Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265285AbUAJSbh (ORCPT ); Sat, 10 Jan 2004 13:31:37 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265275AbUAJSbh (ORCPT ); Sat, 10 Jan 2004 13:31:37 -0500 Received: from ss1000.ms.mff.cuni.cz ([195.113.19.221]:55946 "EHLO ss1000.ms.mff.cuni.cz") by vger.kernel.org with ESMTP id S265359AbUAJSb1 (ORCPT ); Sat, 10 Jan 2004 13:31:27 -0500 Date: Sat, 10 Jan 2004 19:31:16 +0100 From: Rudo Thomas To: linux-kernel@vger.kernel.org Cc: Vojtech Pavlik Subject: [2.6.1] atkbd.c: Unknown key released Message-ID: <20040110183116.GA8319@ss1000.ms.mff.cuni.cz> Mail-Followup-To: linux-kernel@vger.kernel.org, Vojtech Pavlik Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="8t9RHnE3ZwKMSgU+" Content-Disposition: inline User-Agent: Mutt/1.5.4i-ja.1 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 14191 Lines: 325 --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello. This line shows up twice in dmesg when starting up X. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Tried with 2.6.1, 2.6.1-mm1. It does not happen in 2.6.0, IIRC. I don't seem to be able to reproduce the message by pressing any combination on keyboard. Full dmesg output is atteched. Rudo. --8t9RHnE3ZwKMSgU+ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline; filename=dmesg-output Linux version 2.6.1 (rudo@rudo.kolej.mff.cuni.cz) (gcc version 3.3.2 20031201 (Gentoo Linux 3.3.2-r4, propolice)) #2 Fri Jan 9 11:22:41 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fffc000 (usable) BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65532 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61436 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f5c10 ACPI: RSDT (v001 ASUS A7V333 0x42302e31 MSFT 0x31313031) @ 0x0fffc000 ACPI: FADT (v001 ASUS A7V333 0x42302e31 MSFT 0x31313031) @ 0x0fffc0b2 ACPI: BOOT (v001 ASUS A7V333 0x42302e31 MSFT 0x31313031) @ 0x0fffc030 ACPI: MADT (v001 ASUS A7V333 0x42302e31 MSFT 0x31313031) @ 0x0fffc058 ACPI: DSDT (v001 ASUS A7V333 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:6 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x1]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3]) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux-2.6 rw root=302 nmi_watchdog=1 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 1535.887 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 256500k/262128k available (1504k kernel code, 4908k reserved, 481k data, 148k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3022.84 BogoMIPS Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 1800+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 activating NMI Watchdog ... done. testing NMI watchdog ... OK. number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178002 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0002 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1535.0001 MHz. ..... host bus clock speed is 266.0956 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf17e0, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031002 IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17 Mode:1 Active:1) 00:00:05[A] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1) 00:00:05[B] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19 Mode:1 Active:1) 00:00:06[A] -> 2-19 -> IRQ 19 Pin 2-17 already programmed Pin 2-19 already programmed IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16 Mode:1 Active:1) 00:00:0c[B] -> 2-16 -> IRQ 16 Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21 Mode:1 Active:1) 00:00:11[D] -> 2-21 -> IRQ 21 Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-16 already programmed Pin 2-17 already programmed ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x80 Machine check exception polling timer started. ikconfig 0.7 with /proc/config* devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:09.0, from 5 to 3 PCI: Via IRQ fixup for 0000:00:09.1, from 11 to 0 PCI: Via IRQ fixup for 0000:00:11.2, from 9 to 5 PCI: Via IRQ fixup for 0000:00:11.3, from 9 to 5 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: No IRQ known for interrupt pin A of device 0000:00:11.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xa800-0xa807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xa808-0xa80f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6E040L0, ATA DISK drive hdb: WDC WD136BA, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive hdd: Hewlett-Packard CD-Writer Plus 9100, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 hdb: max request size: 128KiB hdb: 26712000 sectors (13676 MB) w/1961KiB Cache, CHS=26500/16/63, UDMA(33) /dev/ide/host0/bus0/target1/lun0: p1 p2 mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 found reiserfs format "3.6" with standard journal Reiserfs journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 reiserfs: checking transaction log (hda2) for (hda2) Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem). Freeing unused kernel memory: 148k freed Adding 530136k swap on /dev/hda3. Priority:-1 extents:1 hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33) inserting floppy driver for 2.6.1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xd091b000, 00:0a:cd:03:b6:03, IRQ 18 eth0: Identified 8139 chip type 'RTL-8100B/8139D' Creative EMU10K1 PCI Audio Driver, version 0.20a, 11:16:48 Jan 9 2004 emu10k1: EMU10K1 rev 7 model 0x8061 found, IO at 0xb400-0xb41f, IRQ 19 ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708) emu10k1: SBLive! 5.1 card detected cmpci: version $Revision: 5.64 $ time 11:16:32 Jan 9 2004 cmpci: found CM8738 adapter at io 0xd800 irq 17 cmpci: chip version = 055 drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 uhci_hcd 0000:00:09.0: UHCI Host Controller uhci_hcd 0000:00:09.0: irq 19, io base 0000d400 uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected uhci_hcd 0000:00:09.1: UHCI Host Controller uhci_hcd 0000:00:09.1: irq 16, io base 0000d000 uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:11.2: UHCI Host Controller uhci_hcd 0000:00:11.2: irq 21, io base 0000a400 uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:11.3: UHCI Host Controller uhci_hcd 0000:00:11.3: irq 21, io base 0000a000 uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ehci_hcd 0000:00:09.2: EHCI Host Controller ehci_hcd 0000:00:09.2: irq 17, pci mem d091d000 ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:09.2: USB 2.0 enabled, EHCI 0.95, driver 2003-Jun-13 hub 5-0:1.0: USB hub found hub 5-0:1.0: 4 ports detected drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver registering 0-002d registering 0-0049 registering 0-0048 hub 3-0:1.0: new USB device on port 2, assigned address 2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:11.2-2 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 blk: queue c13d1600, I/O limit 4095Mb (mask 0xffffffff) blk: queue c13d1200, I/O limit 4095Mb (mask 0xffffffff) atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). --8t9RHnE3ZwKMSgU+-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/