Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S265734AbUAKDOO (ORCPT ); Sat, 10 Jan 2004 22:14:14 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S265736AbUAKDOO (ORCPT ); Sat, 10 Jan 2004 22:14:14 -0500 Received: from hermes.fachschaften.tu-muenchen.de ([129.187.202.12]:19665 "HELO hermes.fachschaften.tu-muenchen.de") by vger.kernel.org with SMTP id S265734AbUAKDNZ (ORCPT ); Sat, 10 Jan 2004 22:13:25 -0500 Date: Sun, 11 Jan 2004 04:13:21 +0100 From: Adrian Bunk To: Nick Piggin , Matt Mackall , linux-kernel Subject: Re: [1/4] better i386 CPU selection Message-ID: <20040111031321.GB25089@fs.tum.de> References: <20040106054859.GA18208@waste.org> <3FFA56D6.6040808@cyberone.com.au> <20040106064607.GB18208@waste.org> <3FFA5ED3.6040000@cyberone.com.au> <20040110004625.GB25089@fs.tum.de> <20040110005232.GD25089@fs.tum.de> <20040110110443.GA29693@wiggy.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20040110110443.GA29693@wiggy.net> User-Agent: Mutt/1.4.1i Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 25739 Lines: 749 On Sat, Jan 10, 2004 at 12:04:43PM +0100, Wichert Akkerman wrote: > Previously Adrian Bunk wrote: > > - changed the i386 CPU selection from a choice to single options for > > every cpu > > There was another patch last week which added a seperate option for > Centrino CPUs, perhaps you can fold that into this patch? The current > situation is quite confusing since none of the CPU choices mention > Centrine. Thanks for this suggestion. An updated version of this patch is below. > Wichert. cu Adrian Changes: - changed the i386 CPU selection from a choice to single options for every cpu - X86_GENERIC is no longer required - renamed the M* variables to CPU_*, this is needed to ask the users upgrading from older kernels instead of silently changing the semantics - added Pentium M and Pentium-4 M - X86_GOOD_APIC -> X86_BAD_APIC - AMD Elan is a different subarch, you can't configure a kernel that runs on both the AMD Elan and other i386 CPUs - added optimizing CFLAGS for the AMD Elan - gcc 2.95 supports -march=k6 (no need for check_gcc) - help text changes/updates TODO: - module versioning diffstat output: arch/i386/Kconfig | 273 ++++++++++++--------------- arch/i386/Makefile | 58 +++-- arch/i386/boot/setup.S | 2 arch/i386/kernel/cpu/cpufreq/Kconfig | 2 arch/i386/lib/mmx.c | 2 arch/i386/mach-voyager/voyager_smp.c | 6 arch/x86_64/Kconfig | 4 drivers/serial/8250.h | 2 include/asm-i386/apic.h | 4 include/asm-i386/bugs.h | 7 include/asm-i386/module.h | 4 include/asm-i386/processor.h | 4 include/asm-i386/timex.h | 2 include/asm-x86_64/apic.h | 2 14 files changed, 186 insertions(+), 186 deletions(-) --- linux-2.6.0-test5-mm4/include/asm-i386/processor.h.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/include/asm-i386/processor.h 2003-09-25 14:28:16.000000000 +0200 @@ -555,7 +555,7 @@ #define K7_NOP7 ".byte 0x8D,0x04,0x05,0,0,0,0\n" #define K7_NOP8 K7_NOP7 ASM_NOP1 -#ifdef CONFIG_MK8 +#ifdef CONFIG_CPU_ONLY_K8 #define ASM_NOP1 K8_NOP1 #define ASM_NOP2 K8_NOP2 #define ASM_NOP3 K8_NOP3 @@ -564,7 +564,7 @@ #define ASM_NOP6 K8_NOP6 #define ASM_NOP7 K8_NOP7 #define ASM_NOP8 K8_NOP8 -#elif defined(CONFIG_MK7) +#elif defined(CONFIG_CPU_ONLY_K7) #define ASM_NOP1 K7_NOP1 #define ASM_NOP2 K7_NOP2 #define ASM_NOP3 K7_NOP3 --- linux-2.6.0-test5-mm4/drivers/serial/8250.h.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/drivers/serial/8250.h 2003-09-25 14:28:16.000000000 +0200 @@ -44,7 +44,7 @@ #undef SERIAL_DEBUG_PCI -#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486)) +#if defined(__i386__) && (defined(CONFIG_CPU_386) || defined(CONFIG_CPU_486)) #define SERIAL_INLINE #endif --- linux-2.6.0-test5-mm4/arch/i386/boot/setup.S.