Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
MIME-Version: 1.0
References: <e7c061535f2dcca54d6498405fdd5ed7098b19f9.1540189330.git.baolin.wang@linaro.org>
 <6a4c15368e0bf34f8e6aad4d788bc899cfb9d61e.1540189330.git.baolin.wang@linaro.org>
In-Reply-To: <6a4c15368e0bf34f8e6aad4d788bc899cfb9d61e.1540189330.git.baolin.wang@linaro.org>
From:   Linus Walleij <linus.walleij@linaro.org>
Date:   Wed, 31 Oct 2018 09:56:24 +0100
Message-ID: <CACRpkdaDB2f5FTY-sk6Ak49GMtqFzV_5Jkway49zSLA6XJkq0A@mail.gmail.com>
Subject: Re: [PATCH v6 6/6] power: supply: Add Spreadtrum SC27XX fuel gauge
 unit driver
To:     Baolin Wang <baolin.wang@linaro.org>
Cc:     Sebastian Reichel <sre@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Linux PM list <linux-pm@vger.kernel.org>,
        "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
        <devicetree@vger.kernel.org>,
        "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
        yuanjiang.yu@unisoc.com, Mark Brown <broonie@kernel.org>,
        Craig Tatlor <ctatlor97@gmail.com>
Content-Type: text/plain; charset="UTF-8"
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

On Mon, Oct 22, 2018 at 9:44 AM Baolin Wang <baolin.wang@linaro.org> wrote:

> This patch adds the Spreadtrum SC27XX serial PMICs fuel gauge support,
> which is used to calculate the battery capacity.
>
> Original-by: Yuanjiang Yu <yuanjiang.yu@unisoc.com>
> Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Changes from v5:
>  - Save the OCV values in micro volts for OCV capacity table.
>  - Use devm_kmemdup() instead of devm_kzalloc() in sc27xx_fgu_hw_init()

Hi Baolin, you can keep my ACK, just adding some nitpicking:

> +struct sc27xx_fgu_data {
> +       struct regmap *regmap;
> +       struct device *dev;
> +       struct power_supply *battery;
> +       u32 base;
> +       struct mutex lock;
> +       struct gpio_desc *gpiod;
> +       struct iio_channel *channel;
> +       bool bat_present;
> +       int internal_resist;
> +       int total_cap;
> +       int init_cap;
> +       int init_clbcnt;
> +       int max_volt;
> +       int table_len;

Can  the above really be negative or should these int:s really
be unsigned int?

> +static int sc27xx_fgu_adc_to_current(int adc)
> +{
> +       return (adc * 1000) / SC27XX_FGU_1000MA_ADC;
> +}
> +
> +static int sc27xx_fgu_adc_to_voltage(int adc)
> +{
> +       return (adc * 1000) / SC27XX_FGU_1000MV_ADC;
> +}

Would you maybe use
DIV_ROUND_CLOSEST(adc*1000, SC27XX_FGU_1000MV_ADC)
on these?

Overall this is a very fine driver and really pretty compared to some
other stuff we have in drivers/power.

Yours,
Linus Walleij