Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   <Andrei.Stefanescu@microchip.com>
To:     <lgirdwood@gmail.com>, <broonie@kernel.org>, <robh+dt@kernel.org>,
        <mark.rutland@arm.com>, <gregkh@linuxfoundation.org>,
        <Nicolas.Ferre@microchip.com>
CC:     <Cristian.Birsan@microchip.com>, <Claudiu.Beznea@microchip.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <Andrei.Stefanescu@microchip.com>
Subject: [PATCH 3/3] regulator: mcp16502: add regulator driver for MCP16502
Thread-Topic: [PATCH 3/3] regulator: mcp16502: add regulator driver for
 MCP16502
Thread-Index: AQHUe0QrcREzl+A6dEyfXafqi5Kdhg==
Date:   Tue, 13 Nov 2018 11:29:41 +0000
Message-ID: <1542108563-10108-4-git-send-email-andrei.stefanescu@microchip.com>
References: <1542108563-10108-1-git-send-email-andrei.stefanescu@microchip.com>
In-Reply-To: <1542108563-10108-1-git-send-email-andrei.stefanescu@microchip.com>
Accept-Language: en-US
Content-Language: en-US
x-ms-exchange-messagesentrepresentingtype: 1
x-originating-ip: [94.177.32.154]
x-ms-publictraffictype: Email
x-microsoft-exchange-diagnostics: 1;BN6PR1101MB2244;6:0o5cPuNuq+K35jDukYQwYIl4Vvc1yWlY087lSdyQYNamzNf011BTUktcoWnd+ABnI5jZjAGGerlG4/+alJdOZD9Z/wspPn7TQfog/bBREzOx+ppKt9lGzYYepmGz5Lx8L+h8IFYHD/m8fXu/7N5izsl80DEEWrnknPlRU6lJl6IWjGhMGKo3AllkYOVWjKOxNUYbIGppp5C4t4jxAcv61BaLNHdUvHG2DWB/eSkV84F3cqYzHMik0kObhvENP2gC1plu3vrBlucEob+BYG7rIMeeq0RCVSdR75IdyNYrRGsLtqvf3B52TLHm/KHvLGHhGQwRJRR47i1lEc+wWQsOBQFrzeBakL8qHpvcQaUVRlwFPn6c+V9RCfZZZrGKBsAsqDFR94cefYDRDwyvT042/XI7WoaqEm6hqx37SMV7U2HpL6IDYUHukP3n261/KWJr3LDY2Z8foMlAMISZnFFo8g==;5:QdVx+UIXzj4yjIi2OdKBWinJhzTsPDgpLBSzAIrFD7x3VNvfbug0pkcxKbTtIpTgorlj3IFJGarAB7W0iGBhYxhH9t0AjaYMgRcTJUIsMhKhen0WBtgC1FSP8cbN/UF3gAVM+mlLzA16EdAlxxT9217iB8SKWh4jvzJOCTJXT6o=;7:A1b8nx91QAhBTyBiVo0QcFFcbVic1zyhzlDG2eb/5dcAQ3fWXFRwphAmYKVqHaYLYRKoo1428nigdHcORsqHIW0oemcYe1+ywQVHxx5XBdiy65InCA7RNplbdTmhUHPtNQ+fJmGhEFfr+ppT7KJXGg==
x-ms-office365-filtering-correlation-id: 964f99ed-93ad-45eb-ffde-08d6495b4d87
x-microsoft-antispam: BCL:0;PCL:0;RULEID:(2390060)(7020095)(4652040)(8989299)(5600074)(711020)(4534185)(4627221)(201703031133081)(201702281549075)(8990200)(2017052603328)(7153060)(7193020);SRVR:BN6PR1101MB2244;
x-ms-traffictypediagnostic: BN6PR1101MB2244:
x-microsoft-antispam-prvs: <BN6PR1101MB2244D01A69C6C00B1B5FCF79EDC20@BN6PR1101MB2244.namprd11.prod.outlook.com>
x-exchange-antispam-report-test: UriScan:;
x-ms-exchange-senderadcheck: 1
x-exchange-antispam-report-cfa-test: BCL:0;PCL:0;RULEID:(6040522)(2401047)(5005006)(8121501046)(10201501046)(3002001)(3231382)(944501410)(52105112)(93006095)(93001095)(148016)(149066)(150057)(6041310)(20161123562045)(20161123564045)(20161123558120)(201703131423095)(201702281528075)(20161123555045)(201703061421075)(201703061406153)(20161123560045)(201708071742011)(7699051)(76991095);SRVR:BN6PR1101MB2244;BCL:0;PCL:0;RULEID:;SRVR:BN6PR1101MB2244;