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/arch/i386/boot/setup.S 2003-09-25 14:28:16.000000000 +0200 @@ -755,7 +755,7 @@ # AMD Elan bug fix by Robert Schwebel. # -#if defined(CONFIG_MELAN) +#if defined(CONFIG_X86_ELAN) movb $0x02, %al # alternate A20 gate outb %al, $0x92 # this works on SC410/SC520 a20_elan_wait: --- linux-2.6.0-test5-mm4/include/asm-i386/timex.h.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/include/asm-i386/timex.h 2003-09-25 14:28:16.000000000 +0200 @@ -12,7 +12,7 @@ #ifdef CONFIG_X86_PC9800 extern int CLOCK_TICK_RATE; #else -#ifdef CONFIG_MELAN +#ifdef CONFIG_X86_ELAN # define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */ #else # define CLOCK_TICK_RATE 1193182 /* Underlying HZ */ --- linux-2.6.0-test5-mm4/arch/i386/lib/mmx.c.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/arch/i386/lib/mmx.c 2003-09-25 14:28:16.000000000 +0200 @@ -121,7 +121,7 @@ return p; } -#ifdef CONFIG_MK7 +#ifdef CONFIG_CPU_ONLY_K7 /* * The K7 has streaming cache bypass load/store. The Cyrix III, K6 and --- linux-2.6.0-test5-mm4/include/asm-i386/bugs.h.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/include/asm-i386/bugs.h 2003-09-25 14:28:16.000000000 +0200 @@ -165,9 +165,8 @@ * - In order to run on anything without a TSC, we need to be * compiled for a i486. * - In order to support the local APIC on a buggy Pentium machine, - * we need to be compiled with CONFIG_X86_GOOD_APIC disabled, - * which happens implicitly if compiled for a Pentium or lower - * (unless an advanced selection of CPU features is used) as an + * we need to be compiled with CONFIG_X86_BAD_APIC enabled, + * which happens implicitly if compiled for a Pentium as an * otherwise config implies a properly working local APIC without * the need to do extra reads from the APIC. */ @@ -198,7 +197,7 @@ * integrated APIC (see 11AP erratum in "Pentium Processor * Specification Update"). */ -#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC) +#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_BAD_APIC) if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && cpu_has_apic && boot_cpu_data.x86 == 5 --- linux-2.6.0-test5-mm4/include/asm-i386/apic.h.old 2003-09-25 14:28:07.000000000 +0200 +++ linux-2.6.0-test5-mm4/include/asm-i386/apic.h 2003-09-25 14:28:16.000000000 +0200 @@ -41,7 +41,7 @@ do { } while ( apic_read( APIC_ICR ) & APIC_ICR_BUSY ); } -#ifdef CONFIG_X86_GOOD_APIC +#ifndef CONFIG_X86_BAD_APIC # define FORCE_READ_AROUND_WRITE 0 # define apic_read_around(x) # define apic_write_around(x,y) apic_write((x),(y)) @@ -56,7 +56,7 @@ /* * ack_APIC_irq() actually gets compiled as a single instruction: * - a single rmw on Pentium/82489DX - * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC) + * - a single write on P6+ cores (!CONFIG_X86_BAD_APIC) * ... yummie. */ --- linux-2.6.1-rc1/arch/i386/mach-voyager/voyager_smp.c.old 2004-01-08 03:50:02.000000000 +0100 +++ linux-2.6.1-rc1/arch/i386/mach-voyager/voyager_smp.c 2004-01-08 03:51:34.000000000 +0100 @@ -553,7 +553,7 @@ /* For the 486, we can't use the 4Mb page table trick, so * must map a region of memory */ -#ifdef CONFIG_M486 +#ifdef CONFIG_CPU_486 int i; unsigned long *page_table_copies = (unsigned long *) __get_free_page(GFP_KERNEL); @@ -612,7 +612,7 @@ /* set the original swapper_pg_dir[0] to map 0 to 4Mb transparently * (so that the