Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Shawn Guo <shawn.guo@linaro.org>
To:     Kishon Vijay Abraham I <kishon@ti.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Sriharsha Allenki <sallenki@codeaurora.org>,
        Anu Ramanathan <anur@codeaurora.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Vinod Koul <vkoul@kernel.org>, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Shawn Guo <shawn.guo@linaro.org>
Subject: [PATCH v5 0/2] Add Synopsys High-Speed USB PHY driver for Qualcomm SoCs
Date:   Tue, 27 Nov 2018 18:07:20 +0800
Message-Id: <20181127100722.9993-1-shawn.guo@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

It's based on a downstream driver from Sriharsha Allenki <sallenki@codeaurora.org>
that uses USB phy framework, and gets rewrote to adpot generic phy
framework together with quite some cleanups.

Changes for v5:
 - Drop mb() call from function qcom_snps_hsphy_init_sequence() and
   qcom_snps_hsphy_por_reset().

Changes for v4:
 - Kill device tree property 'qcom,init-seq' by moving the settings
   into phy driver as device match data.

Changes for v3:
 - Use SoC specific compatible "qcom,qcs404-usb-hsphy".
 - Use OF graph instead of extcon bindings to model the link to USB
   connector.

Changes for v2:
 - Add a pointer to phy/phy-bindings.txt for property #phy-cells.
 - Roll back voltage settings in case function
   qcom_snps_hsphy_config_regulators() fails in the middle.
 - Add a comment for init-seq tuple which consists of 3 numbers.
 - Sort include headers alphabetically.
 - Sort register definitions in order of offset.

Shawn Guo (1):
  phy: qualcomm: Add Synopsys High-Speed USB PHY driver

Sriharsha Allenki (1):
  dt-bindings: phy: Add Qualcomm Synopsys High-Speed USB PHY binding

 .../phy/qcom,snps-28nm-usb-hs-phy.txt         |  87 +++
 drivers/phy/qualcomm/Kconfig                  |  10 +
 drivers/phy/qualcomm/Makefile                 |   1 +
 .../phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c  | 529 ++++++++++++++++++
 4 files changed, 627 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,snps-28nm-usb-hs-phy.txt
 create mode 100644 drivers/phy/qualcomm/phy-qcom-usb-hs-snsp-28nm.c

-- 
2.18.0