x-forefront-prvs: 085551F5A8
x-forefront-antispam-report: SFV:NSPM;SFS:(10009020)(376002)(366004)(136003)(346002)(39860400002)(396003)(45074003)(189003)(199004)(105586002)(52116002)(54906003)(110136005)(386003)(316002)(6512007)(6506007)(53946003)(7736002)(8936002)(102836004)(2906002)(76176011)(99286004)(53936002)(81156014)(305945005)(26005)(8676002)(25786009)(106356001)(81166006)(36756003)(186003)(5660300001)(478600001)(6486002)(6116002)(72206003)(14444005)(256004)(68736007)(66066001)(14454004)(97736004)(6436002)(2900100001)(2501003)(446003)(575784001)(486006)(86362001)(4326008)(2616005)(476003)(71190400001)(6636002)(107886003)(4744004)(71200400001)(11346002)(3846002)(39060400002)(309714004);DIR:OUT;SFP:1101;SCL:1;SRVR:BN6PR1101MB2244;H:BN6PR1101MB2243.namprd11.prod.outlook.com;FPR:;SPF:None;LANG:en;PTR:InfoNoRecords;MX:1;A:1;
received-spf: None (protection.outlook.com: microchip.com does not designate
 permitted sender hosts)
x-microsoft-antispam-message-info: m/ZQngxQ1DX6JJzYiZeHh1cp+FHN0XbOz5P06z6dLL8bY5uzQPZVNXFmGtx75Zq3AzCt/AiTvbPmO3JwftWKWNZUdSDU+gZUb88jDtL0EGDLRkEeND8eVlRu1VI40VQzcCTK5IRMSkMN65sTavmx9DF/Cbh56ilVIlbMeBvENLXHM95ogJgSZ7RPRduF7Rg5Tz3PELZkYX8iF4xSinDbc1YiXmX/lr51OSIKDM5VQkfolJwzOEtp3CHMyxcupf0H2lIdRDnS9hSL5IXA/Av78+jQ2ggTs5tSNWorNlUvtDxD9kZo2BMLCJ8id0czA6HbwJ6srPag/MDdJLmq4dtgvwMLxOTtB+OzszYxp6aA9/c=
spamdiagnosticoutput: 1:99
spamdiagnosticmetadata: NSPM
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
MIME-Version: 1.0
X-MS-Exchange-CrossTenant-Network-Message-Id: 964f99ed-93ad-45eb-ffde-08d6495b4d87
X-MS-Exchange-CrossTenant-originalarrivaltime: 13 Nov 2018 11:29:41.4917
 (UTC)
X-MS-Exchange-CrossTenant-fromentityheader: Hosted
X-MS-Exchange-CrossTenant-id: 3f4057f3-b418-4d4e-ba84-d55b4e897d88
X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN6PR1101MB2244
X-OriginatorOrg: microchip.com
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

This patch adds a regulator driver for the MCP16502 PMIC.
This drivers supports basic operations through the
regulator interface such as:
- setting/reading voltage
- setting/reading operating mode
- reading current status
- transitioning to/from suspend-to-ram and standby
  power states

Signed-off-by: Andrei Stefanescu <andrei.stefanescu@microchip.com>
---
 drivers/regulator/Kconfig    |   9 +
 drivers/regulator/Makefile   |   1 +
 drivers/regulator/mcp16502.c | 524 +++++++++++++++++++++++++++++++++++++++=
++++
 3 files changed, 534 insertions(+)
 create mode 100644 drivers/regulator/mcp16502.c

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 926cee0..719d9d6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -567,6 +567,15 @@ config REGULATOR_MC13892
 	  Say y here to support the regulators found on the Freescale MC13892
 	  PMIC.