booting CPU can find start_32 */ orig_swapper_pg_dir0 = swapper_pg_dir[0]; -#ifdef CONFIG_M486 +#ifdef CONFIG_CPU_486 if(page_table_copies == NULL) panic("No free memory for 486 page tables\n"); for(i = 0; i < PAGE_SIZE/sizeof(unsigned long); i++) @@ -669,7 +669,7 @@ /* reset the page table */ swapper_pg_dir[0] = orig_swapper_pg_dir0; local_flush_tlb(); -#ifdef CONFIG_M486 +#ifdef CONFIG_CPU_486 free_page((unsigned long)page_table_copies); #endif --- linux-2.6.1-rc1/arch/i386/kernel/cpu/cpufreq/Kconfig.old 2004-01-08 04:04:37.000000000 +0100 +++ linux-2.6.1-rc1/arch/i386/kernel/cpu/cpufreq/Kconfig 2004-01-08 04:05:26.000000000 +0100 @@ -54,7 +54,7 @@ config ELAN_CPUFREQ tristate "AMD Elan" - depends on CPU_FREQ_TABLE && MELAN + depends on CPU_FREQ_TABLE && X86_ELAN ---help--- This adds the CPUFreq driver for AMD Elan SC400 and SC410 processors. --- linux-2.6.1-rc1-tiny/arch/x86_64/Kconfig.old 2004-01-08 04:25:51.000000000 +0100 +++ linux-2.6.1-rc1-tiny/arch/x86_64/Kconfig 2004-01-08 04:26:53.000000000 +0100 @@ -108,10 +108,6 @@ bool default y -config X86_GOOD_APIC - bool - default y - config X86_MSR tristate "/dev/cpu/*/msr - Model-specific register support" help --- linux-2.6.1-rc1-tiny/include/asm-x86_64/apic.h.old 2004-01-08 04:28:36.000000000 +0100 +++ linux-2.6.1-rc1-tiny/include/asm-x86_64/apic.h 2004-01-08 04:29:17.000000000 +0100 @@ -52,7 +52,7 @@ /* * ack_APIC_irq() actually gets compiled as a single instruction: * - a single rmw on Pentium/82489DX - * - a single write on P6+ cores (CONFIG_X86_GOOD_APIC) + * - a single write on P6+ cores (!CONFIG_X86_BAD_APIC) * ... yummie. */ --- linux-2.6.1/arch/i386/Kconfig.old 2004-01-10 15:12:39.000000000 +0100 +++ linux-2.6.1/arch/i386/Kconfig 2004-01-10 15:22:40.000000000 +0100 @@ -43,6 +43,15 @@ help Choose this option if your computer is a standard PC or compatible. +config X86_ELAN + bool "Elan" + help + Select this for an AMD Elan processor. + + Do not use this option for K6/Athlon/Opteron processors! + + If unsure choose "PC-compatible" instead. + config X86_VOYAGER bool "Voyager (NCR)" help @@ -130,48 +139,19 @@ default y depends on SMP && X86_ES7000 && MPENTIUMIII -choice - prompt "Processor family" - default M686 -config M386 - bool "386" - ---help--- - This is the processor type of your CPU. This information is used for - optimizing purposes. In order to compile a kernel that can run on - all x86 CPU types (albeit not optimally fast), you can specify - "386" here. - - The kernel will not necessarily run on earlier architectures than - the one you have chosen, e.g. a Pentium optimized kernel will run on - a PPro, but not necessarily on a i486. - - Here are the settings recommended for greatest speed: - - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI - 486DLC/DLC2, UMC 486SX-S and NexGen Nx586. Only "386" kernels - will run on a 386 class machine. - - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or - SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. - - "586" for generic Pentium CPUs lacking the TSC - (time stamp counter) register. - - "Pentium-Classic" for the Intel Pentium. - - "Pentium-MMX" for the Intel Pentium MMX. - - "Pentium-Pro" for the Intel Pentium Pro. - - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron. - - "Pentium-III" for the Intel Pentium III or Coppermine Celeron. - - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron. - - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D). - - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird). - - "Crusoe" for the