Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Neil Armstrong <narmstrong@baylibre.com>
To:     khilman@baylibre.com
Cc:     Neil Armstrong <narmstrong@baylibre.com>,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/4] arm64: dts: meson-gxl-libretech-cc: fix GPIO lines names
Date:   Wed,  7 Nov 2018 11:45:47 +0100
Message-Id: <1541587550-17842-2-git-send-email-narmstrong@baylibre.com>
In-Reply-To: <1541587550-17842-1-git-send-email-narmstrong@baylibre.com>
References: <1541587550-17842-1-git-send-email-narmstrong@baylibre.com>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

The gpio line names were set in the pinctrl node instead of the gpio node,
at the time it was merged, it worked, but was obviously wrong.
This patch moves the properties to the gpio nodes.

Fixes: 47884c5c746e ("ARM64: dts: meson-gxl-libretech-cc: Add GPIO lines names")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
index 90a56af..b4dfb9a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@@ -163,7 +163,7 @@
 	};
 };
 
-&pinctrl_aobus {
+&gpio_ao {
 	gpio-line-names = "UART TX",
 			  "UART RX",
 			  "Blue LED",
@@ -178,7 +178,7 @@
 			  "7J1 Header Pin15";
 };
 
-&pinctrl_periphs {
+&gpio {
 	gpio-line-names = /* Bank GPIOZ */
 			  "", "", "", "", "", "", "",
 			  "", "", "", "", "", "", "",
-- 
2.7.4