Message-ID: <1471.208.180.249.106.1073395438.squirrel@mail.clanhk.org>
In-Reply-To: <20040106135634.A5825@beton.cybernet.src>
References: <20040106135634.A5825@beton.cybernet.src>
Date: Tue, 6 Jan 2004 07:23:58 -0600 (CST)
Subject: Re: won't work: 2.6.0 && SiI 3112 SATA
From: "J. Ryan Earl" <heretic@clanhk.org>
To: Karel =?iso-8859-1?Q?Kulhav=FD?= <clock@twibright.com>
Cc: linux-kernel@vger.kernel.org
User-Agent: SquirrelMail/1.4.2
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
Importance: Normal
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 904
Lines: 23

> Hello
>
> I try to make Adaptec SATA RAID AAR-1210SA (in fact, SiI 3112 ACT 144
> chip)
> work under 2.6.0
>
> When booting, get "hde: lost interrupt" and DMA errors. Tried to switch
> on/off local and I/O APIC (singleproc board) and the errors stay the same.
>
> Are these errors experienced on all SiI3112 boards? Are they experienced
> also in 2.4 kernel? Shall I try some "newer" kernel than 2.6.0?

Try the -mm sources for 2.6, or grab the files @
http://files.clanhk.org/siimage/ and put them under drivers/ide/pci/ and
recompile.  Please report your results.  I had the same problem, looked
into it, and changed something that fixed it for me.

-ryan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/