Transmeta Crusoe series. - - "Winchip-C6" for original IDT Winchip. - - "Winchip-2" for IDT Winchip 2. - - "Winchip-2A" for IDT Winchips with 3dNow! capabilities. - - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3. - - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above). +if !X86_ELAN + +menu "Processor support" - If you don't know what to do, choose "386". +comment "Select all processors your kernel should support" + +config CPU_386 + bool "386" + help + Select this for a 386 series processor. -config M486 +config CPU_486 bool "486" help Select this for a 486 series processor, either Intel or one of the @@ -179,227 +159,230 @@ DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S. -config M586 +config CPU_586 bool "586/K5/5x86/6x86/6x86MX" help - Select this for an 586 or 686 series processor such as the AMD K5, - the Intel 5x86 or 6x86, or the Intel 6x86MX. This choice does not - assume the RDTSC (Read Time Stamp Counter) instruction. + Select this for a non-Intel 586 or 686 series processor such as + the AMD K5 or the Cyrix 6x86MX. + + Several CPUs that have their own options below (e.g. AMD K6, + Duron, Athlon and Opteeron, IDT Winchip, Cyrix III and + VIA C3) do _not_ need this option. + + This choice does not assume the RDTSC (Read Time Stamp Counter) + instruction. -config M586TSC +config CPU_586TSC bool "Pentium-Classic" help Select this for a Pentium Classic processor with the RDTSC (Read - Time Stamp Counter) instruction for benchmarking. + Time Stamp Counter) instruction. -config M586MMX +config CPU_586MMX bool "Pentium-MMX" help Select this for a Pentium with the MMX graphics/multimedia extended instructions. -config M686 +config CPU_686 bool "Pentium-Pro" help - Select this for Intel Pentium Pro chips. This enables the use of - Pentium Pro extended instructions, and disables the init-time guard - against the f00f bug found in earlier Pentiums. + Select this for Intel Pentium Pro chips. -config MPENTIUMII +config CPU_PENTIUMII bool "Pentium-II/Celeron(pre-Coppermine)" help Select this for Intel chips based on the Pentium-II and - pre-Coppermine Celeron core. This option enables an unaligned - copy optimization, compiles the kernel with optimization flags - tailored for the chip, and applies any applicable Pentium Pro - optimizations. + pre-Coppermine Celeron core. -config MPENTIUMIII +config CPU_PENTIUMIII bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon" help Select this for Intel chips based on the Pentium-III and - Celeron-Coppermine core. This option enables use of some - extended prefetch instructions in addition to the Pentium II - extensions. - -config MPENTIUM4 - bool "Pentium-4/Celeron(P4-based)/Xeon" - help - Select this for Intel Pentium 4 chips. This includes both - the Pentium 4 and P4-based Celeron chips. This option - enables compile flags optimized for the chip, uses the - correct cache shift, and applies any applicable Pentium III - optimizations. + Celeron-Coppermine core. -config MK6 +config CPU_PENTIUMM + bool "Pentium M" + help + Select this for Intel Pentium M (not Pentium-4 M) + notebook chips. + +config CPU_PENTIUM4 + bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon" + help + Select this for Intel Pentium 4 chips. This includes + the Pentium 4, P4-based Celeron and Xeon, and + Pentium-4 M (not Pentium M) chips. + +config CPU_K6 bool "K6/K6-II/K6-III" help - Select this for an AMD K6-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. + Select this for an AMD K6, K6-II or K6-III (aka K6-3D). -config