=20
+config REGULATOR_MCP16502
+	tristate "Microchip MCP16502 PMIC"
+	depends on I2C && OF
+	help
+	  Say y here to support the MCP16502 PMIC. This driver supports
+	  basic operations (get/set voltage, get/set operating mode)
+	  through the regulator interface. In addition it enables
+	  suspend-to-ram/standby transition.
+
 config REGULATOR_MT6311
 	tristate "MediaTek MT6311 PMIC"
 	depends on I2C
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 72488ef..b12e1c9 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_REGULATOR_MAX77802) +=3D max77802-regulator.=
o
 obj-$(CONFIG_REGULATOR_MC13783) +=3D mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) +=3D mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=3D  mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_MCP16502) +=3D mcp16502.o
 obj-$(CONFIG_REGULATOR_MT6311) +=3D mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+=3D mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+=3D mt6380-regulator.o
diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
new file mode 100644
index 0000000..29c72d3
--- /dev/null
+++ b/drivers/regulator/mcp16502.c
@@ -0,0 +1,524 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MCP16502 PMIC driver
+ *
+ * Copyright (C) 2018 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Andrei Stefanescu <andrei.stefanescu@microchip.com>
+ *
+ * Inspired from tps65086-regulator.c
+ */
+
+#include  <linux/gpio.h>
+#include  <linux/i2c.h>
+#include  <linux/init.h>
+#include  <linux/kernel.h>
+#include  <linux/module.h>
+#include  <linux/of.h>
+#include  <linux/regmap.h>
+#include  <linux/regulator/driver.h>
+
+#define VDD_LOW_SEL 0x0D
+#define VDD_HIGH_SEL 0x3F
+
+#define MCP16502_VOL_SEL_MASK 0x3F
+#define MCP16502_EN_MASK BIT(7)
+#define MCP16502_MODE_MASK BIT(6)
+
+/*
+ *
+ * The PMIC has four sets of registers corresponding to four power modes:
+ * Performance, Active, Low-power, Hibernate.
+ *
+ * Registers:
+ * Each regulator has a register for each power mode. To access a register
+ * for a specific regulator and mode BASE_* and OFFSET_* need to be added.
+ *
+ * Operating modes:
+ * In order for the PMIC to transition to operating modes it has to be
+ * controlled via GPIO lines called LPM and HPM.
+ *
+ * The registers are fully configurable such that you can put all regulato=
rs in
+ * a low-power state while the PMIC is in Active mode. They are supposed t=
o be
+ * configured at startup and then simply transition to/from a global low-p=
ower
+ * state by setting the GPIO lpm pin high/low.
+ *
+ * This driver keeps the PMIC in Active mode, Low-power state is set for t=
he
+ * regulators by enabling/disabling operating mode (FPWM or Auto PFM).
+ *
+ * The PMIC's Low-power and Hibernate modes are used during standby/suspen=
d.
+ * To enter standby/suspend the PMIC will go to Low-power mode. From there=
, it
+ * will transition to Hibernate when the PWRHLD line is set to low by the =
MPU.
+ */
+
+/*
+ * This macro is useful for iterating over all regulators and accessing th=
eir
+ * registers in a generic way or accessing a regulator device by its id.
