Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     robh@kernel.org, heiko@sntech.de, ezequiel@collabora.com,
        xuwei5@hisilicon.com, michal.simek@xilinx.com, pavel@ucw.cz,
        andy.gross@linaro.org
Cc:     linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-rockchip@lists.infradead.org, linux-arm-msm@vger.kernel.org,
        linux-soc@vger.kernel.org, daniel.thompson@linaro.org,
        amit.kucheria@linaro.org, linus.walleij@linaro.org,
        koen.kooi@linaro.org, nicolas.dechesne@linaro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v2 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels
Date:   Mon, 29 Oct 2018 14:30:06 +0530
Message-Id: <20181029090006.4353-8-manivannan.sadhasivam@linaro.org>
In-Reply-To: <20181029090006.4353-1-manivannan.sadhasivam@linaro.org>
References: <20181029090006.4353-1-manivannan.sadhasivam@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

For all 96Boards, the following standard is used for onboard LEDs.

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
one of the 96Boards CE platform.
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 46feedf7c989..35f95154316b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -300,28 +300,28 @@
 			compatible = "gpio-leds";
 
 			led@1 {
-				label = "apq8016-sbc:green:user1";
+				label = "green:user1";
 				gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "heartbeat";
 				default-state = "off";
 			};
 
 			led@2 {
-				label = "apq8016-sbc:green:user2";
+				label = "green:user2";
 				gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
 
 			led@3 {
-				label = "apq8016-sbc:green:user3";
+				label = "green:user3";
 				gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "mmc1";
 				default-state = "off";
 			};
 
 			led@4 {
-				label = "apq8016-sbc:green:user4";
+				label = "green:user4";
 				gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "none";
 				panic-indicator;
@@ -329,14 +329,14 @@
 			};
 
 			led@5 {
-				label = "apq8016-sbc:yellow:wlan";
+				label = "yellow:wlan";
 				gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "phy0tx";
 				default-state = "off";
 			};
 
 			led@6 {
-				label = "apq8016-sbc:blue:bt";
+				label = "blue:bt";
 				gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
 				linux,default-trigger = "bluetooth-power";
 				default-state = "off";
-- 
2.17.1