MK7 +config CPU_K7 bool "Athlon/Duron/K7" help - Select this for an AMD Athlon K7-family processor. Enables use of - some extended instructions, and passes appropriate optimization - flags to GCC. + Select this for an AMD Athlon K7-family processor. -config MK8 +config CPU_K8 bool "Opteron/Athlon64/Hammer/K8" help - Select this for an AMD Opteron or Athlon64 Hammer-family processor. Enables - use of some extended instructions, and passes appropriate optimization - flags to GCC. - -config MELAN - bool "Elan" + Select this for an AMD Opteron or Athlon64 Hammer-family processor. -config MCRUSOE +config CPU_CRUSOE bool "Crusoe" help - Select this for a Transmeta Crusoe processor. Treats the processor - like a 586 with TSC, and sets some GCC optimization flags (like a - Pentium Pro with no alignment requirements). + Select this for a Transmeta Crusoe processor. -config MWINCHIPC6 +config CPU_WINCHIPC6 bool "Winchip-C6" help - Select this for an IDT Winchip C6 chip. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. + Select this for an IDT Winchip C6 chip. -config MWINCHIP2 +config CPU_WINCHIP2 bool "Winchip-2" help - Select this for an IDT Winchip-2. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment requirements. + Select this for an IDT Winchip-2. -config MWINCHIP3D +config CPU_WINCHIP3D bool "Winchip-2A/Winchip-3" help - Select this for an IDT Winchip-2A or 3. Linux and GCC - treat this chip as a 586TSC with some extended instructions - and alignment reqirements. Also enable out of order memory - stores for this CPU, which can increase performance of some - operations. - -config MCYRIXIII - bool "CyrixIII/VIA-C3" - help - Select this for a Cyrix III or C3 chip. Presently Linux and GCC - treat this chip as a generic 586. Whilst the CPU is 686 class, - it lacks the cmov extension which gcc assumes is present when - generating 686 code. - Note that Nehemiah (Model 9) and above will not boot with this - kernel due to them lacking the 3DNow! instructions used in earlier - incarnations of the CPU. + Select this for an IDT Winchip-2A or 3 with 3dNow! + capabilities. + +config CPU_CYRIXIII + bool "Cyrix III/VIA C3" + help + Select this for a Cyrix III or VIA C3 chip. -config MVIAC3_2 + Note that Nehemiah (Model 9) and above need the next + option instead. + +config CPU_VIAC3_2 bool "VIA C3-2 (Nehemiah)" help - Select this for a VIA C3 "Nehemiah". Selecting this enables usage - of SSE and tells gcc to treat the CPU as a 686. - Note, this kernel will not boot on older (pre model 9) C3s. + Select this for a VIA C3 "Nehemiah" (model 9 and above). -endchoice +endmenu -config X86_GENERIC - bool "Generic x86 support" - help - Including some tuning for non selected x86 CPUs too. - when it has moderate overhead. This is intended for generic - distributions kernels. +endif + +# +# helper options +# +config CPU_INTEL + bool + depends on CPU_386 || CPU_486 || CPU_586TSC || CPU_686 || CPU_PENTIUMII || CPU_PENTIUMIII || CPU_PENTIUMM || CPU_PENTIUM4 + default y + +config CPU_WINCHIP + bool + depends on CPU_WINCHIPC6 || CPU_WINCHIP2 || CPU_WINCHIP3D + default y + +config CPU_ONLY_K7 + bool + depends on CPU_K7 && !CPU_INTEL && !CPU_K6 && !CPU_K8 && !X86_ELAN && !CPU_CRUSOE && !CPU_WINCHIP && !CPU_CYRIXIII && !CPU_VIAC3_2 + default y + +config CPU_ONLY_K8 + bool + depends on CPU_K8 && !CPU_INTEL && !CPU_K6 && !CPU_K7 && !X86_ELAN && !CPU_CRUSOE && !CPU_WINCHIP && !CPU_CYRIXIII && !CPU_VIAC3_2 + default y + +config CPU_ONLY_WINCHIP + bool + depends on CPU_WINCHIP && !CPU_INTEL && !CPU_K6 && !CPU_K7 && !CPU_K8 && !X86_ELAN && !CPU_CRUSOE && !CPU_CYRIXIII && !CPU_VIAC3_2 + default y # # Define implied options from the CPU selection here # config X86_CMPXCHG bool - depends on !M386 + depends on !CPU_386 default y config X86_XADD bool - depends on !M386 + depends on !CPU_386 default y config X86_L1_CACHE_SHIFT int - default "7" if MPENTIUM4 || X86_GENERIC - default "4" if MELAN || M486 || M386 - default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 - default "6" if MK7 || MK8 + default "7" if CPU_PENTIUM4 + default "6" if CPU_K7 || CPU_K8 || CPU_PENTIUMM + default "5" if CPU_WINCHIP || CPU_CRUSOE || CPU_CYRIXIII || CPU_K6 || CPU_PENTIUMIII || CPU_PENTIUMII || CPU_686 || CPU_586MMX || CPU_586TSC || CPU_586 || CPU_VIAC3_2 + default "4" if X86_ELAN || CPU_486 || CPU_386 config RWSEM_GENERIC_SPINLOCK bool - depends on M386 + depends on CPU_386 default y config RWSEM_XCHGADD_ALGORITHM bool - depends on !M386 + depends on !CPU_386 default y config X86_PPRO_FENCE bool - depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 + depends on CPU_686 default y config X86_F00F_BUG bool - depends on M586MMX || M586TSC || M586 || M486 || M386 + depends on CPU_586MMX || CPU_586TSC default y config X86_WP_WORKS_OK bool - depends on !M386 + depends on !CPU_386 default y config X86_INVLPG bool - depends on !M386 + depends on !CPU_386 default y config X86_BSWAP bool - depends on !M386 + depends on !CPU_386 default y config X86_POPAD_OK bool - depends on !M386 + depends on !CPU_386 default y config X86_ALIGNMENT_16 bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 + depends on CPU_WINCHIP || CPU_CYRIXIII || X86_ELAN || CPU_K6 || CPU_586MMX || CPU_586TSC || CPU_586 || CPU_486 || CPU_VIAC3_2 default y -config X86_GOOD_APIC +config X86_BAD_APIC bool - depends on MK7 || MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 + depends on CPU_586TSC default y config X86_INTEL_USERCOPY bool - depends on MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 + depends on CPU_K7 || CPU_K8 || CPU_PENTIUMII || CPU_PENTIUMIII || CPU_PENTIUMM || CPU_PENTIUM4 default y config X86_USE_PPRO_CHECKSUM bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 + depends on !CPU_386 && !CPU_486 && !CPU_586 && !CPU_586TSC && !CPU_586MMX && !X86_ELAN && !CPU_CRUSOE default y config X86_USE_3DNOW bool - depends on MCYRIXIII || MK7 + depends on !CPU_INTEL && !CPU_K6 && !CPU_K8 && !X86_ELAN && !CPU_CRUSOE && !CPU_WINCHIP && !CPU_VIAC3_2 default y config X86_OOSTORE bool - depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 + depends on CPU_ONLY_WINCHIP default y config HPET_TIMER @@ -512,7 +495,7 @@ config X86_TSC bool - depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2) && !X86_NUMAQ + depends on !X86_NUMAQ && !CPU_386 && !CPU_486 && !CPU_586 && !X86_ELAN && !CPU_WINCHIPC6 default y config X86_MCE --- linux-2.6.1/arch/i386/Makefile.old 2004-01-10 15:12:39.000000000 +0100 +++ linux-2.6.1/arch/i386/Makefile 2004-01-10 15:25:53.000000000 +0100 @@ -26,28 +26,48 @@ align := $(subst -functions=0,,$(call check_gcc,-falign-functions=0,-malign-functions=0)) -cflags-$(CONFIG_M386) += -march=i386 -cflags-$(CONFIG_M486) += -march=i486 -cflags-$(CONFIG_M586) += -march=i586 -cflags-$(CONFIG_M586TSC) += -march=i586 -cflags-$(CONFIG_M586MMX) += $(call check_gcc,-march=pentium-mmx,-march=i586) -cflags-$(CONFIG_M686) += -march=i686 -cflags-$(CONFIG_MPENTIUMII) += $(call check_gcc,-march=pentium2,-march=i686) -cflags-$(CONFIG_MPENTIUMIII) += $(call check_gcc,-march=pentium3,-march=i686) -cflags-$(CONFIG_MPENTIUM4) += $(call