+ */
+#define BASE(i) (((i) + 1) << 4)
+
+#define OFFSET_MODE_A 0
+#define OFFSET_MODE_HIB 2
+
+#define MCP16502_MODE_ACTIVE REGULATOR_MODE_NORMAL
+#define MCP16502_MODE_HIB REGULATOR_MODE_STANDBY
+
+#define MCP16502_MODE_AUTO_PFM 0
+#define MCP16502_MODE_FPWM BIT(6)
+
+#define MIN_REG 0x0
+#define MAX_REG 0x65
+
+static unsigned int mcp16502_of_map_mode(unsigned int mode)
+{
+	if (mode =3D=3D REGULATOR_MODE_NORMAL || mode =3D=3D REGULATOR_MODE_IDLE)
+		return mode;
+
+	return REGULATOR_MODE_INVALID;
+}
+
+#define MCP16502_REGULATOR(_name, _id, _ranges, _ops)			\
+	[_id] =3D {							\
+		.name			=3D _name,			\
+		.regulators_node	=3D of_match_ptr("regulators"),	\
+		.id			=3D _id,				\
+		.ops			=3D &(_ops),			\
+		.type			=3D REGULATOR_VOLTAGE,		\
+		.owner			=3D THIS_MODULE,			\
+		.linear_ranges		=3D _ranges,			\
+		.n_linear_ranges	=3D ARRAY_SIZE(_ranges),		\
+		.of_match		=3D of_match_ptr(_name),		\
+		.of_map_mode		=3D mcp16502_of_map_mode,		\
+	}
+
+enum {
+	BUCK1 =3D 0,
+	BUCK2,
+	BUCK3,
+	BUCK4,
+	LDO1,
+	LDO2,
+	NUM_REGULATORS
+};
+
+/*
+ * struct mcp16502 - PMIC representation
+ * @rdev: the regulators belonging to this chip
+ * @rmap: regmap to be used for I2C communication
+ * @lpm: LPM GPIO descriptor
+ */
+struct mcp16502 {
+	struct regulator_dev *rdev[NUM_REGULATORS];
+	struct regmap *rmap;
+	struct gpio_desc *lpm;
+};
+
+/*
+ * mcp16502_update_regulator - regmap_update_bits called for registers
+ *			       Active or Low-power depending on hibernate
+ *			       parameter
+ * @hibernate - use the registers for hibernate mode
+ *
+ */
+static int mcp16502_update_regulator(struct regulator_dev *rdev,
+				     bool hibernate,
+				     unsigned int mask, unsigned int val)
+{
+	struct mcp16502 *mcp =3D rdev_get_drvdata(rdev);
+	unsigned int reg =3D BASE(rdev_get_id(rdev));
+
+	reg +=3D (hibernate) ? OFFSET_MODE_HIB : OFFSET_MODE_A;
+
+	return regmap_update_bits(mcp->rmap, reg, mask, val);
+}
+
+/*
+ * mcp16502_read_regulator - read from Active or Low-power registers depen=
ding
+ *			     on the hibernate parameter
+ *
+ * @hibernate - use the registers for hibernate mode
+ *
+ */
+static int mcp16502_read(struct regulator_dev *rdev, bool hibernate,
+			 unsigned int mask)
+{
+	struct mcp16502 *mcp =3D rdev_get_drvdata(rdev);
+	unsigned int reg =3D BASE(rdev_get_id(rdev));
+	int ret, val;
+
+	reg +=3D (hibernate) ? OFFSET_MODE_HIB : OFFSET_MODE_A;
+
+	ret =3D regmap_read(mcp->rmap, reg, &val);
+	if (ret)
+		return ret;
+
+	return val & mask;
+}
+
+/*
+ * mcp16502_gpio_set_mode - set the GPIO corresponding value
+ *
+ * Used to prepare transitioning into hibernate or resuming from it.
+ */
+static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
+{
+	int lpm =3D (mode =3D=3D MCP16502_MODE_HIB);
+
+	gpiod_set_value(mcp->lpm, lpm);
+}
+
+/*
+ * mcp16502_get_mode - return the current operating mode of a regulator
+ *
+ * Note: all functions that are not part of entering/exiting standby/suspe=
nd
+ *	 use the Active mode registers.
+ *
+ * Note: this is different from the PMIC's operatig mode, it is the
+ *	 MODE bit from the regulator's register.
