dri-devel@lists.freedesktop.org, Rob Herring <robh+dt@kernel.org>,
        David Airlie <airlied@linux.ie>,
        Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v2 5/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
Date:   Thu, 25 Oct 2018 15:21:33 -0700
Message-Id: <20181025222134.174583-5-dianders@chromium.org>
In-Reply-To: <20181025222134.174583-1-dianders@chromium.org>
References: <20181025222134.174583-1-dianders@chromium.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

As far as I can tell the bindings that were added in commit
9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel
bindings") weren't actually for Innolux TV123WAM but were actually for
Innolux P120ZDG-BF1.

As far as I can tell the Innolux TV123WAM isn't a real panel and but
it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1.
Let's unmosh.

Here's my evidence:

* Searching for TV123WAM on the Internet turns up a TI panel.  While
  it's possible that an Innolux panel has the same model number as the
  TI Panel, it seems a little doubtful.  Looking up the datasheet from
  the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm.

* As far as I know, the patch adding the Innolux Panel was supposed to
  be for the board that's sitting in front of me as I type this
  (support for that board is not yet upstream).  On the back of that
  panel I see Innolux P120ZDZ-EZ1 rev B1.

* Someone pointed me at a datasheet that's supposed to be for the
  panel in front of me (sorry, I can't share the datasheet).  That
  datasheet has the string "p120zdg-bf1"

* If I search for "P120ZDG-BF1" on the Internet I get hits for panels
  that are 2160x1440.  They don't have datasheets, but the fact that
  the resolution matches is a good sign.

While we doing the rename, also mention that no-hpd can be used with
this panel.  See the previous patch in this series ("drm/panel:
simple: Add "no-hpd" delay for Innolux TV123WAM").

Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Sandeep Panda <spanda@codeaurora.org>
---

Changes in v2: None

 .../{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt}     | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)
 rename Documentation/devicetree/bindings/display/panel/{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} (70%)

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
similarity index 70%
rename from Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
rename to Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
index a9b35265fa13..513f03466aba 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
@@ -1,20 +1,22 @@
-Innolux TV123WAM 12.3 inch eDP 2K display panel
+Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel
 
 This binding is compatible with the simple-panel binding, which is specified
 in simple-panel.txt in this directory.
 
 Required properties:
-- compatible: should be "innolux,tv123wam"
+- compatible: should be "innolux,p120zdg-bf1"
 - power-supply: regulator to provide the supply voltage
 
 Optional properties:
 - enable-gpios: GPIO pin to enable or disable the panel
 - backlight: phandle of the backlight device attached to the panel
+- no-hpd: If HPD isn't hooked up; add this property.
 
 Example:
 	panel_edp: panel-edp {
-		compatible = "innolux,tv123wam";
+		compatible = "innolux,p120zdg-bf1";
 		enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
 		power-supply = <&pm8916_l2>;
 		backlight = <&backlight>;
+		no-hpd;
 	};
-- 
2.19.1.568.g152ad8e336-goog