check_gcc,-march=pentium4,-march=i686) -cflags-$(CONFIG_MK6) += $(call check_gcc,-march=k6,-march=i586) +cpuflags-$(CONFIG_CPU_PENTIUM4) := $(call check_gcc,-march=pentium4,-march=i686) + +ifdef CONFIG_CPU_PENTIUM4 + cpuflags-$(CONFIG_CPU_K8) := $(call check_gcc,-march=pentium3,-march=i686) +else + cpuflags-$(CONFIG_CPU_K8) := $(call check_gcc,-march=k8,$(call check_gcc,-march=athlon,-march=i686 $(align)-functions=4)) +endif + # Please note, that patches that add -march=athlon-xp and friends are pointless. # They make zero difference whatsosever to performance at this time. -cflags-$(CONFIG_MK7) += $(call check_gcc,-march=athlon,-march=i686 $(align)-functions=4) -cflags-$(CONFIG_MK8) += $(call check_gcc,-march=k8,$(call check_gcc,-march=athlon,-march=i686 $(align)-functions=4)) -cflags-$(CONFIG_MCRUSOE) += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MWINCHIPC6) += $(call check_gcc,-march=winchip-c6,-march=i586) -cflags-$(CONFIG_MWINCHIP2) += $(call check_gcc,-march=winchip2,-march=i586) -cflags-$(CONFIG_MWINCHIP3D) += $(call check_gcc,-march=winchip2,-march=i586) -cflags-$(CONFIG_MCYRIXIII) += $(call check_gcc,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 -cflags-$(CONFIG_MVIAC3_2) += $(call check_gcc,-march=c3-2,-march=i686) +ifdef CONFIG_CPU_PENTIUM4 + cpuflags-$(CONFIG_CPU_K7) := $(call check_gcc,-march=pentium3,-march=i686) +else + cpuflags-$(CONFIG_CPU_K7) := $(call check_gcc,-march=athlon,-march=i686 $(align)-functions=4) +endif + +cpuflags-$(CONFIG_CPU_PENTIUMM) := $(call check_gcc,-march=pentium3,-march=i686) +cpuflags-$(CONFIG_CPU_PENTIUMIII) := $(call check_gcc,-march=pentium3,-march=i686) +cpuflags-$(CONFIG_CPU_PENTIUMII) := $(call check_gcc,-march=pentium2,-march=i686) +cpuflags-$(CONFIG_CPU_VIAC3_2) := $(call check_gcc,-march=c3-2,-march=i686) +cpuflags-$(CONFIG_CPU_CRUSOE) := -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 +cpuflags-$(CONFIG_CPU_686) := -march=i686 + +# supports i686 without cmov +cpuflags-$(CONFIG_CPU_CYRIXIII) := $(call check_gcc,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0 + +cpuflags-$(CONFIG_CPU_K6) := -march=k6 +cpuflags-$(CONFIG_CPU_586MMX) := $(call check_gcc,-march=pentium-mmx,-march=i586) + +# Winchip supports i586 +cpuflags-$(CONFIG_CPU_WINCHIPC6) := $(call check_gcc,-march=winchip-c6,-march=i486) +cpuflags-$(CONFIG_CPU_WINCHIP2) := $(call check_gcc,-march=winchip2,-march=i486) +cpuflags-$(CONFIG_CPU_WINCHIP3D) := $(call check_gcc,-march=winchip2,-march=i486) + +cpuflags-$(CONFIG_CPU_586TSC) := -march=i586 +cpuflags-$(CONFIG_CPU_586) := -march=i586 +cpuflags-$(CONFIG_X86_ELAN) := -march=i486 +cpuflags-$(CONFIG_CPU_486) := -march=i486 +cpuflags-$(CONFIG_CPU_386) := -march=i386 + -CFLAGS += $(cflags-y) +CFLAGS += $(cpuflags-y) # Default subarch .c files mcore-y := mach-default --- linux-2.6.1/include/asm-i386/module.h.old 2004-01-10 15:12:39.000000000 +0100 +++ linux-2.6.1/include/asm-i386/module.h 2004-01-10 15:24:14.000000000 +0100 @@ -26,6 +26,8 @@ #define MODULE_PROC_FAMILY "PENTIUMII " #elif defined CONFIG_MPENTIUMIII #define MODULE_PROC_FAMILY "PENTIUMIII " +#elif defined CONFIG_MPENTIUMM +#define MODULE_PROC_FAMILY "PENTIUMM " #elif defined CONFIG_MPENTIUM4 #define MODULE_PROC_FAMILY "PENTIUM4 " #elif defined CONFIG_MK6 @@ -49,7 +51,7 @@ #elif CONFIG_MVIAC3_2 #define MODULE_PROC_FAMILY "VIAC3-2 " #else -#error unknown processor family +#define MODULE_PROC_FAMILY "this needs to be fixed" #endif #define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/