+ */
+static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
+{
+	int val;
+
+	val =3D mcp16502_read(rdev, false, MCP16502_MODE_MASK);
+	if (val < 0)
+		return val;
+
+	if (val =3D=3D MCP16502_MODE_FPWM)
+		return REGULATOR_MODE_NORMAL;
+	else if (val =3D=3D MCP16502_MODE_AUTO_PFM)
+		return REGULATOR_MODE_IDLE;
+
+	return REGULATOR_MODE_INVALID;
+}
+
+/*
+ * mcp16502_is_enabled - regulator_ops is_enabled
+ */
+static int mcp16502_is_enabled(struct regulator_dev *rdev)
+{
+	int val;
+
+	val =3D mcp16502_read(rdev, false, MCP16502_EN_MASK);
+	if (val < 0)
+		return val;
+
+	return !!val;
+}
+
+/*
+ * mcp16502_disable - regulator_ops disable
+ */
+static int mcp16502_disable(struct regulator_dev *rdev)
+{
+	return mcp16502_update_regulator(rdev, false, MCP16502_EN_MASK, 0);
+}
+
+/*
+ * _mcp16502_set_mode - helper for set_mode and set_suspend_mode
+ */
+static int _mcp16502_set_mode(struct regulator_dev *rdev, bool hibernate,
+			      unsigned int mode)
+{
+	int val;
+
+	if (mode !=3D REGULATOR_MODE_NORMAL && mode !=3D REGULATOR_MODE_IDLE)
+		return -EINVAL;
+
+	val =3D (mode =3D=3D REGULATOR_MODE_NORMAL) ? MCP16502_MODE_FPWM :
+						MCP16502_MODE_AUTO_PFM;
+
+	return mcp16502_update_regulator(rdev, hibernate, MCP16502_MODE_MASK,
+					 val);
+}
+
+/*
+ * mcp16502_set_mode - regulator_ops set_mode
+ */
+static int mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode=
)
+{
+	return _mcp16502_set_mode(rdev, false, mode);
+}
+
+/*
+ * mcp16502_enable - regulator_ops enable
+ */
+static int mcp16502_enable(struct regulator_dev *rdev)
+{
+	return mcp16502_update_regulator(rdev, false, MCP16502_EN_MASK,
+					 MCP16502_EN_MASK);
+}
+
+/*
+ * mcp16502_get_voltage_sel - regulator_ops get_voltage_sel
+ */
+static int mcp16502_get_voltage_sel(struct regulator_dev *rdev)
+{
+	return mcp16502_read(rdev, false, MCP16502_VOL_SEL_MASK);
+}
+
+/*
+ * mcp16502_set_voltage_sel - regulator_ops set_voltage_sel
+ */
+static int mcp16502_set_voltage_sel(struct regulator_dev *rdev,
+				    unsigned int selector)
+{
+	return mcp16502_update_regulator(rdev, false, MCP16502_VOL_SEL_MASK,
+					 selector);
+}
+
+/*
+ * mcp16502_get_status - regulator_ops get_status
+ */
+static int mcp16502_get_status(struct regulator_dev *rdev)
+{
+	int mode =3D mcp16502_get_mode(rdev);
+
+	if (!mcp16502_is_enabled(rdev))
+		return REGULATOR_STATUS_OFF;
+	else if (mode =3D=3D REGULATOR_MODE_NORMAL)
+		return REGULATOR_STATUS_NORMAL;
+	else if (mode =3D=3D REGULATOR_MODE_IDLE)
+		return REGULATOR_STATUS_IDLE;
+
+	return REGULATOR_STATUS_UNDEFINED;
+}
+
+/*
+ * mcp16502_set_suspend_voltage - regulator_ops set_suspend_voltage
+ */
+int mcp16502_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	int sel =3D regulator_map_voltage_linear_range(rdev, uV, uV);
+
+	if (sel < 0)
+		return sel;
+
+	return mcp16502_update_regulator(rdev, true, MCP16502_VOL_SEL_MASK,
+					 sel);
+}
+
+/*
+ * mcp16502_set_suspend_mode - regulator_ops set_suspend_mode
+ */
+int mcp16502_set_suspend_mode(struct regulator_dev *rdev, unsigned int mod=
e)
+{
+	return _mcp16502_set_mode(rdev, true, mode);
+}
+
+/*
