Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <CGME20181017155403epcas2p1ed9777e96c6b2c77c2c5b67466be9843@epcas2p1.samsung.com>
 <1539791563-5959-1-git-send-email-b.zolnierkie@samsung.com>
 <1539791563-5959-9-git-send-email-b.zolnierkie@samsung.com> <CAHLCerNsdhG1OjiRiy5s4uSRGB6dUCVe7mvknCqWqMeQzxCb7Q@mail.gmail.com>
In-Reply-To: <CAHLCerNsdhG1OjiRiy5s4uSRGB6dUCVe7mvknCqWqMeQzxCb7Q@mail.gmail.com>
From:   Amit Kucheria <amit.kucheria@linaro.org>
Date:   Fri, 26 Oct 2018 18:09:58 +0530
Message-ID: <CAHLCerOqgLep=sPvODyEY8sUr=xxkVU+BkWU5ipTX6w_j6dWtQ@mail.gmail.com>
Subject: Re: [PATCH v2 08/17] thermal: qcom: tsens: enable+check sensor after
 its setup is finished
To:     Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc:     Zhang Rui <rui.zhang@intel.com>,
        Eduardo Valentin <edubezval@gmail.com>,
        Eric Anholt <eric@anholt.net>,
        Stefan Wahren <stefan.wahren@i2se.com>,
        Markus Mayer <mmayer@broadcom.com>,
        bcm-kernel-feedback-list@broadcom.com,
        Heiko Stuebner <heiko@sntech.de>,
        Thierry Reding <thierry.reding@gmail.com>,
        Jonathan Hunter <jonathanh@nvidia.com>,
        Keerthy <j-keerthy@ti.com>,
        Masahiro Yamada <yamada.masahiro@socionext.com>,
        Jun Nie <jun.nie@linaro.org>,
        Baoyou Xie <baoyou.xie@linaro.org>,
        Shawn Guo <shawnguo@kernel.org>,
        Linux PM list <linux-pm@vger.kernel.org>,
        LKML <linux-kernel@vger.kernel.org>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Fri, Oct 26, 2018 at 5:41 PM Amit Kucheria <amit.kucheria@linaro.org> wrote:
>
> On Wed, Oct 17, 2018 at 9:24 PM Bartlomiej Zolnierkiewicz
> <b.zolnierkie@samsung.com> wrote:
> >
> > Enable+check sensor after setting tmdev->sensor[i].tzd and calling
> > chipset specific enable operation.
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
> > ---
> >  drivers/thermal/qcom/tsens.c | 6 +++---
> >  1 file changed, 3 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
> > index dbd2556..01bff96 100644
> > --- a/drivers/thermal/qcom/tsens.c
> > +++ b/drivers/thermal/qcom/tsens.c
> > @@ -105,13 +105,13 @@ static int tsens_register(struct tsens_device *tmdev)
> >                 if (IS_ERR(tzd))
> >                         continue;
> >
> > -               thermal_zone_set_mode(tzd, THERMAL_DEVICE_ENABLED);
> > -               thermal_zone_device_check(tzd);
> > -
>
> I don't quite understand why you're making this move explicitly in a
> separate patch for each of the drivers? You added it here in patch 4
> in the first place, why not add it in the correct place there itself?

I think I understand now. You wanted to separate patches causing
functional changes from ones that didn't.

IMHO, it makes the series a bit hard to read but I have no better
suggestion than to squash everything (patches 3-16), but that will
make it harder to collect Acks.

> >                 tmdev->sensor[i].tzd = tzd;
> >
> >                 if (tmdev->ops->enable)
> >                         tmdev->ops->enable(tmdev, i);
> > +
> > +               thermal_zone_set_mode(tzd, THERMAL_DEVICE_ENABLED);
> > +               thermal_zone_device_check(tzd);
> >
> >         }
> >         return 0;
> >  }
> > --
> > 1.9.1
> >