Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67;
From:   Christophe Kerello <christophe.kerello@st.com>
To:     <boris.brezillon@bootlin.com>, <miquel.raynal@bootlin.com>,
        <richard@nod.at>, <dwmw2@infradead.org>,
        <computersforpeace@gmail.com>, <marek.vasut@gmail.com>,
        <robh+dt@kernel.org>, <mark.rutland@arm.com>
CC:     <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        Christophe Kerello <christophe.kerello@st.com>
Subject: [ v3 0/3] mtd: rawnand: add STM32 FMC2 NAND flash controller driver
Date:   Thu, 29 Nov 2018 17:41:00 +0100
Message-ID: <1543509663-26128-1-git-send-email-christophe.kerello@st.com>
MIME-Version: 1.0
Content-Type: text/plain
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk

This patchset adds the support for the STMicroelectronics FMC2 NAND flash
controller found on STM32MP SOCs.

This patchset supports:
  - the command sequencer feature, a hardware accelerator for read/write
    within a page
  - the manual mode feature, useful for debug purpose
  - a maximum 8k page size
  - following ECC strength and step size
	- nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8)
	- nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4)
	- nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended
	  ecc based on HAMMING)
    
This patchset has been tested on Micron MT29F8G08ABACAH4 (8-bit SLC NAND)
and MT29F8G16ABACAH4 (16-bit SLC NAND)

Changes v3:
 - modify clocks property description
 - add NAND reg property description
 - stm32_fmc2_nfc inherits from nand_controller structure
 - rewrite stm32_fmc2_read_data/stm32_fmc2_write_data functions
   to handle aligned and not aligned buffers
 - replace uint8_t by u8
 - use of NAND_ROW_ADDR_3 option

Changes v2:
 - separate the controller structure and the NAND chip structure
 - remove timings description from the device tree
 - fix typo issues
 - fix kbuildrobot issues

Christophe Kerello (3):
  dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller
    documentation
  mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  mtd: rawnand: stm32_fmc2: add manual mode

 .../devicetree/bindings/mtd/stm32-fmc2-nand.txt    |   61 +
 drivers/mtd/nand/raw/Kconfig                       |    9 +
 drivers/mtd/nand/raw/Makefile                      |    1 +
 drivers/mtd/nand/raw/stm32_fmc2_nand.c             | 2073 ++++++++++++++++++++
 4 files changed, 2144 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mtd/stm32-fmc2-nand.txt
 create mode 100644 drivers/mtd/nand/raw/stm32_fmc2_nand.c

-- 
1.9.1