+ * mcp16502_set_suspend_enable - regulator_ops set_suspend_enable
+ */
+static int mcp16502_set_suspend_enable(struct regulator_dev *rdev)
+{
+	return mcp16502_update_regulator(rdev, true, MCP16502_EN_MASK,
+					 MCP16502_EN_MASK);
+}
+
+/*
+ * mcp16502_set_suspend_disable - regulator_ops set_suspend_disable
+ */
+static int mcp16502_set_suspend_disable(struct regulator_dev *rdev)
+{
+	return mcp16502_update_regulator(rdev, true, MCP16502_EN_MASK, 0);
+}
+
+static const struct regulator_ops mcp16502_buck_ops =3D {
+	.list_voltage			=3D regulator_list_voltage_linear_range,
+	.map_voltage			=3D regulator_map_voltage_linear_range,
+	.get_voltage_sel		=3D mcp16502_get_voltage_sel,
+	.set_voltage_sel		=3D mcp16502_set_voltage_sel,
+	.enable				=3D mcp16502_enable,
+	.disable			=3D mcp16502_disable,
+	.is_enabled			=3D mcp16502_is_enabled,
+	.set_mode			=3D mcp16502_set_mode,
+	.get_mode			=3D mcp16502_get_mode,
+	.get_status			=3D mcp16502_get_status,
+	.set_suspend_voltage		=3D mcp16502_set_suspend_voltage,
+	.set_suspend_mode		=3D mcp16502_set_suspend_mode,
+	.set_suspend_enable		=3D mcp16502_set_suspend_enable,
+	.set_suspend_disable		=3D mcp16502_set_suspend_disable,
+};
+
+/*
+ * LDOs cannot change operating modes.
+ */
+static const struct regulator_ops mcp16502_ldo_ops =3D {
+	.list_voltage			=3D regulator_list_voltage_linear_range,
+	.map_voltage			=3D regulator_map_voltage_linear_range,
+	.get_voltage_sel		=3D mcp16502_get_voltage_sel,
+	.set_voltage_sel		=3D mcp16502_set_voltage_sel,
+	.enable				=3D mcp16502_enable,
+	.disable			=3D mcp16502_disable,
+	.is_enabled			=3D mcp16502_is_enabled,
+	.get_status			=3D mcp16502_get_status,
+	.set_suspend_voltage		=3D mcp16502_set_suspend_voltage,
+	.set_suspend_enable		=3D mcp16502_set_suspend_enable,
+	.set_suspend_disable		=3D mcp16502_set_suspend_disable,
+};
+
+static const struct of_device_id mcp16502_ids[] =3D {
+	{ .compatible =3D "microchip,mcp16502", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, mcp16502_ids);
+
+static const struct regulator_linear_range b1l12_ranges[] =3D {
+	REGULATOR_LINEAR_RANGE(1200000, VDD_LOW_SEL, VDD_HIGH_SEL, 50000),
+};
+
+static const struct regulator_linear_range b234_ranges[] =3D {
+	REGULATOR_LINEAR_RANGE(600000, VDD_LOW_SEL, VDD_HIGH_SEL, 25000),
+};
+
+static const struct regulator_desc mcp16502_desc[] =3D {
+	/* MCP16502_REGULATOR(_name, _id, ranges, regulator_ops) */
+	MCP16502_REGULATOR("VDD_IO", BUCK1, b1l12_ranges, mcp16502_buck_ops),
+	MCP16502_REGULATOR("VDD_DDR", BUCK2, b234_ranges, mcp16502_buck_ops),
+	MCP16502_REGULATOR("VDD_CORE", BUCK3, b234_ranges, mcp16502_buck_ops),
+	MCP16502_REGULATOR("VDD_OTHER", BUCK4, b234_ranges, mcp16502_buck_ops),
+	MCP16502_REGULATOR("LDO1", LDO1, b1l12_ranges, mcp16502_ldo_ops),
+	MCP16502_REGULATOR("LDO2", LDO2, b1l12_ranges, mcp16502_ldo_ops)
+};
+
+static const struct regmap_range mcp16502_ranges[] =3D {
+	regmap_reg_range(MIN_REG, MAX_REG)
+};
+
+static const struct regmap_access_table mcp16502_yes_reg_table =3D {
+	.yes_ranges =3D mcp16502_ranges,
+	.n_yes_ranges =3D ARRAY_SIZE(mcp16502_ranges),
+};
+
