Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Miquel Raynal <miquel.raynal@bootlin.com>
To:     Gregory Clement <gregory.clement@bootlin.com>,
        Jason Cooper <jason@lakedaemon.net>,
        Andrew Lunn <andrew@lunn.ch>,
        Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
        Bjorn Helgaas <bhelgaas@google.com>
Cc:     <devicetree@vger.kernel.org>, Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        linux-pci@vger.kernel.org, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        Antoine Tenart <antoine.tenart@bootlin.com>,
        Maxime Chevallier <maxime.chevallier@bootlin.com>,
        Nadav Haklai <nadavh@marvell.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>
Subject: [PATCH 06/12] dt-bindings: PCI: aardvark: describe the reset-gpios property
Date:   Fri, 23 Nov 2018 15:18:25 +0100
Message-Id: <20181123141831.8214-7-miquel.raynal@bootlin.com>
In-Reply-To: <20181123141831.8214-1-miquel.raynal@bootlin.com>
References: <20181123141831.8214-1-miquel.raynal@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

A GPIO might be used to reset the PCI IP. Describe the property needed
in this case.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 Documentation/devicetree/bindings/pci/aardvark-pci.txt | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
index 310ef7145c47..252934237138 100644
--- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt
+++ b/Documentation/devicetree/bindings/pci/aardvark-pci.txt
@@ -20,6 +20,10 @@ contain the following properties:
    define the mapping of the PCIe interface to interrupt numbers.
  - bus-range: PCI bus numbers covered
 
+The following are optional properties:
+
+ - reset-gpios: GPIO to reset the device
+
 In addition, the Device Tree describing an Aardvark PCIe controller
 must include a sub-node that describes the legacy interrupt controller
 built into the PCIe controller. This sub-node must have the following
@@ -48,6 +52,7 @@ Example:
 				<0 0 0 2 &pcie_intc 1>,
 				<0 0 0 3 &pcie_intc 2>,
 				<0 0 0 4 &pcie_intc 3>;
+		reset-gpios = <&gpiosb 3 GPIO_ACTIVE_HIGH>;
 		pcie_intc: interrupt-controller {
 			interrupt-controller;
 			#interrupt-cells = <1>;
-- 
2.19.1