Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
Subject: Re: [V3, 3/4] Documentation: dt-bindings: media: Document bindings
 for DW MIPI CSI-2 Host
To:     Rob Herring <robh@kernel.org>,
        Luis Oliveira <luis.oliveira@synopsys.com>
CC:     <linux-media@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <joao.pinto@synopsys.com>, <festevam@gmail.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Hans Verkuil <hans.verkuil@cisco.com>,
        Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
        Arnd Bergmann <arnd@arndb.de>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Philipp Zabel <p.zabel@pengutronix.de>,
        "Keiichi Watanabe" <keiichiw@chromium.org>,
        Kate Stewart <kstewart@linuxfoundation.org>,
        Todor Tomov <todor.tomov@linaro.org>,
        <devicetree@vger.kernel.org>
References: <1539953556-35762-1-git-send-email-lolivei@synopsys.com>
 <1539953556-35762-4-git-send-email-lolivei@synopsys.com>
 <20181024174007.GA2902@bogus>
From:   Luis de Oliveira <luis.oliveira@synopsys.com>
Message-ID: <45d87050-c5a8-dd96-20ae-d4951b0f4564@synopsys.com>
Date:   Tue, 13 Nov 2018 10:00:22 +0000
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:52.0) Gecko/20100101
 Thunderbird/52.9.1
MIME-Version: 1.0
In-Reply-To: <20181024174007.GA2902@bogus>
Content-Type: text/plain; charset="utf-8"
Content-Language: en-US
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk


On 24-Oct-18 18:40, Rob Herring wrote:
> On Fri, Oct 19, 2018 at 02:52:25PM +0200, Luis Oliveira wrote:
>> Add bindings for Synopsys DesignWare MIPI CSI-2 host.
>>
>> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
>> ---
>> Changelog
>> v2-V3
>> - removed IPI settings
>>
>>  .../devicetree/bindings/media/snps,dw-csi-plat.txt | 52 ++++++++++++++++++++++
>>  1 file changed, 52 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt b/Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt
>> new file mode 100644
>> index 0000000..be3da05
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/snps,dw-csi-plat.txt
>> @@ -0,0 +1,52 @@
>> +Synopsys DesignWare CSI-2 Host controller
>> +
>> +Description
>> +-----------
>> +
>> +This HW block is used to receive image coming from an MIPI CSI-2 compatible
>> +camera.
>> +
>> +Required properties:
>> +- compatible: shall be "snps,dw-csi-plat"
> 
> 'plat' is really part of the name of the h/w block?
> 

It is the name of the platform driver for CSI compatible with this block. Is
that wrong?

>> +- reg			: physical base address and size of the device memory mapped
>> +  registers;
>> +- interrupts		: CSI-2 Host interrupt
>> +- snps,output-type	: Core output to be used (IPI-> 0 or IDI->1 or BOTH->2)
>> +			  These  values choose which of the Core outputs will be used,
>> +			  it can be Image Data Interface or Image Pixel Interface.
>> +- phys			: List of one PHY specifier (as defined in
>> +			  Documentation/devicetree/bindings/phy/phy-bindings.txt).
>> +			  This PHY is a MIPI DPHY working in RX mode.
>> +- resets		: Reference to a reset controller (optional)
>> +
>> +The per-board settings:
>> + - port sub-node describing a single endpoint connected to the camera as
>> +   described in video-interfaces.txt[1].
> 
> Need to say 2 ports and what is each port? Why no port #0?
> 

I will elaborate on that.

>> +
>> +Example:
>> +
>> +	csi2_1: csi2@3000 {
>> +		compatible = "snps,dw-csi-plat";
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +		reg = < 0x03000 0x7FF>;
>> +		interrupts = <2>;
>> +		output-type = <2>;
>> +		resets = <&dw_rst 1>;
>> +		phys = <&mipi_dphy_rx1 0>;
>> +		phy-names = "csi2-dphy";
> 
> Not documented. Not really needed for a single entry, so I'd just drop 
> it.
> 

I will, thanks.

>> +
>> +		/* CSI-2 per-board settings */
>> +		port@1 {
>> +			reg = <1>;
>> +			csi1_ep1: endpoint {
>> +				remote-endpoint = <&camera_1>;
>> +				data-lanes = <1 2>;
>> +			};
>> +		};
>> +		port@2 {
>> +			csi1_ep2: endpoint {
>> +				remote-endpoint = <&vif1_ep>;
>> +			};
>> +		};
>> +	};
>> --
>> 2.7.4
>>