+static const struct regmap_config mcp16502_regmap_config =3D {
+	.reg_bits	=3D 8,
+	.val_bits	=3D 8,
+	.max_register	=3D MAX_REG,
+	.cache_type	=3D REGCACHE_NONE,
+	.rd_table	=3D &mcp16502_yes_reg_table,
+	.wr_table	=3D &mcp16502_yes_reg_table,
+};
+
+/*
+ * set_up_regulators - initialize all regulators
+ */
+static int setup_regulators(struct mcp16502 *mcp, struct device *dev,
+			    struct regulator_config config)
+{
+	int i;
+
+	for (i =3D 0; i < NUM_REGULATORS; i++) {
+		mcp->rdev[i] =3D devm_regulator_register(dev,
+						       &mcp16502_desc[i],
+						       &config);
+		if (IS_ERR(mcp->rdev[i])) {
+			dev_err(dev,
+				"failed to register %s regulator %ld\n",
+				mcp16502_desc[i].name, PTR_ERR(mcp->rdev[i]));
+			return PTR_ERR(mcp->rdev[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int mcp16502_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct regulator_config config =3D { };
+	struct device *dev;
+	struct mcp16502 *mcp;
+	int ret =3D 0;
+
+	dev =3D &client->dev;
+	config.dev =3D dev;
+
+	mcp =3D devm_kzalloc(dev, sizeof(*mcp), GFP_KERNEL);
+	if (!mcp)
+		return -ENOMEM;
+
+	mcp->rmap =3D devm_regmap_init_i2c(client, &mcp16502_regmap_config);
+	if (IS_ERR(mcp->rmap)) {
+		ret =3D PTR_ERR(mcp->rmap);
+		dev_err(dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, mcp);
+	config.regmap =3D mcp->rmap;
+	config.driver_data =3D mcp;
+
+	mcp->lpm =3D devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
+	if (IS_ERR(mcp->lpm)) {
+		dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
+		return PTR_ERR(mcp->lpm);
+	}
+
+	ret =3D setup_regulators(mcp, dev, config);
+	if (ret !=3D 0)
+		return ret;
+
+	mcp16502_gpio_set_mode(mcp, MCP16502_MODE_ACTIVE);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mcp16502_suspend(struct device *dev)
+{
+	struct i2c_client *client =3D to_i2c_client(dev);
+	struct mcp16502 *mcp =3D i2c_get_clientdata(client);
+
+	mcp16502_gpio_set_mode(mcp, MCP16502_MODE_HIB);
+
+	return 0;
+}
+
+static int mcp16502_resume(struct device *dev)
+{
+	struct i2c_client *client =3D to_i2c_client(dev);
+	struct mcp16502 *mcp =3D i2c_get_clientdata(client);
+
+	mcp16502_gpio_set_mode(mcp, MCP16502_MODE_ACTIVE);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops mcp16502_pm_ops =3D {
+	SET_SYSTEM_SLEEP_PM_OPS(mcp16502_suspend, mcp16502_resume)
+};
+
+static const struct i2c_device_id mcp16502_i2c_id[] =3D {
+	{ "mcp16502", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcp16502_i2c_id);
+
+static struct i2c_driver mcp16502_drv =3D {
+	.probe		=3D mcp16502_probe,
+	.driver		=3D {
+		.name	=3D "mcp16502-regulator",
+		.owner		=3D THIS_MODULE,
+		.of_match_table	=3D of_match_ptr(mcp16502_ids),
+		.pm =3D &mcp16502_pm_ops,
+	},
+	.id_table	=3D mcp16502_i2c_id,
+};
+
+static int __init mcp16502_init(void)
+{
+	return i2c_add_driver(&mcp16502_drv);
+}
+
+static void __exit mcp16502_exit(void)
+{
+}
+
+module_init(mcp16502_init);
+module_exit(mcp16502_exit);
+
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("MCP16502 PMIC driver");
+MODULE_AUTHOR("Andrei Stefanescu andrei.stefanescu@microchip.com");
--=20
2.7.4